Salam K. Al Kadhim Hasan Al Dawery

Prof. Dr. Salam K. Al Kadhim Hasan Al Dawery


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2019 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
SDSalam K. Al Kadhim Hasan Al Dawery
Salam K. Al Kadhim Hasan Al Dawery
SASaleh K. Al-Shereiqi
Saleh K. Al-Shereiqi
The effectiveness of using waste bio materials as viscosity reducing agents was investigated on light and heavy crude oils of Oman. The selected materials are fiber of palm tree, date palm kernel and walnut shell. The utilization of waste bio materials is not only considered as a cost effective, but, environmentally friendly and has less effect on crude oil processing as compared to that of chemical additives. In this study, special piping structure was constructed to measure flowabilty time of crude oil. It was observed that use of bio materials reduced oil flowability time by range of 42–50% using particle size 75 µm and by 66% using particle size 150 µm. Moreover, the effect of different additives and various concentrations of bio materials on oil rheological properties, for instance viscosity and yield stress, were also studied. Results showed that the light crude oil exhibits a non-Newtonian viscoplastic behavior following (Bingham plastic model) whereas the heavy crude oil exhibits a non-Newtonian pseudoplastic behavior (shear thinning model). The use of bio materials reduced the limiting viscosities of the light crude oils by 62% using particle size 75 µm and 75% using particle size 150 µm. However, limiting viscosity of heavy crude oil was reduced by 15%. In addition, it was observed that using bio materials lowered yield shear; light crude reduced by average 32% while heavy crude oil reduced by 10%.

17 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
SDSalam K. Al Kadhim Hasan Al Dawery
Salam K. Al Kadhim Hasan Al Dawery
GAGhadeer E. Al-Yaqoubi
Ghadeer E. Al-Yaqoubi
AAAhoud A. Al-Musharrafi
Ahoud A. Al-Musharrafi
Hamed Nasser HarharahHamed Nasser Harharah
Hamed Nasser Harharah
Abdelfattah AmariAbdelfattah Amari
Abdelfattah Amari
Ramzi HarharahRamzi Harharah
Ramzi Harharah
Fish-process wastewater industries are a significant source of environmental pollutions and biohazard to humans and other living organisms due to suspended organics, phosphorus, and nitrate that causes environmental damage. In this study, the treatment of two types of fish wastewater was examined by applying chemical and physical methods. The chemical treatments using positive polyelectrolyte with a concentration of 25 ppm reduced the turbidity of fish wastewater by 50%; conductivity was reduced by 50% and pH was reduced from 8 to 7.2. Meanwhile, using negative polyelectrolyte and mixed polymers reduced the turbidity of fish wastewater by 30%. For applying natural material as a physical adsorbent, several natural materials were examined: ocimum leaves, Boswellia sacra leaves, Al-Shakher leaves, tephrosia leaves, neem leaves, mentha leaves, jand peel, neem wood, ocimum fruit, olive fruit peel, and palm anguish for the treatment of the fish wastewater. The initial tests indicated that the best material was palm anguish. FTIR, SEM, and EDS were used for the characterization of palm anguish. The selected material was treated with 1 M of NaOH solution. Different bed heights (10, 20, and 30 cm) of Palm anguish were applied. The results showed 80% and 85% reduction in the turbidity in both types of fish wastewater, especially with a bed height of 30 cm of the fish wastewater treated with NaOH, respectively. Notably, this study distinguishes itself by utilizing polyacrylamide flocculants of varying densities and by employing palm anguish as a natural adsorbent, which can sufficiently improve the treatment of fish-processing wastewater.

1 February 2016 in Desalination and Water Treatment
Verified
Journal Article
Open access
SDSalam K. Al Kadhim Hasan Al Dawery
Salam K. Al Kadhim Hasan Al Dawery
Activated carbon (AC) has been used as an adsorbent for centuries as a result of its ability to remove a large variety of compounds from contaminated waters. The objective of this study was to investigate the removal of methanol by adsorption and the use of advanced oxidation process for the regeneration of the exhausted AC as an alternative to thermal, biological, and chemical methods that are currently applied. Several experimental tests were carried out to examine the ability of AC for adsorbing methanol from methanol–water mixture. The results show fast saturation of the AC and short breaking time, especially for solutions consisting of methanol above 3% vol. However, adsorption capacity of exhausted AC with methanol, after washing, showed an improvement in its adsorption capacity over that of fresh AC. This improvement may be due to that methanol may harsh the surface of AC causing an increase in the sizes of pores and cavities. Large cavities were micrograph using scanning electron microscope (SEM). After saturation, AC was regenerated using the photo-catalytic process, the adsorption capacity of AC was fully restored. The results showed that the titanium dioxide with the aid of UV light can easily regenerate the AC by oxidizing the organic compounds adsorbed on the surface of AC. It was observed that the increase of UV light intensity had a positive effect on adsorption capacity. However, the increases of TiO2 concentrations had a limited effect on the adsorption capacity of the AC.

