Keeping in view the weightage of electric propulsion over chemical propulsion, materials from metals to polymers and liquid (water) have been tested as propellants in ablative laser propulsion. This emerging propulsion technique can be widely used for aerospace applications like debris removal in the range of cm, pointing micro and nano satellites, laser micro thrusters for spacecraft attitude, and orbit control. Laser propulsion can become a less expensive alternative to chemical propulsion. In this review, we compile the work done in ablative laser propulsion and different modes of propulsion along with the efficiency of different propellants. We summarize the optimized propulsive parameters with solid propellants and liquid propellants along with the efficiencies and theories of laser thrusters with optimized specific impulses. The article provides precise developments done in the field of ablative laser propulsion and deep insights into the analysis done between the different propellants used recently in ablative laser propulsion.
A laser can be used to propel distant objects. The ability of silicon to produce thrust and its propulsive parameters are needed to be studied in ablative laser propulsion (ALP). In this work, pure silicon and silicon doped with indium were subjected to ALP to achieve the momentum coupling coefficient and specific impulse to investigate its worth as a propellant. The experiment was conducted using the Nd:YAG laser (Quantel Brilliant) operating at fundamental harmonic (λ = 1064 nm and 5 ns pulse duration). In the given range of fluence, 1 × 105–5 × 105 J/m2, no significant difference among both samples for values of momentum coupling coefficient (Cm) and specific impulse (Isp) is observed; for instance, both propellants follow a decreasing trend for Cm. However, maximum enhancement for Cm and Isp is observed with a cavity aspect ratio of one. Cm and Isp are enhanced about 1.75 and 4.5 times, respectively, for pure silicon. The external cavity does not have any impact on Cm values for indium-doped silicon while values of Isp showed considerable enhancement.
Remote-sensing applications within atmospheric scattering environments pose substantial challenges for traditional optical imaging systems owing to photon scattering, signal attenuation, and noise-induced degradation. This paper presents a ghost imaging technique operating in the Fourier domain, integrated with adaptive multistage post-processing enhancement algorithms to improve image reconstruction fidelity in the presence of scattering media. The experimental framework utilizes a digital micromirror device (DMD) to generate structured Fourier basis patterns in the reference arm, while the signal arm traverses controllable scattering media simulated using a precision-positioned ground glass (GG) diffuser. Image reconstruction is achieved through frequency-domain correlation processing employing a three-step phase-shifting algorithm, while reconstructed image degradation is mitigated through a multi-stage enhancement pipeline incorporating adaptive denoising, deblurring, and contrast optimization algorithms. Experimental validation demonstrates that the proposed methodology achieves recognizable image reconstruction using 25% of the Fourier coefficient set under high-scattering conditions, with enhancement algorithms providing up to 30% improvement in peak signal-to-noise ratio (PSNR) relative to unprocessed reconstructions. This investigation reveals fundamental limitations in dense scattering regimes and provides insights into the computational trade-offs inherent in ghost imaging systems under challenging environmental conditions.
Polycystic ovary syndrome (PCOS) is a significant hormonal disease that affects females. PCOS leads to complications such as infertility and metabolic issues. Investigation of PCOS is essential to reduce complications and death rate. This research facilitates the rapid detection of PCOS for effective treatment and prevention. Laser-induced breakdown spectroscopy (LIBS) was employed as a less invasive and sample-preparation-free technique for the investigation of PCOS. The elemental composition of thebsample was analyzed by atomic emission spectra. In our research, the elements such as sodium (Na), nitrogen (N), calcium (Ca), and CN- band were identified in PCOS. Machine learning models, including decision tree, neural networks, support vector machine, random forest, naive Bayes, and logistic regression classifiers, were applied to LIBS spectral data for the classification and discrimination between healthy and PCOS samples. Different models have varying training accuracy ranged from 52.9% to 82.1%, and prediction accuracy ranged from 55.0% to 93.3%. The narrow neural network attained the highest prediction accuracy of 93.3%, and the bilayer neural network attained 82.1% of training accuracy. This preliminary research of LIBS assisted with machine learning provides an alternative method to existing analytical techniques for the investigation of PCOS.
We propose a cross-attention mechanism combined with ghost imaging (GI) for target recognition directly from bucket measurements, eliminating the need for object imaging at extremely low sampling ratios (SR). The sparsity of measurements at ultra-low SR poses a challenge for the traditional recognition methods. Inspired by the cross-attention mechanism’s ability to highlight relevant features within data, our approach focuses on the most relevant input features within bucket measurements while disregarding noisy and irrelevant information. Our cross-attention DL model trained on GI measurements at 0.2 and 0.1 SRs achieves high recognition accuracy of 99% and 96% respectively. The cross-attention model remains robust against data augmentation and capable of classifying multi-class targets without any need for imaging, and hence eliminates the reconstruction time at ultra-low SRs maintained at 0.1 and 0.2. Experimental and simulated results validate the efficacy of our model, demonstrating the importance of image-free target recognition in autonomous vehicles, remote sensing, medical diagnostics, defense, and industrial inspection, where efficient recognition with sparse data is critical.