The phase structure, thickness and corrosion resistance of oxidation film of 50 steel oxidized at 200∼600 °C in an air furnace were studied by AES, SEM, XRD and EIS in this paper. The results show that the concentration of surface oxygen atoms of 50 steel shows a trend of rapidly increasing to a peak, maintaining stability for a distance, then decreasing, and finally stabilizing after oxidation treatment at different temperatures. The peak concentration of oxygen atoms and the stabilization distance are found to vary with the oxidation temperature. The oxidation activation energy is 25.2 kJ/mol. With the increase of oxidation temperature, the oxide film composed of the outer Fe2O3 layer and the inner Fe3O4 layer is generated on the surface of 50 steel, and Fe2O3 is the primary constituent. Moreover, the corrosion of oxide film in NaCl solution is marked by anodic activation dissolution. The thermal oxidation samples demonstrate better corrosion resistance than the original samples with the increase of oxidation temperature, there is an upward trend in the self-corrosion potential, whereas a decreasing trend in the corrosion current density, and the capacitor-reactance arc radius is gradually increased. The maximum corrosion potential, the minimum corrosion current density and the largest capacitor-reactance arc radius are recorded at 600 °C, at which temperature it has the best corrosion resistance.
30 March 2020 in ACS Applied Materials & Interfaces
The morphology and microstructure of pearlite formed in 100Mn13 high-carbon high-manganese steel aged, respectively, at 525 °C and 650 °C after 1050 °C water toughening treatment were observed and analyzed by a scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that some pearlite colonies are chrysanthemum-like and are composed of M7C3 lamellae and ferrite lamellae, maintaining an orientation relationship (OR) of ()M7C3‖()α, []M7C3‖[]α. Moreover, the lamellae in pearlite colonies with chrysanthemum-like morphology are distributed in an emanative way, where there are protrusions and branches at the growth frontier. A growth physical model describing the growth process of chrysanthemum-like pearlite is proposed.