This paper presents a novel double-sided structure multi-band antenna that cleverly combines a Koch snowflake structure with a hexagonal fractal structure; the front of the antenna features a right semicircle minus a half-order Koch snowflake structure, while the back of the antenna showcases a left semicircle minus half of a hexagonal fractal snowflake structure, which are combined together to form a complete circle. The antenna can cover common communication bands such as fourth to fifth generation (5G) commercial bands, ISM, WLAN, and Bluetooth. The structure of the radiator portion of the antenna is designed by iteratively scaling a basic arc shape multiple times based on a certain scale factor, and after simulation and comparison, three iterations can achieve the best antenna performance, and the antenna uses a microstrip line transmission to broaden the antenna bandwidth. The antenna covers three effective frequency bands: 2.38–2.90 GHz (20.3%), 3.35–3.85 GHz (14.1%), and 5.06–5.80 GHz (13.5%). The antenna dielectric sheet is made of RF-35 from Taconic, which has the advantages of high strength, complete surface inertness, and a long service life, with a dielectric constant of 3.5 and actual dimensions of 50 mm × 54 mm × 0.76 mm. The antenna is fractal-iterated in small dimensions, and the approximation of the frequency bands is accomplished by comparing the ratios of each iteration with the current vector map. The antenna was simulated by HFSS software (Version 21). and measured in an electromagnetic anechoic chamber, and the test results were consistent with the simulation results.
In this paper, based on bionics, a flexible multi-band antenna is designed to mimic the structure of a spider’s web, which supports various communication standards such as 4G, 5G, and GPS. The antenna lays out multiple loop branches in a limited space to achieve wideband operations from 1.31 GHz to 2 GHz (42.4%), from 3.4 GHz to 4 GHz (16.2%), and from 5.1 GHz to 5.78 GHz (12.5%). The antenna selects 40 × 50 × 0.1 mm³ polyimide as the dielectric substrate and trapezoidal coplanar waveguide feed. A simulation and experimental analyses demonstrate that the antenna exhibits consistent performance when subjected to different bending scenarios. The design scheme utilizing a flexible dielectric substrate streamlines the integration process, offering a promising avenue for deployment in smart wireless devices. The results of the consistent tests and simulations demonstrate that the device meets the requisite standards for wireless communication.
A dual-band flexible wearable MIMO antenna with two operating modes, namely low-frequency narrowband and high-frequency broadband, is proposed and investigated in this paper. The antenna is based on a polyimide (PI) flexible printed circuit (FPC) substrate and has a compact size (90 mm × 40 mm × 0.1 mm), enabling easy integration into helmet-mounted devices. The antenna elements are fed by a coplanar waveguide (CPW) and integrated with a ground decoupling structure, achieving an isolation of at least 23.4 dB between the two ports across the entire operating frequency band. In addition, the impedance-matching characteristics of the antenna under bending conditions and the Specific Absorption Rate (SAR) of this MIMO antenna in a 1 g human-tissue model at 3.7 GHz and 4.6 GHz were evaluated. The results indicate that the antenna’s key electromagnetic performance remains relatively stable under bending conditions, and the SAR values comply with international limit requirements, verifying its feasibility for application in head-worn terminals. With an impedance bandwidth of −10 dB, this antenna achieves dual-band coverage at 3.42–3.84 GHz (relative bandwidth of 11.6%) and 4.37–7.80 GHz (relative bandwidth of 56.4%), effectively meeting the requirements of 5G/6G communication frequency bands.