Nadezhda Yakushova

Dr. Nadezhda Yakushova

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
IPIgor Pronin
Igor Pronin
IAIgor A. Averin
Igor A. Averin
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
NYNadezhda Yakushova
Nadezhda Yakushova
AKAlexei Komolov
Alexei Komolov
GKGhenadii Korotcenkov
Ghenadii Korotcenkov
The surface properties of zinc oxide powders prepared using mechanical activation, electron beam irradiation, and vacuum annealing, as well using combinations of these types of treatments, were studied using X-ray photoelectron spectroscopy. The structure of the obtained materials was studied by an X-ray diffraction technique and by scanning electron microscopy. We found that over five hours of grinding in an attritor, the size of nanocrystals decreases from 37 to 21 nm, and microdeformations increase from 0.3% to 0.6%. It was also found that a five-hour grinding treatment promoted formation of vacancies in the zinc sublattice at the surface and diffusion of Zn2+ cations into the bulk of the material. Irradiation of commercial zinc oxide powders with an electron beam with an energy of 0.9 MeV and a dose of 1 MGy induced breaking of Zn–O bonds, diffusion of interstitial zinc ions into the bulk, and oxygen atom escape from regular positions into the gas phase. A combined treatment of five hours of grinding and electron beam irradiation promoted accumulation of interstitial zinc ions at the surface of the material. Annealing of both initial and mechanically activated ZnO powders at temperatures up to 400 °C did not lead to a significant change in the properties of the samples. Upon exceeding the 400 °C annealing temperature the X-ray photoelectron spectra show almost identical atomic composition of the two types of materials, which is related to diffusion of interstitial zinc ions from the bulk of the material to the surface.

27 November 2018 in Coatings
Verified
Journal Article
Open access
PDF file
IPIgor Pronin
Igor Pronin
NYNadezhda Yakushova
Nadezhda Yakushova
IAIgor Averin
Igor Averin
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
VMVyacheslav Alexeyevich Moshnikov
Vyacheslav Alexeyevich Moshnikov
DDDimitre Dimitrov
Dimitre Dimitrov
A model of the thermovoltaic effect emergence in ZnO/ZnO (Me = Cu, Fe), sandwich structures has been developed in the article. The samples were made by the sol-gel method. When they were uniformly heated in a laboratory furnace in the temperature range of 200–300 °C, there an electromotive force (EMF) of −7~10 mV, not associated with the Seebeck effect, emerged. The developed physical mechanisms of the effect emergence consist of the following well-known fact: iron and copper coexist in zinc oxide in two states, namely, Fe2+ and Fe3+ (donor), and Cu2+ and Cu+ (acceptor). During the heating of the ZnO/ZnO–Me system, the concentration of charge carriers in the layers will increase, while in the upper layer its value will be larger because of the presence of electrically active impurities. At room temperatures, Coulomb forces retain an electron that is located on the Fe2+ ion, as well as a hole on Cu2+ ion, and the main states undergo ionization. However, as the temperature increases, the carrier concentration can reach a critical level, when they can screen the ion charge (the Debye screening radius decreases to the Bohr radius of the impurity). In this case, an abrupt collective endothermic process of ionization of multivalent impurities takes place, accompanied by the appearance of a concentration gradient of free carriers in the sample, and accordingly, the emergence of an electromotive force. Quantitative calculations of the critical temperature, at which the onset of EMF generation is observed, performed within the framework of the developed models.

16 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
IPIgor Pronin
Igor Pronin
ASAlexander P. Sigaev
Alexander P. Sigaev
AKAlexei Komolov
Alexei Komolov
EZEvgeniy Zhizhin
Evgeniy Zhizhin
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
GKGhenadii Korotcenkov
Ghenadii Korotcenkov
In this work, we study the effects of treating nanostructured SnO2–SiO2 films derived by a sol-gel method with nitrogen and oxygen plasma. The structural and chemical properties of the films are closely investigated. To quantify surface site activity in the films following treatment, we employed a photocatalytic UV degradation test with brilliant green. Using X-ray photoelectron spectroscopy, it was found that treatment with oxygen plasma led to a high deviation in the stoichiometry of the SnO2 surface and even the appearance of a tin monoxide phase. These samples also exhibited a maximum photocatalytic activity. In contrast, treatment with nitrogen plasma did not lead to any noticeable changes in the material. However, increasing the power of the plasma source from 250 W to 500 W led to the appearance of an SnO fraction on the surface and a reduction in the photocatalytic activity. In general, all the types of plasma treatment tested led to amorphization in the SnO2–SiO2 samples.

