A broadband and high-gain substrate integrated waveguide (SIW)-fed slot antenna array is demonstrated at Q- band. Aperture coupling is used for interconnecting the two adjacent substrate layers. It is proposed to improve the impedance matching and gain of the antenna element simultaneously by stacking a metallic cross-shaped radiating slot atop of a crossshaped coupling slot. For proof of concept, a 4×4 antenna array with a low-loss SIW feeding network is further designed and measured. The measured impedance bandwidth of the proposed 4×4 antenna array is 20.5% from 42.4 to 52.1 GHz for |S11| ≤ -10 dB. The measured peak gain is 19.4 dBi at 50 GHz. The measured and simulated results are in good agreement.
14 April 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, a millimeter-wave (mm-wave) nondiffracting Airy orbital angular momentum (OAM) beam is experimentally demonstrated by using a single-layer hexagonal lattice reflectarray based on an Airy-OAM-phase modulation method. To reduce the design time, a near-field synthesis technique is used to theoretically analyze the nondiffracting characteristics of the Airy OAM beam. A hexagonal dual-resonance element, composed of a hexagon ring around a square patch, is employed in the reflectarray to provide a linear phase range of 360 ° . The proposed reflectarray with a diameter of 45 cm is designed at 47 GHz, which can reshape the incident wave according to the superposition phase of the desired Airy beam and OAM beam. To validate our design, a prototype is fabricated and measured. The measured results agree well with the theoretical and simulated ones. The experimental results show that an Airy OAM beam with the mode of $+$1 is successfully generated from 44 to 49 GHz. The nondiffracting propagation distance is greater than 2.5 m (392λ 0 ). Moreover, the measured results validate the autofocusing and self-healing properties of the Airy OAM beam.
In this paper, the harmonic multiple loop detection (HMLD) algorithm for heart rate (HR) and respiration rate (RR) estimation with impulse radio ultrawideband (IR-UWB) radar is introduced. The algorithm includes two parts: one is the harmonic multiple discriminant principle and the other is the cyclic spectrum updating process. The harmonic multiple discriminant principle is used to detect whether the peak point in the fundamental frequency band is the true vital sign signal. The cyclic spectrum updating process can remove the error peak point according to the results obtained from the part one. In this algorithm, threshold setting is not needed and the estimation error caused by the erroneous threshold can be reduced. Only the fundamental and second harmonic frequencies are needed for HR and RR estimation, so the algorithm has strong environmental robustness and low requirement of radar hardwares. Compared with other algorithms, HMLD algorithm provides reasonable average error rates (4.95% and 5.06%) compared to real data from the oximeter in RR and HR detection. The real-time vital signs detection experiment shows that HMLD algorithm can not only detect the vital signs rate and record the historical curve in real time, but also detect the location information, which proves the validity of HMLD algorithm in real-time vital signs detection.
In this paper, an octagonal shorted annular ring (OSAR) antenna array is presented based on 130-nm SiGe BiCMOS technology without any post-processes. The OSAR antenna consists of annular ring patch, an array of shorted pins and ground which is formed a cavity to enhance the gain and reduce surface waves. The 1×2 OSAR antenna array is designed and fabricated with the die area of 550× 1100μm2. The measured – 10-dB impedance bandwidth is more than 17 GHz (303-320 GHz). The proposed on-chip antenna array is achieved a measurement perk gain of 4.1 dBi at 320 GHz and the simulated radiation efficiency of 38 %.
14 September 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, an 8 × 8 dual-polarized antenna array with high gain and broad bandwidth is proposed for $Q$ -band millimeter-wave (mm-wave) application. Metallic pillars and cavities act as magnetoelectric dipoles fed by a 1 to 4 backed cavity with cross-shaped slots. The cross-shaped slots are adopted to excite two orthogonal linear polarizations. A feeding network with shared vias is designed to construct the antenna array. An 8 × 8 dual-polarized antenna is fabricated and measured. The measured impedance bandwidths are 13.4% from 34.7 to 39.7 GHz and 14.4% from 34.6 to 40.1 GHz for the two ports, respectively. The 3 dB gain fluctuation bandwidth is 8% for the two ports. The maximum gain is up to 24.8 dBi due to less substrate loss in the radiation structure. Attributed to its high gain and high efficiency, the proposed antenna is a promising candidate for mm-wave applications.
25 April 2022 in IEEE Transactions on Antennas and Propagation
In this communication, a high-order-mode (HOM)-fed open-ended rectangular waveguide antenna with high gain and broadband is proposed for fifth-generation (5G) applications. A miniaturized HOM cavity with four slots introduces hybrid modes of $TE_{340}$ and $TE_{140}$ , which act as a low loss feeding network. Furthermore, an open-ended waveguide is loaded above the HOM cavity to widen the impedance bandwidth. Compared with $TE_{340}$ HOM, hybrid modes of $TE_{340}$ and $TE_{140}$ HOM provide more compact size and higher gain. For the proof of concept, a $4\times $ 4 antenna array is designed and fabricated. The measured impedance bandwidth is 28.1% from 32.85 to 43.6 GHz. The measured peak gain is 21.7 dBi. Great compatibility between simulated and measured results is achieved.