Adsorption technologies are a focus of interest for the removal of pollutants in water treatment systems. These removal methods offer several design, operation and efficiency advantages over other wastewater remediation technologies. Particularly, graphene oxide (GO) has attracted great attention due to its high surface area and its effectiveness in removing heavy metals. In this work, we study the functionalization of GO with zinc oxide nanoparticles (ZnO) to improve the removal capacity of aluminum (Al) and copper (Cu) in acidic waters. Experiments were performed at different pH conditions (with and without pH adjustment). In both cases, decorated GO (GO/ZnO) nanocomposites showed an improvement in the removal capacity compared with non-functionalized GO, even when the pH of zero charge (pH_PZC) was higher for GO/ZnO (5.57) than for GO (3.98). In adsorption experiments without pH adjustment, the maximum removal capacities for Al and Cu were 29.1 mg/g and 45.5 mg/g, respectively. The maximum removal percentages of the studied cations (Al and Cu) were higher than 88%. Further, under more acidic conditions (pH 4), the maximum sorption capacities using GO/ZnO as adsorbent were 19.9 mg/g and 33.5 mg/g for Al and Cu, respectively. Moreover, the removal percentages reach 95.6% for Al and 92.9% for Cu. This shows that decoration with ZnO nanoparticles is a good option for improving the sorption capacity of GO for Cu removal and to a lesser extent for Al, even when the pH was not favorable in terms of electrostatic affinity for cations. These findings contribute to a better understanding of the potential and effectiveness of GO functionalization with ZnO nanoparticles to treat acidic waters contaminated with heavy metals and its applicability for wastewater remediation.

Due to the unique properties of carbon nanotubes (CNTs), they have attracted great research attention as an emergent technology in many applications including water and wastewater treatment. However, raw CNTs have few functional groups, which limits their use in heavy metal removal. Nevertheless, their removal properties can be improved by oxidation processes that modify its surface. In this study, we assessed the capacity of oxidized and double-oxidized multiwalled carbon nanotubes (MWCNTs) to remove heavy metals ions from acidic solutions. The MWCNTs were tested for copper (Cu), manganese (Mn), and zinc (Zn) removal, which showed an increment of 79%, 78%, and 48%, respectively, with double-oxidized MWCNTs compared to oxidized MWCNTs. Moreover, the increase in pH improved the sorption capacity for all the tested metals, which indicates that the sorption potential is strongly dependent on the pH. The kinetic adsorption process for three metals can be described well with a pseudo-second-order kinetic model. Additionally, in multimetallic waters, the sorption capacity decreases due to the competition between metals, and it was more evident in the removal of Zn, while Cu was less affected. Besides, XPS analysis showed an increase in oxygen-containing groups on the MWCNTs surface after oxidation. Finally, these analyses showed that the chemical interactions between heavy metals and oxygen-containing groups are the main removal mechanism. Overall, these results contribute to a better understanding of the potential use of CNTs for water treatment.

In recent years, carbon nanotubes (CNTs) have been intensively studied as an effective adsorbent for the removal of pollutants from wastewater. One of the main problems for its use corresponds to the agglomeration of the CNTs due to the interactions between them, which prevents using their entire surface area. In this study, we test the effect of dispersion of oxidized multi-walled carbon nanotubes (MWCNTs) on the removal of heavy metals from acidic solutions. For this, polyurethane filters were dyed with a well-dispersed oxidized MWCNTs solution using chemical and mechanical dispersion methods. Filters were used in column experiments, and the sorption capacity increased more than six times (600%) compared to experiments with suspended MWCNTs. Further, kinetic experiments showed a faster saturation on MWCNTs in column experiments. These results contribute to a better understanding of the effect of dispersion on the use of CNTs as heavy metal ions adsorbent.

Water scarcity is a problem of global relevance that is affecting more and more people in the world. Latin America and the Caribbean (LAC) have around 35% of the world’s renewable water resources. However, the management of water resources and inequality in access to water has made water scarcity a problem of growing interest in the region. The reuse of water could be an efficient measure to reduce the demand for water resources in the area. In particular, the reuse of greywater is a simple and decentralized method of water reuse, which would mitigate the impact of the lack of water in isolated or difficult-to-access areas. Using the Aquastat database, water consumption in the world and water availability in LAC were studied. In addition, the regulatory framework for water in LAC countries was studied, with an emphasis on water reuse and greywater legislation. Agriculture is one of the most demanding of water in the world, particularly, in LAC, which demands around 70% of renewable water resources. Furthermore, in LAC, the availability of drinking water in rural areas is lacking, with seven countries having less than 80% access to healthy drinking water. The water regulation in LAC is quite heterogeneous. The most general regulation around water is found in the political constitutions of each country. Some constitutions explicitly indicate access to water as a human right, while other constitutions do not include information in this regard. Although some countries have specific regulations on the reuse of wastewater, there is a general lack of regulations related to the reuse of greywater. In most cases, the term “greywater” is not even defined in the general water and wastewater laws. As of the date of this article, only Chile, Peru, and Brazil have bills to regulate the reuse of greywater, of which only the Chilean is approved. The reuse of greywater could help reduce water demand for non-drinking uses. However, the implementation of greywater treatment systems represents a cost that is difficult to cover, especially in the poorest countries of the region. Countries must improve their public policies to improve the management, use and reuse of water to mitigate water scarcity that severely affects human consumption in the region. The relevance of this study lies in providing a general framework of the water situation in LAC for studies and public policies focused on promoting water reuse as a measure to mitigate water scarcity.

Water pollution by heavy metals has significant effects on aquatic ecosystems. Copper is one of the heavy metals that can cause environmental pollution and toxic effects in natural waters. This encourages the development of better technological alternatives for the removal of this pollutant. This work explores the application of ZnO nanoparticles (ZnO-NPs) for the removal of Cu(II) ions from acidic waters. ZnO NPs were characterized and adsorption experiments were performed under different acidic pHs to evaluate the removal of Cu(II) ions with ZnO NPs. The ZnO NPs were chemically stable under acidic conditions. The adsorption capacity of ZnO NPs for Cu(II) was up to 47.5 and 40.2 mg·g⁻¹ at pH 4.8 and pH 4.0, respectively. The results revealed that qmax (47.5 mg·g⁻¹) and maximum removal efficiency of Cu(II) (98.4%) are achieved at pH = 4.8. In addition, the surface roughness of ZnO NPs decreases approximately 70% after adsorption of Cu(II) at pH 4. The Cu(II) adsorption behavior was more adequately explained by Temkin isotherm model. Additionally, adsorption kinetics were efficiently explained with the pseudo-second-order kinetic model. These results show that ZnO NPs can be an efficient alternative for the removal of Cu(II) from acidic waters and the adsorption process was more efficient under pH = 4.8. This study provides new information about the potential application of ZnO NPs as an effective adsorbent for the remediation and treatment of acidic waters contaminated with Cu(II).