1 July 2025 in Technologies
Verified
Journal Article
Open access
PDF file
NYNadezhda Yakushova
Nadezhda Yakushova
IGIvan A. Gubich
Ivan A. Gubich
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
AKAlexei Komolov
Alexei Komolov
AKAleksandra V. Koroleva
Aleksandra V. Koroleva
IPIgor Pronin
Igor Pronin
The article suggests a simple one-step sol–gel method for synthesizing nanostructured zinc oxide films co-doped with copper and aluminum. It shows the possibility of forming hierarchical ZnO:Al:Cu nanostructures combining branches of different sizes and ranks and quasi-spherical fractal aggregates. It demonstrates the use of the synthesized samples as highly efficient photocatalysts providing the decomposition of toxic dyes (methyl orange) under the action of both ultraviolet radiation and visible light. It establishes the contribution of the average crystallite size, the proportion of zinc atoms in the crystalline phase, their nanostructure, as well as X-ray amorphous phases of copper and aluminum to the efficiency of the photocatalysis process.

1 August 2025 in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
Verified
Journal Article
Closed access
PDF file
NYNadezhda Yakushova
Nadezhda Yakushova
IGI. A. Gubich
I. A. Gubich
IPI. A. Pronin
I. A. Pronin
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
VMV. A. Moshnikov
V. A. Moshnikov
A simple one-stage sol–gel technique for the synthesis of nanostructured ZnO films modified with Al has been developed. A comparative study of the effect of zinc oxide modification with aluminum, as well as the simultaneous action of methyl orange and ultraviolet radiation on their optical band gap, has been carried out. The contribution of each factor to the transformation of the band structure of the samples has been estimated. It has been shown that for all considered aluminum concentrations, the role of dye adsorption is predominant. A nonmonotonic dependence of the optical band gap of the material on the modifier content has been demonstrated, as well as its significant decrease upon dye adsorption and exposure to ultraviolet radiation. It has been suggested that the growth of the considered value in ZnO with an increase in the Al concentration to 2 at % is associated with the manifestation of the Burstein–Moss effect due to the filling of the lower levels of the conduction band with electrons. The results of the study of the samples by spectroscopy in the visible and ultraviolet wavelength ranges are supplemented by experimental data obtained using scanning electron microscopy. It was found that at all considered aluminum concentrations, the ZnO films are characterized by a nanostructured surface formed by intertwined “branches” of different sizes. A model is proposed that describes the fixation of methyl orange on the surface of the studied samples.

24 October 2019 in Coatings
Verified
Journal Article
Open access
PDF file
IPIgor Pronin
Igor Pronin
NYNadezhda Yakushova
Nadezhda Yakushova
IAIgor Averin
Igor Averin
Andrey A. KarmanovAndrey A. Karmanov
Andrey A. Karmanov
VMVyacheslav Alexeyevich Moshnikov
Vyacheslav Alexeyevich Moshnikov
DDDimitre Dimitrov
Dimitre Dimitrov
Systematic research on a new type of gas sensor devices based on the thermovoltaic effect in zinc oxide, inhomogeneously doped with impurities of variable valence, is presented in the article. The ZnO–ZnO–Me two-layer sandwich structure, in which the thermovoltaic effect is observed, is synthesized using sol–gel technology from sols by dissolving the inorganic zinc salt in alcohol and adding a surfactant, followed by the mixing and maturation of the sol. The lower layer of the nanostructure is formed from pure zinc oxide by immersing the substrate at ⅔ length in sol and drying. The upper layer of zinc oxide doped with copper or iron is formed by two or three immersions of the other end of the substrate by ⅔ length, followed by drying and annealing. It has been established that, based on the developed sensor device, it is possible to obtain an increased response to gas-analyzers (ethanol being an example).