The anchorage of fiber-reinforced polymer (FRP) composites when applied to reinforced concrete (RC) structures as externally bonded reinforcement is an effective means to achieve higher levels of fiber utilization prior to premature debonding failure. Commonly documented anchorage methods for FRP-to-concrete applications demonstrating encouraging results include FRP U-jackets, FRP anchors (also known as spike anchors, among other names), patch anchors (utilizing unidirectional and bidirectional fabrics), nailed metal plates (also known as hybrid bonding), near-surface mounted rods, mechanical fastening, concrete embedment, and mechanical substrate strengthening. Anchorages applied to FRP systems have been verified through experimental testing and numerical modeling to increase the ductility, deformability, and strength of the member and also prevent, delay, or shift the critical mode of FRP debonding failure. Although the benefits of anchorage solutions have now been widely acknowledged by researc...
This paper summarizes the environmentally assisted degradation of the bond between steel and carbon fiber–reinforced polymer (CFRP) composites through analysis of the mechanical performance of loaded and unloaded steel/CFRP double strap joints exposed to various harsh environments such as elevated temperatures, seawater, cyclic temperature and humidity, and ultraviolet (UV) radiation. It was found that both joint stiffness and strength significantly decreased by up to 80% when tested at elevated temperatures near to or greater than Tg of the adhesive used. The mechanical properties reduced by about 20% when exposed to seawater for up to 1 year. Although no significant reduction in stiffness and strength were found when the unloaded joints were exposed to cyclic temperature between 20 and 50°C with the added presence of humidity, the loaded joints catastrophically failed during the exposure, showing that the combination of load, temperature, and moisture was the most critical scenario. In addition,...