Fluid flow in pipes plays an important role in different areas of academia and industry. Due to the importance of this kind of flow, several studies have involved circular cylindrical pipes. This paper aims to study fully developed internal laminar flow through a corrugated cylindrical duct, using the Galerkin-based integral method. As an application, we present a study using heavy oil with a relative density of 0.9648 (14.6 °API) and temperature-dependent viscosities ranging from 1715 to 13000 cP. Results for different fluid dynamics parameters, such as the Fanning friction factor, Reynolds number, shear stress, and pressure gradient, are presented and analyzed based on the corrugation number established for each section and aspect ratio of the pipe.
Recently, the liquid composite molding technique (LCM) has been used for producing fiber-reinforced polymer composites, since it allows the molding of complex parts, presenting good surface finishing and control of the mechanical properties of the product at the end of the process. Studies in this area have been focused on resin transfer molding (RTM), specifically on the resin rectilinear infiltration through the porous preform inserted in the closed cavity neglecting the sorption effect of the polymeric fluid by the reinforcement. Thus, the objective of this work is to predict resin radial flow in porous media (fibrous preform), including the effect of resin sorption by fibers considering a one-dimensional approach. For correct prediction of the flow behavior inside the porous media, an advanced modeling approach composed of the mass conservation equation and Darcy’s law is used, and the solution of the coupled equation is obtained. Transient results of the flow front location, velocity and pressure within the mold during the resin infiltration are shown, the effects of different parameters for resin (viscosity), reinforcement (sorption term, permeability and porosity) and process (injection pressure and injection radius) are analyzed, and an in-depth discussion is performed.
Simulate the rice drying process at specific drying conditions is of great interest to optimize the process and ensure a better quality of the final product. In the present work, experimental drying procedures of rough rice grains (BRSMG CONAI variety) was reported and drying kinetic was obtained at temperature using 40°C. The results were compared with simulated data by means of the liquid diffusion model equilibrium boundary condition. The geometry used to represent the rice grain was prolate spheroid. For this purpose, the diffusion equation, written in cylindrical coordinates, and solved via Galerkin-based integral method considering the constant diffusion coefficient. A good agreement was observed between predicted and experimental data. It was also possible to observe that the highest moisture gradients occur at the tip of the grain, which is region more affected by thermal and hydric stresses. The studied model can be used to solve problems involving diffusion processes, such as: drying, wetting, heating and cooling, provided that the geometrical shape of the body is similar to prolate spheroid.
This work aims to apply the SIR-type compartmental model (Susceptible - Infected - Removed) in the evolution of Covid-19 in Paraíba's State and Campina Grande City. For that, the parameters of the model were considered to be variable during time evolution, within an appropriate range. The system of differential equations was solved numerically using the Euler method. The parameters were obtained by adjusting the model to the infected data provided by the Paraíba Health Department. According to the results obtained, the model describes the infected population well. There was a reduction in the effective reproduction number in Paraíba and the town of Campina Grande. It is noteworthy that understanding the dynamics of infection transmission and evaluating the effectiveness of control measures is crucial to assess the potential for sustained transmission to occur in new areas. The model can also be applied to describe epidemic dynamics in other regions and countries.