The TianQin Project is aiming at gravitational wave (GW) detection in space. TianQin GW observatory comprises three satellites orbiting on 1 × 105 km Earth orbits to form an equilateral-triangle constellation. In order to minimize the variations in arm lengths and breathing angles, the satellites must be launched and adjusted precisely into an optimized orbit. Therefore, satellite laser ranging must be used to enhance the precision of satellite orbit determination. To develop the capability of satellite laser ranging for TianQin’s orbit, the TianQin Laser Ranging Station has been designed and constructed to perform high-precision laser ranging for TianQin satellites and lunar laser ranging as well. Applying a 1064 nm Nd: YAG laser with 100 Hz repetition frequency, 80 pico-second pulse duration, and 2 × 2 array of superconducting nanowire single-photon detectors, we have obtained the laser echo signals from the five lunar retro-reflector arrays, and the measurement data have been packaged into 234 normal points (NPs), including a few data measured during the full-moon lunar phase. Each NP is calculated from continuous measurement for about ten minutes and the statistical error of the NPs is about 7 mm (1σ).
This study presents an integrated closed-loop framework for enhancing wind farm efficiency through high-accuracy, real-time wind field measurements obtained by a nacelle-mounted Doppler wind lidar (DWL). Addressing the limitations of static wake models and conventional supervisory control and data acquisition (SCADA) data, a precision wind field retrieval model was developed and rigorously calibrated against an anemometer tower, significantly improving measurement accuracy in complex terrains. By integrating these lidar-measured wind data continuously with an advanced wake and blockage model, we implemented real-time yaw and layout optimization strategies to mitigate wake deficits. Comprehensive simulations demonstrate the efficacy of this approach: layout optimization increased the Annual Energy Production (AEP) from 1193.74 GWh to 1209.31 GWh (a 1.30% gain), while subsequent wake steering optimization further boosted AEP from 1264.01 GWh to 1283.62 GWh (a 1.55% gain). Crucially, the study includes a thorough analysis of measurement uncertainties and yaw actuation rates, confirming the system’s robustness and operational feasibility even with inherent lidar errors. This work underscores the capability of integrating advanced remote sensing with real-time control, providing a validated pathway for significant performance improvements in operational wind farms.
In this paper, we propose a zoom auxiliary imaging lens based on the four-component mechanical zoom method for a modulation transfer function (MTF) test system. The auxiliary imaging lenses of the current MTF test system typically use fixed-focus optical systems, which are unable to meet the test scenarios of fast and batch measurement and measure lenses with an extensive focal length range. Compared with the fixed-focus auxiliary imaging lens, the zoom auxiliary imaging lens can simultaneously satisfy the measurement of wide-angle and telephoto miniature lenses without losing measurement accuracy. The entrance pupil distance of the zoom lens is greater than that of traditional lenses, and it is constant for each focal length of the zoom lens. The zoom lens uses an intermediate real image surface to obtain the perfect image quality and lower the diameter of the rear group. Additionally, the zoom lens dynamically adjusts magnification to optimize image size and align with the detector’s pixel resolution, thereby preventing undersampling and enhancing measurement precision. The optical design is optimized for stability, delivering high resolution and minimal aberrations across the zoom range. The image quality of the zoom lens is nearly at the diffraction limit at each focal length, which significantly reduces the impact of the auxiliary lens on MTF test results, enhancing both flexibility and accuracy. This design is particularly well suited for testing miniature lenses in optoelectronic technology applications.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement