Faced with a problem such as desertification that affects certain areas of several countries. In Africa, reforestation is being carried out as an alternative solution through semicircular sections, managing to retain rainwater and improving the soil in arid areas. Since the behavior of water in these sections and how it is retained within them is not known, this research has proposed carrying out simulations with a non-experimental approach, with the objective of evaluating the speeds and pressures of the water through 6 two-dimensional simulations in Autodesk CFD software.
Water resources are affected by rainstorms, causing increases in flows and velocities, which in turn generate erosion and overflows in their causes. For the aforementioned reasons, it is urgent to design structures to reduce the velocities and dissipate the energy produced by the increase in flows, unfortunately the study of the kinematics of fluids is complex, since being able to study the behavior of these obeys the solution of very complex differential equations such as those of Navier-Stokes and Saint Venant. Currently, technological progress allows the partial resolution of the aforementioned equations, which prompted the realization of this research in which a model of two-dimensional barriers was designed using Autodesk Inventor software and simulated in Autodesk CFD, using water as a fluid, which was subjected to 5 different speeds and pressures in order to analyze whether or not the heatsink module created achieved the efficient dissipation of energy between its inlet and outlet sections, thus laying the groundwork for future research on sediment settling, hydraulic structures or scours.
Local scour in piers is one of the main causes of failure in bridges. The current procedures carried out to study this phenomenon, such as the implementation of physical models and formulas, show precision difficulties; therefore, it is a matter of great interest for engineers and bridge design. In this work, a numerical modeling and a graphical analysis were performed using the Ansys Fluent software, to analyze the interaction of a flow through a pier. The geometry of the channel and the pier were extracted from a published article, in which an experimental study was carried out consisting on the analysis of the effect of placing a ring around a circular pier as a device to control the depth of scour; Therefore, the scenario in which the flow hits the pier with a ring was modeled and the scenario in which the pier did not have the ring included was also modeled. From the modeling, it was possible to conclude that the use of a ring around a pier reduces the effect of local erosion and it was possible to contrast the results of the experimental physical model, coinciding that the scour depths of their study with the contour and vectors graph obtained from numerical modeling, thus successfully concluding an alternative that would support studies carried out with physical and conceptual models, which is the use of a numerical model and software that allows this type of modeling.
The main objective of the research project is to analyze energy dissipation in streams to evaluate energy control, using the Autodesk CFD tool. The aim is to understand how energy dissipation can contribute to reducing the flow velocity of the water. Simulations will be conducted using Autodesk CFD, considering variables such as stream geometry, water flows, and the shape of the dissipators. The results of the simulations will allow for a better understanding of how the dissipators interact with the stream current. The theoretical framework will be based on academic sources that address key concepts of energy dissipation, flows, pressure, among others.
Climate change has intensified torrential flows and floods in Peru, increasing the vulnerability of affected regions and causing serious damage to infrastructure and communities near rivers. This work evaluates a teardrop-shaped hydraulic dissipator through experiments in a laminar flow table and simulations in Autodesk CFD, analyzing its performance under laminar and turbulent flow conditions. The results show that the dissipator effectively reduces flow energy, with velocities ranging from 14.60 cm/s in laminar flow and 19.38 cm/s in turbulent flow at its most critical points down to 0.01 cm/s. This analysis demonstrates how the geometry and orientation of the dissipator directly influence its effectiveness, highlighting the potential of dissipators to protect infrastructure against erosive forces in river channels.