Carbon-based nanofillers have emerged as promising agents for enhancing the mechanical properties of polyamide 66 (PA66). This literature review emphasizes the increasing interest in nanocomposites due to their ability to significantly improve material properties, often surpassing traditional short fiber reinforced polymers, even at low nanofiller loadings. Across the studies reviewed, consistent enhancements in various quasi-static mechanical properties are observed upon the incorporation of nanofillers. Optimal carbon-based nanofiller loadings typically fall within the range of 0.25% to 1 wt%. Notably, significant improvements have been reported, with increases of up to 78% in Young’s modulus (E) and 138% in ultimate tensile strength (UTS). This comprehensive analysis highlights the potential of carbon-based nanofillers in enhancing the performance of polyamide 66, offering valuable insights for the design and development of advanced nanocomposite materials. Preliminary test results by the authors, where melt mixing was employed to produce PA66 carbon nanotube (CNT) nanocomposites with loadings of up to 1 wt%, show an increase in Young’s modulus whilst the ultimate tensile strength and strain at break (SaB) are reduced.