Catherine P Barry

Dr. Catherine P Barry

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024 in Journal of Engineered Fibers and Fabrics
Verified
Journal Article
Open access
CBCatherine P Barry
Catherine P Barry
BOBradford G Olson
Bradford G Olson
DWDavid J Willis
David J Willis
KBKeith Bergeron
Keith Bergeron
CCChristine Charrette
Christine Charrette
JSJames A Sherwood
James A Sherwood
GPS-guided parachutes are used by the military to deliver supplies to personnel in the field. During descent, the suspension lines can vibrate as a result of vortex shedding and oscillating aerodynamic forces. In addition to challenging the targeting accuracy, these vibrations can generate sound that can compromise silent entry operations. The availability of a fundamental understanding of the relationship between braid architecture and associated vibrations would provide insight on how changes in the design of suspension lines could mitigate these vibrations. In the current research, the torsional and transverse stiffnesses of a braided parachute suspension line are characterized as a function of the state of tension. The torsional behavior is investigated using static and dynamic torsion tests, and the transverse behavior is studied using a pluck test. The torsional and transverse stiffnesses are found to increase with increasing tension on the suspension line. The effective transverse stiffness is found to correlate to that which can be derived from the vibrating string under tension equation. These stiffness properties can be used as inputs for fluid-structure-interaction (FSI) models to develop a calibrated FSI simulation to investigate the role that the mechanical behavior of the suspension line plays in its flow-induced vibrational response.

26 March 2025 in Textiles
Verified
Journal Article
Open access
PDF file
CBCatherine P Barry
Catherine P Barry
KBKeith Bergeron
Keith Bergeron
SSScott Stapleton
Scott Stapleton
DWDavid Willis
David Willis
GNGregory Noetscher
Gregory Noetscher
James SherwoodJames Sherwood
James Sherwood
Parachute suspension lines shed vortices during descent, and these vortices develop oscillating aerodynamic forces that can induce forced parasitic vibrations of the lines, which can have an adverse impact on the parachute system. Understanding the line’s mechanical behavior can assist in studying the vibrations experienced by the suspension lines. A well-calibrated structural model of the suspension line could be used to help to identify how the braid’s architecture contributes to its mechanical behavior and to explore if and how a suspension line can be designed to mitigate these parasitic vibrations. In the current study, a mesomechanical finite element model of a polyester braided parachute suspension line was constructed. The line geometry was built in the Virtual Textile Morphology Suite (VTMS), and a user material model (UMAT) was implemented in LS-DYNA® release 14 to describe the material behavior of the individual tows. The material properties were initially calibrated using experimental tension tests on individual tows, which exhibited an initial modulus of ~4100 MPa before transitioning to ~3200 MPa at a stress of 30 MPa. When these properties were applied to the full braid model, slight adjustments were made to account for geometric complexities in the braid structure, improving the correlation between the model and experimental tensile tests. The final calibrated model captured the bilinear tensile behavior of the braid, with an initial modulus of 2219 MPa and a secondary modulus of 1350 MPa, compared to experimental values of 2253 MPa and 1420 MPa, respectively, showing 2% and 5% differences. The calibrated model of the braided cord was then subjected to torsion, and the results showed good agreement with dynamic and static experimental torsion tests, with a difference of 8–19% for dynamic tests and 13–27% for static tests when compared to experimental values. The availability of virtual models of suspension lines can ultimately assist in the design of suspension lines that mitigate flow-induced vibration.

1 May 2026 in Results in Engineering
Verified
Journal Article
Open access
CBCatherine P Barry
Catherine P Barry
DWDavid Willis
David Willis
KBKeith Bergeron
Keith Bergeron
GNGregory Noetscher
Gregory Noetscher
JSJames A. Sherwood
James A. Sherwood

27 February 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
CBCatherine P Barry
Catherine P Barry
KBKeith Bergeron
Keith Bergeron
SSScott Stapleton
Scott Stapleton
DWDavid Willis
David Willis
GNGregory Noetscher
Gregory Noetscher
James SherwoodJames Sherwood
James Sherwood
Parachute suspension lines shed vortices during descent, and these vortices develop oscillating aerodynamic forces that can induce forced parasitic vibrations of the lines that have an adverse impact on the parachute system. Understanding the line’s mechanical behavior can assist in comprehending the vibrations that are experienced by the suspension lines. A well calibrated structural model of the suspension line could be used to help identify how the braid’s architecture contributes to its mechanical behavior and to explore if and how a suspension line can be designed to mitigate these parasitic vibrations. In the current study, a mesomechanical finite element model of a polyester braided parachute suspension line was constructed. The line geometry was built in the Virtual Textile Morphology Suite (VTMS), and a user material model (UMAT) was implemented in LS-DYNA® release 14 to describe the material behavior of the individual tows. The results of the experimental tension tests that were performed on the individual tows of the braid served as a starting point to calibrate the material properties to achieve good correlation between the mesomechanical model and the experimental tension tests of the physical suspension line. The calibrated model of the braided cord was then twisted in torsion, and the model was found to show good correlation with dynamic and static experimental torsion test data. The availability of virtual models of suspension lines can ultimately assist in the design of suspension lines that mitigate flow-induced vibration.