This study presents numerical and experimental investigations on an oscillating water column (OWC) wave energy device integrated into a sloping breakwater. Regular waves were generated in a physical wave tank to investigate the hydrodynamic performance and extraction efficiency of the small-scale nested OWC device. Simultaneously, to complement various scenarios, numerical simulations were conducted using the open-source computational fluid dynamics platform OpenFOAM. The volume of fluid (VOF) method was employed to capture the complex evolution of the air–water interface, and an artificial source term (Forchheimer flow region) was introduced into the Navier–Stokes equations to replace the power take-off (PTO) system. By analyzing wave reflection properties, energy absorption efficiency, and wave run-up, the hydrodynamic characteristics of the inclined OWC device were explored. The comparison between the numerical and experimental results indicate a good consistence. A smaller front wall draft broadens the high-efficiency frequency bandwidth. For relatively long waves, increasing the air chamber width enhances energy conversion efficiency and reduces wave run-up. The optimal configuration was achieved with the following dimensionless parameters: front wall draft $a/h=1/3$, air chamber width $d_1/h=2/9$, and slope $i=2$. Due to the sloped structure, when compared with a vertical OWC, long waves can more easily enter the chamber. This causes the efficient frequency bandwidth to shift towards the low frequency range, allowing more wave energy to be converted into pneumatic energy. As a result, wave run-up is reduced, enhancing the protective function of the breakwater.

In this study, the energy harvesting mechanism of a two-degree-of-freedom (2-DOF) oscillating foil under near-surface conditions and the underlying influence of structural parameters are systematically investigated. Numerical simulations are conducted using the open-source CFD platform OpenFOAM and the waves2Foam toolbox. The free surface is captured using the volume of fluid (VOF) method, while the heave and pitch motions of the foil are simulated via the overWaveDyMFoam solver, coupling 6-DOF dynamic equations with the overset grid technique. The results demonstrate that the periodic evolution and shedding of the leading-edge vortex (LEV) fundamentally drive the self-sustained oscillation of the foil. Moreover, the phase synchronization between the fluid-induced force and the kinematic response serves as the core mechanism for efficient energy extraction. Structural parameters critically regulate these characteristics: stiffness coefficients dictate the natural frequency and phase coordination, thereby modulating the overall motion response. Notably, a local resonance occurs when the system’s natural frequency approaches the fluid’s vortex shedding frequency, inducing the maximum kinematic response. Within the investigated parameter space, the system achieves a peak energy harvesting efficiency of 45.6% and a maximum average power coefficient of 1.15. Finally, the damping coefficients are found to primarily govern the response amplitude and the viscous dissipation of the system.