In this paper, the influence of cable behavior on cable-driven parallel robot (CDPR) is studied. This study is conducted with the goal of designing a medium size CDPR for additive manufacturing. This robot needs to have a high level of rigidity to guarantee a given tracking tool path error. First, the characterization of different thin cables (steel, Dyneema®, aramid) is presented. The mechanical properties of these cables, in terms of stiffness, damping, hysteresis, and creep are compared with regard to additive manufacturing applications. A stiffness model, which takes into account the cable preload, and a dynamic model of CDPR are proposed. The simulations of these two models are compared with experimental results obtained for the range of cables studied using dynamic stiffness analysis on an 8-cable fully constrained CDPR. This paper concludes on the type of cable that should be chosen for our application.
Soft grippers perform various handling tasks using passive conformability. This article reviews the improvements in their capabilities of dexterous manipulations, including how they achieve dexterity and how their performance could be evaluated. This article particularly points out the correlations between potential and real dexterity, and the relationship between the space of degrees of freedom and the corresponding dexterity level. Our main contribution is the proposition of a uniform framework for the characterization of soft grippers and their performance. We first present an introduction to soft grippers and those capable of in-hand manipulation. We emphasize their hybridization by combining soft and rigid materials or using several active materials. Next, we define and discuss the manipulation tasks and how to achieve dexterity, making a distinction between stable grasping and stable in-hand manipulation. We finally discuss the means to achieve assessment and how the performance can be evaluated, and we develop a general exploitable approach for characterizing soft grippers and their dexterous performance based on their architecture, DOF space, and physical performance.
This paper investigates the dynamic behavior of fully composite and hybrid metal–composite rotating shafts, including the effects of internal damping. The objective is to improve the performance of high-speed rotating shafts by proposing hybrid metal–composite designs as alternatives to conventional metallic shafts, in order to reduce vibration levels, shift critical speeds, and enhance damping capacity. A shell-based finite element model of a rotating laminated shaft was developed in ANSYS Workbench using the ACP module, accounting for internal damping via Rayleigh coefficients, rotary inertia, and gyroscopic effects. Due to ANSYS limitations in capturing gyroscopic effects in multilayered structures, Classical Laminate Theory (CLT) was used to homogenize multilayer configurations into equivalent single-layer shell elements. Experimental modal analysis was conducted to validate the numerical model at rest and to estimate the modal damping ratio for each mode. Then, the dynamic response of a Laval–Jeffcott rotor was analyzed across a speed range of 0–4800 rad/s, considering fully metallic, multilayer composite, and various hybrid metal–composite configurations with different stacking sequences and fiber orientations. The results show that natural frequencies are highly sensitive to laminate parameters. Gyroscopic effects lead to mode splitting in higher-order modes. The proposed homogenized shell model provides a robust framework for the analysis of internally damped laminated rotating shafts and supports the design of optimized hybrid rotors with improved vibrational performance.