In this study, the distribution, proportion and characteristics of internal defects in three kinds of powders of Ti-6Al-4V, 316-steel and Co-29Cr-6Mo alloys, produced by the plasma rotating electrode process (PREP) at various rotation speeds, are characterized by using both scanning electron microscopy (SEM) and synchrotron X-ray computed tomography (CT). The results show that in the powder of a given alloy, internal pores are formed more easily in coarse particles than in fine powder during PREP. The proportion of powder with pores can be reduced by appropriately increasing the rotation speed. In addition, the composition of an alloy has a great influence on the defect formation.
1 February 2021 in Materials Science and Engineering: C
Silicon oxycarbide (SiOC), Ca- and Mg-modified silicon oxycarbide (SiCaOC and SiMgOC) were synthesized via sol–gel processing with subsequent pyrolysis in an inert gas atmosphere. The physicochemical structures of the materials were characterized by XRD, SEM, FTIR, and 29Si MAS NMR. Biocompatibility and in vitro bioactivity were detected by MTT, cell adhesion assay, and simulated body fluid (SBF) immersion test. Mg and Ca were successfully doped into the network structure of SiOC, and the non-bridging oxygens (NBO) were formed. The hydroxycarbonate apatite (HCA) was formed on the modified SiOC surface after soaking in simulated body fluid (SBF) for 14 days, and the HCA generation rate of SiCaOC was higher than that of SiMgOC. Accompanying the increase of bioactivity, the network connectivity (NC) of the modified SiOC decreased from 6.05 of SiOC to 5.80 of SiCaOC and 5.60 of SiMgOC. However, structural characterization and biological experiments revealed the nonlinear relationship between the biological activity and NC of the modified SiOC materials.
Silicon oxycarbide (SiOC) ceramics are prone to failure prematurely in high-temperature applications for thermal stress-induced cracks. Doping Ti into SiOC can improve the oxidation resistance by forming a SiO2-TiO2 composite oxide layer. In this study, the oxidation behavior of Ti-doped SiOC ceramics in air at 1500 °C for 32 h was examined comprehensively. SiTiOC ceramics with a titanium-to-silicon molar ratio of 0.05 demonstrated the best oxidation resistance. The oxide layer was enhanced by the distribution of TiO2 and TiSiO4 at the grain boundaries of SiO2, which reduced the interfacial energy and inhibited crack propagation. Furthermore, the oxide layer composed primarily of SiO2 and minor TiO2 exhibited low oxygen diffusion coefficients and strong self-healing capability. However, increasing the titanium-to-silicon molar ratio to 0.2 generated many pores and cracks in the oxide layer, and the outward diffusion of Ti and active oxidation of TiC were been exacerbated during oxidation.