9 July 2025 in Processes
Verified
Journal Article
Open access
PDF file
ASAbdus Sami
Abdus Sami
SASohail Ahmad
Sohail Ahmad
ASAi-Dang Shan
Ai-Dang Shan
SZSijie Zhang
Sijie Zhang
LFLiming Fu
Liming Fu
Assoc. Prof. Dr. Gasim HayderAssoc. Prof. Dr. Gasim Hayder
Assoc. Prof. Dr. Gasim Hayder
The rapid growth in population and industrialization have significantly increased global energy demand, placing immense pressure on finite and environmentally harmful conventional fossil fuel-based energy sources. In this context, the development of hybrid electrocatalysts presents a crucial solution for energy conversion and storage, addressing environmental challenges while meeting rising energy needs. In this study, the fabrication of a novel bifunctional catalyst, copper nickel aluminum spinel (Cu0.5Ni0.5Al2O4) supported on graphitic carbon nitride (GCN), using a solid-state synthesis process is reported. Because of its effective interface design and spinel cubic structure, the Cu0.5Ni0.5Al2O4/GCN nanocomposite, as synthesized, performs exceptionally well in electrochemical energy conversion, such as the oxygen evolution reaction (OER), the hydrogen evolution reaction (HER), and energy storage. In particular, compared to noble metals, Pt/C- and IrO2-based water-splitting cells require higher voltages (1.70 V), while for the Cu0.5Ni0.5Al2O4/GCN nanocomposite, a voltage of 1.49 V is sufficient to generate a current density of 10 mA cm−2 in an alkaline solution. When used as supercapacitor electrode materials, Cu0.5Ni0.5Al2O4/GCN nanocomposites show a specific capacitance of 1290 F g−1 at a current density of 1 A g−1 and maintain a specific capacitance of 609 F g−1 even at a higher current density of 5 A g−1, suggesting exceptional rate performance and charge storage capacity. The electrode’s exceptional capacitive properties were further confirmed through the determination of the roughness factor (Rf), which represents surface heterogeneity and active area enhancement, with a value of 345.5. These distinctive characteristics render the Cu0.5Ni0.5Al2O4/GCN composite a compelling alternative to fossil fuels in the ongoing quest for a viable replacement. Undoubtedly, the creation of the Cu0.5Ni0.5Al2O4/GCN composite represents a significant breakthrough in addressing the energy crisis and environmental concerns. Owing to its unique composition and electrocatalytic characteristics, it is considered a feasible choice in the pursuit of ecologically sustainable alternatives to fossil fuels.

1 April 2016 in Desalination and Water Treatment
Verified
Journal Article
Open access
SDSalam K. Al Kadhim Hasan Al Dawery
Salam K. Al Kadhim Hasan Al Dawery
Advanced oxidation process is a promising technology for remediation of organic pollutants at ambient conditions. Several experiments of photocatalytic decolorization of Tartrazine compound using TiO2 and UV light have been carried out for enhancing the characteristic of the oxidation kinetics. The experimental results revealed that photo oxidation process was strongly dependent on UV light intensity, and an improvement of 98% was achieved for 75% increase in the light intensity. The reaction rate constant in respect to UV light intensity was larger by order of 10 compared to other considered parameters. The second important parameter that affecting the decolorization rate was the hydraulic time constant (τ) showed an improvement of 79.4% of the decolorization process. The catalytic oxidation process is considered similar to a batch chemical reactor and covered by the first-order reaction rate. A negative impact of 66.67% was obtained by increasing the dye concentration. The results showed that the increased level of TiO2 concentration did not necessarily improve the rate of degradation of pollutant. The repeatability of photocatalytic process was also tested and after reusing the recycled TiO2, the rate of color degradation was still efficient with respect to initial dye concentration. It appeared that the photo-oxidation process was favorable at neutrality conditions or slightly higher pH for solutions consisting of anions.

19 March 2021 in International Journal of Environmental Science and Technology
Verified
Journal Article
Closed access
PDF file
SDSalam K. Al Kadhim Hasan Al Dawery
Salam K. Al Kadhim Hasan Al Dawery
SAS. H. K. Annamareddy
S. H. K. Annamareddy
MAM. K. H. Al-Mashhadani
M. K. H. Al-Mashhadani
HAH. A. Al-Abri
H. A. Al-Abri
FAF. H. Al-Hatmi
F. H. Al-Hatmi