Photoacoustic tomography (PAT), a promising medical imaging method that combines optical and ultrasound techniques, has been developing for decades mostly in preclinical application. A recent trend is to utilize the economical laser source to develop a low-cost sensing and imaging system, which aims at an affordable solution in clinical application. These low-cost laser sources have different modulation modes such as pulsed modulation, continuous modulation and coded modulation to generate different profiles of PA signals in photoacoustic (PA) imaging. In this paper, we review the recent development of the photoacoustic sensing and imaging based on the economical laser sources such as laser diode (LD) and light-emitting diode (LED) in different kinds of modulation types, and discuss several representative methods to improve the performance of such imaging systems based on low-cost laser sources. Finally, some perspectives regarding the future development of portable PAT systems are discussed, followed by the conclusion.
21 May 2020 in IEEE Transactions on Biomedical Circuits and Systems
Photoacoustic imaging (PAI), an emerging imaging technique, exploits the merits of both optical and ultrasound imaging, equipped with optical contrast and deep penetration. Typical linear PAI relies on a nanosecond laser pulse to induce photoacoustic signals. To construct a multi-wavelength PAI system, a multi-wavelength nano-second laser source is required, which greatly increases the cost of the PAI system. However, according to the nonlinear photoacoustic effect, the amplitude of the photoacoustic signals will vary with different base temperatures of the tissue. Therefore, using continuous-wave lasers with different wavelengths to induce different temperature variations at the same point of the tissue, and then using a single-wavelength pulsed laser to induce photoacoustic signals has been an alternative method to achieve multi-wavelength PAI. In this paper, based on the nonlinear photoacoustic effect, we developed a continuous-wave multi-wavelength laser source to cut down the cost of the conventional multi-wavelength PAI system. The principle will be introduced firstly, followed by qualitative and quantitative experiments.
9 July 2018 in IEEE Journal of Selected Topics in Quantum Electronics
Photoacoustic imaging has been intensively studied in recent years and many of the achievements have already been applied in clinical diagnosis and therapy, e.g., using spectroscopic photoacoustic imaging to extract functional and molecular information. However, spectroscopic photoacoustic imaging requires expensive and bulky tunable laser source, which severely hinders its further development toward a portable device. In this paper, we propose a novel imaging method, named optical spectroscopic ultrasound displacement (OSUD) imaging, which enables optical spectroscopic imaging in deep scattering tissue using multiple low-cost continuous-wave laser sources and ultrasound imaging equipment. The principle of the OSUD imaging method will be introduced, followed by preliminary experimental results. The OSUD imaging may exploit the deep penetration merit of ultrasound and provide another pathway to provide spectroscopic optical absorption contrast in deep scattering tissue beyond commonly used photoacoustic imaging, which will be further validated in the future work.
Photoacoustic (PA) imaging has attracted increasing research interest in recent years due to its unique merit of combining light and sound. Enabling deep tissue imaging with high ultrasound spatial resolution and optical absorption contrast, PA imaging has been applied in various application scenarios including anatomical, functional and molecular imaging. However, the bulky and expensive laser source is one of the key bottlenecks that needs to address for further compact system development. Photoacoustic imaging system based on low-cost laser diode is one of the promising solutions. In this paper, we report a custom-made fingertip laser diode system enabling both pulsed and continuous modulation modes with the shortest pulse width of 30 ns, driving current of 10 A, and single modulation frequency of 3 MHz, which is suitable for both time and narrow-band frequency domain PA imaging. The experiments for generating PA signals were performed with more than 70 millivolts signals amplitude. By sweeping the pulse width, it is observed that the amplitude of PA signals is increasing due to higher laser energy. To the best of our knowledge, this may be the most compact laser source used for photoacoustic applications for PA imaging. Owing to its super-compact size, the reported laser diode system could pave the pathway to low-cost photoacoustic sensing and imaging device, even wearable photoacoustic biomedical sensors.