Sophie Personnaz

Dr. Sophie Personnaz


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Zhongze WuZhongze Wu
Zhongze Wu
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
CWChao Wang
Chao Wang
JMJean-Claude Mipo
Jean-Claude Mipo
SPSophie Personnaz
Sophie Personnaz
PFPhilippe Farah
Philippe Farah
DC winding induced voltage pulsation in wound field switched flux (WFSF) machines causes DC winding current ripple and field excitation fluctuation, challenges the DC power source and deteriorates the control performance. Hence, reducing this pulsation is important in the design of a WFSF machine. In this paper, based on the analytical models, rotor skewing and rotor iron piece pairing are proposed and comparatively investigated by the finite element (FE) method to reduce the on-load DC winding induced voltage in WFSF machines having partitioned stators and concentrated AC windings. FE results show that peak to peak value of the on-load DC winding induced voltage in the analysed 12/10-pole partitioned stator WFSF (PS-WFSF) machines can be reduced by 78.42% or 77.16% by using rotor skewing or rotor pairing, respectively, whilst the torque density can be maintained by >90%. As for the 12/11-, 12/13- and 12/14-pole PS-WFSF machines, by using rotor iron piece inner arc pairing, the on-load DC winding induced voltage can be reduced by 64.11%, 52.12% and 76.49%, respectively, whilst the torque density can also be maintained by more than 90%. Prototypes are built and tested to verify the analytical and FE results.

14 July 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
SMSrinivas Mallampalli
Srinivas Mallampalli
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
JMJean Claude Mipo
Jean Claude Mipo
SPSophie Personnaz
Sophie Personnaz
Automotive starter-generator applications require a high peak torque for cranking and a wide speed flux weakening region for generation. In such applications, the pole-changing winding induction machine offers a wide speed flux weakening region with a low pole number and a high peak torque capability when operated with a higher number of poles. In this paper, a 6-phase, electronic pole-changing winding induction machine with improved performance over the existing 3-phase pole-changing is discussed. Compared to the 3-phase 120 degree phase belt winding, the proposed 6-phase pole-changing winding induction machine shows a 15 % increase in peak torque due to improved winding factor. Finite element analysis is used to predict the torque capability, losses and efficiency of the 6-phase and 3-phase pole-changing winding induction machines. A 1kW induction machine is prototyped and the improved torque capability of the 6-phase pole-changing machines over 3-phase counterparts is experimentally validated under various operating conditions.

22 July 2019 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
SCShun Cai
Shun Cai
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
JMJean-Claude Mipo
Jean-Claude Mipo
SPSophie Personnaz
Sophie Personnaz
A novel parallel hybrid excited (HE) machine with wide flux regulation range is proposed in this paper. The flux paths of PM and field winding are separated to avoid irreversible demagnetization and achieve improved flux regulation capability. Since the field winding and armature winding are located in the same stator slots, open-winding drive circuit can be employed to feed biased AC excitation in one set of winding and solve the spatial confliction of conventional hybrid excited machine. Finite element method (FEM) is utilized to analyze the electromagnetic performances of the proposed HE machine, in comparison with the original HE machine. It is revealed that the proposed HE machine exhibits lower PM excited back-EMF, which is beneficial to high speed fault tolerant operation. Besides, the torque density can be higher with flux enhancing, albeit with reduced PM usage. Finally, a prototype is manufactured and tested to validate the FE predictions.

31 December 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
SCShun Cai
Shun Cai
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
JMJean-Claude Mipo
Jean-Claude Mipo
SPSophie Personnaz
Sophie Personnaz
Hybrid excited machines, with synergies of permanent magnet (PM) and wound field (WF) excitations, exhibit high torque density as well as controllable flux and are perceived as promising candidate for variable speed application. A novel doubly salient hybrid excited (DSHE) machine with non-overlapped field winding is presented in this paper. It inherits simple structure of conventional doubly salient PM (DSPM) machine and facilitates the regulation of magnetic field by field winding. The electromagnetic performances of the proposed machine with different stator and rotor pole number combinations are investigated by finite element method (FEM), confirming these advantages. Furthermore, the effect of iron bridge on the hybridization between PM and WF excitations is analyzed to obtain a trade-off between high torque density and wide flux regulation range with the frozen permeability method (FPM). It is revealed that the proposed DSHE machine possesses higher power and fault tolerance at flux weakening region compared with the DSPM machine, albeit with sacrificed torque density and efficiency with introduction of field winding. Finally, a prototype is fabricated and tested to validate the theoretical analyses.

12 June 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
ZWZ. Z. Wu
Z. Z. Wu
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
CWC. Wang
C. Wang
JMJean-Claude Mipo
Jean-Claude Mipo
SPSophie Personnaz
Sophie Personnaz
PFPhillipe Farah
Phillipe Farah
DC winding induced voltage pulsation in the wound field synchronous machines (WFSMs) will cause DC winding current ripple, challenge the DC power supply and deteriorate the control performance, especially at a high speed. In this paper, the influence of DC winding configuration including the DC coil number and the parallel branch number on its induced voltage pulsation is investigated for WFSMs. Based on the modelling of both open-circuit and on-load DC winding induced voltages, the preferred DC winding configurations for WFSMs having various stator / rotor pole number combinations with double layer or single layer AC windings are obtained and validated by finite element (FE) analysis on four typical partitioned stator WFSMs (PS-WFSMs). A PS-WFSM prototype is built and tested to validate both analytical and FE analyses.

24 November 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SCShun Cai
Shun Cai
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
SMSrinivas Mallampalli
Srinivas Mallampalli
JMJean-Claude Mipo
Jean-Claude Mipo
SPSophie Personnaz
Sophie Personnaz
This paper investigates novel fractional slot non-overlapping winding hybrid excited (HE) machines with consequent pole permanent magnet (PM) rotors. The proposed machines accommodate the rotor PM and stator field winding separately, which has solved the spatial confliction of double excitations. Different consequent pole interior PM rotor configurations are extended to retain the PMs and utilize the flux concentrating effect. Then, the relationship of field and armature current ratio with the PM and wound field fluxes is identified theoretically, which provides design and optimization guidelines for the HE machines. Furthermore, the HE machines are optimized and compared with conventional PM machines. It is revealed the HE machines exhibit enhanced torque density with flux-enhancing field excitation, and extended operation range with flux-weakening field excitation. Besides, the HE machine utilizing flux concentrating effect exhibits the highest PM torque but sacrificed flux regulation capability due to magnetic saturation. Finally, the HE prototypes with different rotor configurations are fabricated and tested to validate the analyses.