An optically efficient liquid-crystal display (LCD) structure using a patterned quantum dot (QD) film and a short-pass filter (SPF) was proposed and fabricated. The patterned QD film contributed to the generation of 95% in the area ratio (or 90% in the coverage ratio) of the Rec. 2020 color gamut. This was achieved by avoiding the problem of interaction between white backlight and broad transmittance spectra of color filters (CFs) as seen in a conventional LCD with a mixed QD film as a reference. The patterned QD film can maintain the narrow bandwidth of the green and the red QD colors before passing through the CFs. Additionally, the optical intensities of the red, green, and blue spectra were enhanced to 1.63, 1.72, and 2.16 times the reference LCD values, respectively. This was a result of separated emission of the red and green patterned QD film and reflection of the red and green light to the forward direction by the SPF.
We have fabricated highly luminescent and stable white light-emitting diodes (WLEDs) by directly incorporating CIS/ZnS quantum dots (QDs) into silicone resins using the thiol group. First, QD-containing phenyl-vinyl-oligosiloxane base resins were prepared by an in situ condensation reaction of sol–gel precursors and QDs with and without 3-(mercaptopropyl)trimethoxysilane. Next, base resins were cured with the crosslinker resin through hydrosilylation to fabricate QD-containing phenyl hybrimer (QDPH) resins. We found that the QDPH resin containing a thiol group exhibited higher transmittance and quantum efficiency than that without the thiol group because of more uniform dispersion of QDs. Finally, fabrication of WLEDs with the thiol-containing resin exhibited enhancements over that without the thiol group with regard to photo and thermal stabilities, color conversion and luminous efficiencies, and color accuracy. These enhancements were attributed to the stronger interaction between QDs and the polymer network through the thiol-anchoring group.
We proposed an optical simulation model for the quantum dot (QD) nanophosphor based on the mean free path concept to understand precisely the optical performance of optoelectronic devices. A measurement methodology was also developed to get the desired optical characteristics such as the mean free path and absorption spectra for QD nanophosphors which are to be incorporated into the simulation. The simulation results for QD-based white LED and OLED displays show good agreement with the experimental values from the fabricated devices in terms of spectral power distribution, chromaticity coordinate, CCT, and CRI. The proposed simulation model and measurement methodology can be applied easily to the design of lots of optoelectronics devices using QD nanophosphors to obtain high efficiency and the desired color characteristics.
We propose an enhanced quantitative three-dimensional measurement system using wavelength-multiplexed digital holography. To simplify the configuration, a dual-peak quantum dot wavelength converter, combined with a blue LED, is adapted as a single low-coherence light source. Rather than a conventional dual-wavelength method, which records and reconstruct the object wave for each wavelength, the proposed system can capture the holograms of two wavelengths simultaneously with fewer acquisitions, simple setup, and low noise. To verify the system’s performance, the measurements of the step height sample are presented.
19 July 2016 in Japanese Journal of Applied Physics
A new structure for white organic light-emitting diode (OLED) displays with a patterned quantum dot (QD) film and a long pass filter (LPF) was proposed and evaluated to realize both a high color gamut and high optical efficiency. Since optical efficiency is a critical parameter in white OLED displays with a high color gamut, a red or green QD film as a color-converting component and an LPF as a light-recycling component are introduced to be adjusted via the characteristics of a color filter (CF). Compared with a conventional white OLED without both a QD film and the LPF, it was confirmed experimentally that the optical powers of red and green light in a new white OLED display were increased by 54.1 and 24.7% using a 30 wt % red QD film and a 20 wt % green QD film with the LPF, respectively. In addition, the white OLED with both a QD film and the LPF resulted in an increase in the color gamut from 98 to 107% (NTSC ratio) due to the narrow emission linewidth of the QDs.
An optically efficient structure was proposed and fabricated to realize high brightness organic light emitting diode (OLED) displays based on a white OLED prepared with the air-gapped bridges on the quantum dot (QD) patterns. Compared with a conventional white OLED display, in our experiments, the optical intensity of the proposed OLED display shows the enhancement of 58.2% in the red color and 16.8% in the green color after applying the air-gapped bridge structure on QD patterns of 20 wt% concentration. This enhancement comes from the two facts that the QD patterns downconvert unnecessary blue or blue/green light to the required green or red light and the air-gapped bridges increase the color conversion efficiency of QDs by optical recycling using total internal reflection (TIR) at the interface. In addition, the color gamut of the proposed OLED display increases from 65.5 to 75.9% (NTSC x, y ratio) due to the narrow emission spectra of QDs.