Fibers come from natural and fossil resources and are an essential commodity widely used by textile industries. Considering current supply and future demands, the repurposing of agricultural residues into fibers is an eco-friendly, attractive option that might mitigate environmental pollution. In this review, we have summarized multiple alternate secondary sources for fiber production, with a case study using banana plant residual biomass, a common agricultural waste in many developing countries. Specifically, in this review we have compared the different processing methods, e.g., chemical, mechanical, or biological methods, for repurposing agricultural residual biomass (including banana waste) into fibers. The development and analysis of an integrated biorefinery approach is needed to promote the fiber production from various agro-residual biomasses within the framework of circular bioeconomic concepts.

The objective of this study was to obtain start-up strategies for the operation of a dry anaerobic digestion (DAD) system treating pig-manure (PM) solids at low-temperatures, and evaluate the effects of operation mode, adapted inoculum, and bedding material on the performance. A DAD system coupled with an inoculum system (two-stage DAD) was operated at 20 ± 1 °C to digest PM solids (Total Solids, TS: 27%) with wheat straw or woodchips as bedding materials (TS substrate-mixture: 45%) using a liquid inoculum. Static DAD was also operated in parallel for comparison purposes. Overall, the percolation–recirculation mode of operation was superior to the static mode; the former had more than a 3-fold increase in specific methane yield in cycle 3. Using the adapted inoculum in cycle-2 improved methane yield by 7% and 26% for cycles 1 and 3, respectively, under the percolation–recirculation mode of operation. In addition, the digestate resulting from the digestion of woodchips + PM solids had better physical characteristics than wheat straw + PM solids. Thus, anaerobic digestion of pig-manure solids at low-temperatures with appropriate start-up strategies, inoculum, and bedding material is a promising technology for transforming PM solids into biogas and using its digestate as biofertilizer.

This study investigated the synergistic integration of clean technologies, specifically anaerobic digestion (AD) and struvite precipitation, to enhance nutrient recovery from chicken manure (CM). The batch experiments were conducted using (i) anaerobically digested CM digestate, referred to as raw sample (RS), (ii) filtered digestate sample (FS), and (iii) a synthetically prepared control sample (CS). The research findings demonstrated that the initial ammonia concentration variations did not significantly impact the struvite precipitation yield in the RS and FS, showcasing the materials inertness process’s robustness to changing ammonia concentrations. Notably, the study revealed that the highest nitrogen (N) recovery, associated with 86% and 88% ammonia removal in the CS and FS, was achieved at pH 11, underscoring the efficiency of nutrient recovery. The RS achieved the highest nitrogen recovery efficiency at pH 10, at 86.3%. In addition, the research highlighted the positive impact of reducing heavy metal levels (Zn, Cu, Pb, Ni, Cd, Cr and Fe) and improving the composition of the microbial community in the digestate. These findings offer valuable insights into sustainable manure and nutrient management practices, emphasizing the potential benefits for the agricultural sector and the broader circular economy. Future research directions include economic viability assessments, regulatory compliance evaluations, and knowledge dissemination to promote the widespread adoption of these clean technologies on a larger scale. The study marks a significant step toward addressing the environmental concerns associated with poultry farming and underscores the potential of integrating clean technologies for a more sustainable agricultural future.

Farm leftovers, particularly crop residues, are a key source of renewable energy in Canada. The nation’s robust agricultural industry provides ample biomass, derived from forestry and agriculture resources, for energy generation. Crop residues, such as straws and husks, play a crucial role in this biomass reservoir, contributing to biofuel production and greenhouse gas mitigation efforts. Focusing on supply chains, waste management, and emission reduction, this study evaluates the sustainability of wheat straw, an agricultural biomass by-product. The environmental issues of various approaches to managing agricultural biomass were explored. Following an evaluation of biomass features, conversion methods, and economic and environmental advantages, the results show anaerobic digestion to be the most sustainable approach. Four metrics were examined in relation to social elements, and numerous aspects were considered as inputs in the evaluation of transportation costs. The use of electric trucks versus fuel-based trucks resulted in an 18% reduction in total operating costs and a 58% reduction in consumption costs. This study examined CO₂ emissions over four different transportation distances. The data indicate that a significant reduction of 36% in kg CO₂ equivalent emissions occurred when the distance was lowered from 100 km to 25 km. These findings offer insights for creating practical plans that should increase the sustainability of agricultural biomass leftovers.

This study endeavors to develop an economical and user-friendly biological sulfide oxidation system and explore its mechanism for generating biological elemental sulfur under micro-aerobic conditions using psychrophilic anaerobically digested media (liquid/solid inoculums obtained from agricultural livestock wastes) for sulfide-free biogas production. With an initial hydrogen sulfide concentration of 5000 ppm, a biogas flow rate ranging from 0.9 to 1.8 L/h-L_inoculum-mix, and an air injection rate of 0.6–1% (oxygen concentration in biogas), a remarkable biodesulfurization efficiency of 99–100% was attained using solid inoculum as the biodesulfurization medium. This efficiency was achieved without compromising the methane quality in the treated biogas. Compared to liquid inoculum, solid inoculum requires less than half the volume and no mixing equipment, such as bubble column reactors. The biodesulfurization reactor requires only 1 m³, which is approximately 1.5% of the volume of a wet anaerobic digester and 3% of a dry anaerobic digester, while processing cow manure (Total Solids: 20%) at 1.03 m³ of manure per day. Moreover, it can be operated at (19–20 °C), leading to substantial reductions in cost and footprint.