Invisibility has attracted intensive research in various communities, e.g., optics, electromagnetics, acoustics, thermodynamics, dc, etc. However, many experimental demonstrations have only been achieved by virtue of simplified approaches due to the inhomogeneous and extreme parameters imposed by the transformation-optic method, and usually require a challenging realization with metamaterials. In this Letter, we demonstrate a bilayer thermal cloak made of bulk isotropic materials, and it has been validated as an exact cloak. We experimentally verified its ability to maintain the heat front and its heat protection capabilities in a 2D proof-of-concept experiment. The robustness of this scheme is validated in both 2D (including oblique heat front incidence) and 3D configurations. The proposed scheme may open a new avenue to control the diffusive heat flow in ways inconceivable with phonons, and also inspire new alternatives to the functionalities promised by transformation optics.

Invisible cloak has long captivated the popular conjecture and attracted intensive research in various communities of wave dynamics, e.g., optics, electromagnetics, acoustics, etc. However, their inhomogeneous and extreme parameters imposed by transformation-optic method will usually require challenging realization with metamaterials, resulting in narrow bandwidth, loss, polarization-dependence, etc. In this paper, we demonstrate that thermodynamic cloak can be achieved with homogeneous and finite conductivity only employing naturally available materials. It is demonstrated that the thermal localization inside the coating layer can be tuned and controlled robustly by anisotropy, which enables an incomplete cloak to function perfectly. Practical realization of such homogeneous thermal cloak has been suggested by using two naturally occurring conductive materials, which provides an unprecedentedly plausible way to flexibly realize thermal cloak and manipulate heat flow with phonons.

By using sub-wavelength resonators, metamaterial absorber shows great potential in many scientific and technical applications due to its perfect absorption characteristics. For most practical applications, the absorption bandwidth is one of the most important performance metrics. In this paper, we demonstrate the design of an ultra-broadband infrared absorber based on metasurface. Compared with the prior work [Opt. Express 22(S7), A1713-A1724 (2014)], the proposed absorber shows more than twice the absorption bandwidth. The simulated total absorption exceeds 90% from 7.8 to 12.1 um and the full width at half maximum is 50% (from 7.5 to 12.5 μm), which is achieved by using a single layer of metasurface. Further study demonstrates that the absorption bandwidth can be greatly expanded by using two layers of metasurface, i.e. dual-layered absorber. The total absorption of the dual-layered absorber exceeds 80% from 5.2 to 13.7 um and the full width at half maximum is 95% (from 5.1 to 14.1 μm), much greater than those previously reported for infrared spectrum. The absorption decreases with fluctuations as the incident angle increases but remains quasi-constant up to relatively large angles.

We report the design, fabrication, and measurement of an ultra-broadband wide-angle reflective cross-polarization convertor using the compact H-shaped metasurface. The significant bandwidth expansion is attributed to the four electromagnetic resonances generated in an H-shaped unit. The simulation results show that the polarization conversion ratio (PCR) of the proposed metasurface is above 90% in the frequency range from 7 to 19.5 GHz and the relative bandwidth reaches 94%. The proposed metasurface is valid for a wide range of incident angles, and the mean polarization conversion ratio remains 80% even though the incident angle reaches 41.5°. The experimental results are in good agreement with the simulation results. Compared with the previous designs, the proposed linear polarization converter has a simple geometry but an excellent performance and hence has potential applications in microwave communications, remote sensors, and imaging systems.

Through the manipulation of co-polarized reflection and cross-polarized reflection from a periodic array of metal-dielectric-metal resonators, a plethora of unprecedented metamaterial devices have been successfully demonstrated, such as perfect absorber and polarization converter. Recently, some broadband absorbers based on anisotropic resonators have been reported, which are actually poor absorbers when the cross-polarized reflection is considered. Here, we demonstrate that an ultra-wideband and high-efficiency reflective cross-polarization convertor can be achieved by breaking the symmetry of the resonator unit of a perfect absorber. Simulation results show that the polarization conversion ratio of the proposed metasurface is above 90% in the frequency range from 6.67 to 17.1 GHz and the relative bandwidth reaches 87.7%. The experimental results are in good agreement with the simulation results. The method paves a new way for the design of broadband polarization convertor, which can also be extended to the terahertz band.