Out-of-plane deformation patterns, such as buckling, wrinkling, scrolling, and folding, formed by multilayer van der Waals materials have recently seen a surge of interest. One crucial parameter governing these deformations is bending rigidity, on which significant controversy still exists despite extensive research for more than a decade. Here, we report direct measurements of bending rigidity of multilayer graphene, molybdenum disulfide (), and hexagonal boron nitride (hBN) based on pressurized bubbles. By controlling the sample thickness and bubbling deflection, we observe platelike responses of the multilayers and extract both their Young’s modulus and bending rigidity following a nonlinear plate theory. The measured Young’s moduli show good agreement with those reported in the literature (), but the bending rigidity follows an opposite trend, for multilayers with comparable thickness, in contrast to the classical plate theory, which is attributed to the interlayer shear effect in the van der Waals materials.
1 August 2020 in Composites Part A: Applied Science and Manufacturing
The development of electromagnetic interference (EMI) shielding materials is moving forward towards being lightweight and showing high-performance. Here, we report on lightweight silver nanowire (AgNW)/MXene hybrid sponges featuring hierarchical structures that are fabricated by a combination of dip-coating and unidirectional freeze-drying methods. The commercial melamine formaldehyde sponges (MF), designed with a buckled structure, are chosen as the template for coating with the AgNW layer (BMF/AgNW). Furthermore, the additional irregular honeycomb architecture composed of MXene assembled cell walls is introduced inside the BMF cell–matrix through unidirectional freeze-drying of MXene aqueous suspensions. Consequently, the BMF/AgNW presents a better EMI shielding effectiveness of 40.0 dB contributed by the conductive network and multiple reflections and scattering compared with the MF/AgNW. Eventually, the resulting AgNW/MXene hybrid sponge exhibits a higher EMI shielding effectiveness of 52.6 dB with a low density of 49.5 mg cm−3 compared with the BMF/AgNW due to synergetic effects of the AgNW and MXene both in conductivity and hierarchical structure. These results also provide a novel way to fabricate lightweight and conductive sponges as high-performance EMI shielding materials.
1 February 2020 in Composites Part A: Applied Science and Manufacturing
Shape memory polymers (SMPs) that change shapes as designed by external stimuli have become one of the most promising materials as actuators, sensors, and deployable devices. However, their practical applications have been greatly limited due to the long recovery time, which mainly originates from their low recovery stress, inherent viscoelastic hysteresis effect and low heat transmission efficiency. In this work, a novel method is proposed to prepare fast responsive reduced graphene oxide/shape memory polyurethane/polyurethane foam (rGO/SMPU/PU foam) shape memory composites. The elastic PU foam is used as framework to be coated with SMPU and rGO by solution polymerization and self-assembly methods, which result in rGO/SMPU/PU foam with three-dimensional networks. The rGO/SMPU/PU foam exhibits a fast response (of less than 1 s) under a large compressing deformation (80%) due to the synergistic effect of the high elasticity of PU foam, the short energy transmission distance of the SMPU layer and the high thermal conductivity of the rGO layer. Moreover, owing to the outstanding shape fixity ratio (Rf) and shape recovery ratio (Rr) of SMPU and the mechanical properties of PU foam, the rGO/SMPU/PU foam shows an excellent shape memory effect (more than 98% Rf and Rr at 80% strain) and cyclic stability simultaneously. Such rGO/SMPU/PU foam material demonstrates the potential applications in high-sensitivity temperature sensors and temperature codes.
In this study, we report the polymer-based graphene foams through combination of bottom-up assembly and simple triaxially buckled structure design. The resulting polymer-based graphene foams not only effectively transfer the functional properties of graphene, but also exhibit novel negative Poisson’s ratio (NPR) behaviors due to the presence of buckled structure. Our results show that after the introduction of buckled structure, improvement in stretchability, toughness, flexibility, energy absorbing ability, hydrophobicity, conductivity, piezoresistive sensitivity and crack resistance could be achieved simultaneously. The combination of mechanical properties, multifunctional performance and unusual deformation behavior would lead to the use of our polymer-based graphene foams for a variety of novel applications in future such as stretchable capacitors or conductors, sensors and oil/water separators and so on.