The biodegradation of low-density Polyethylene (LDPE) is usually time-consuming, In the presence of Titania-nanoparticles, LDPE is photocatalytically degraded in smaller fragments afterward the bacteria can effectively degrade polyethylene. In the current study, potent polyethylene degrading bacteria were screened from the soil of the local dumpsite and identified using 16s rRNA sequencing. A protein-coated titania nanoparticle (TNPs) was synthesized using Sol-gel Method and characterized by X-ray crystallography, and Selected area electron diffraction-High-Resolution transmission electron microscopy. The photocatalytic biodegradation of LDPE (30 microns) in presence of 1M NaOH was studied by exposing it to UV irradiation, visible light, and high temperature (50˚C) for 21 days separately. All constitutes were assembled in test systems, photocatalytic biodegradation was assessed by monitoring % weight loss at every 7 days’ time interval, tensile strength, and Fourier Transform Infrared Spectroscopy. After 21 days of photocatalytic biodegradation, LDPE film containing both TNPs and Lactobacillus plantarum along with 1M NaOH in presence of visible light was unveiled oxidation and enumerated via the occurrence of a strong absorptions band of the carbonyl group (C=O) and also the breaking and weakening of existing absorptions bonds along with the new carbonyl functional group formation. The decline in tensile strength and elongation at break of LDPE was measured at 21% and 51% after 21 days. Thus, experimental results on LDPE after exposure to visible irradiation along with Lactobacillus plantarum and 5% protein-coated TNP showed improvement in degradation rate and elongation 59 % and 51% within 21 days, respectively in comparison to another study (49 % Weight loss and 12% elongation after 45 days). An excellent application of this research is significantly reduced plastic waste via a maintained procedure. GRAPHICAL ABSTRACT
This study focuses on addressing the pressing challenge of reusing plastic in an eco-friendly manner. This research aimed to produce synthetic grease through an environmentally friendly pyrolysis technique, utilizing 69% predegraded low-density polyethylene (LDPE) combined with visible-light-working TiO2 thin film, protein-coated TiO2 NPs, and Lactobacillus plantarum bacteria in a batch reactor. The optimized conditions of temperature (500 °C) and heating time (2 h) resulted in the creation of 166 gm of partially degraded polyethylene grease 2 (PDPLG2) with National Lubricating Grease Institute (NLGI 2) grade consistency. PDPLG2 grease exhibits a wide-range dropping point of 280 °C and effectively maintains lubrication under high friction and stress loads, thereby preventing wear. Thermal analysis using TG and DSC validated the grease’s stability up to 280 °C, with minimal degradation beyond this point. Taguchi analysis using substance, sliding speed, and load as factors identified the ideal process parameters as aluminum, 1500 rpm, and 150 N, respectively. The present study revealed that sliding speed has the greatest impact, contributing 31.74% to the coefficient of friction (COF) and 11.28% to wear, followed by material and load. Comparative tribological analysis with commercially available grease (NLGI2) demonstrated that PDPLG2 grease outperforms NLGI2 grease. Overall, this innovative eco-friendly approach presents PDPLG2 as a promising alternative lubricant with improved anti-wear and friction properties, while also contributing significantly to plastic waste reduction.
Plastic pollution, particularly from low-density polyethylene (LDPE), represents a major global environmental challenge due to its persistence and resistance to natural degradation. In this study, a novel synergistic strategy combining photocatalytic oxidation and microbial biodegradation was developed to enhance LDPE degradation. Rutile titanium dioxide (TiO₂) nanoparticles were synthesised via an eco-friendly sol - gel method and incorporated into LDPE at a concentration of 5 wt% to fabricate photocatalytically active composite films. Plastic-degrading bacteria isolated from plastic-contaminated soil were identified through 16S rRNA gene sequencing as Bacillus velezensis (NCBI Accession: PP499256). The LDPE-TiO₂ composite exhibited significantly enhanced degradation under visible light irradiation, achieving 85% weight loss within 21 days in the presence of B. velezensis, compared with 71% under ultraviolet irradiation and substantially lower degradation in untreated LDPE controls. Fourier Transform Infrared (FTIR) spectroscopy confirmed oxidative degradation through the formation of carbonyl functional groups, while Gas Chromatography-Mass Spectrometry (GC-MS) analysis identified degradation products including acetic acid, propanoic acid, octadecanoic acid, and erythritol, indicating progressive polymer oxidation and microbial metabolism. Furthermore, plant growth experiments using wheat, fenugreek, and green gram demonstrated enhanced germination, root elongation, and chlorophyll content without phytotoxicity. This integrated approach offers a sustainable strategy for plastic waste remediation and valorisation within a circular bioeconomy framework.