Due to the development of new engineering materials and high-speed cutting, cutting fluid plays an important role in machining. Commonly, the use of cutting fluid can decrease cutting temperature, reduce the friction between tool and workpiece, extend tool life, and improve machining efficiency and surface quality. These effects of cutting fluid were mainly obtained from its basic functions including cooling, lubrication, corrosion protection, and cleaning. According to the review of the researches in cutting fluids applied in metal cutting process, the available researches mainly focused on the application strategies and penetration capability, processing performance, new types of environmentally friendly cutting fluids, and preliminary machined surface quality. This article also suggests that the effect of cutting fluid on machined surface quality and performance will become an important research direction. There is a matching problem between the cutting fluids and the workpiece materials. Further research on effect of cutting fluids on machined surface should include physical and chemical mechanism of the cutting fluid, action mechanism on fresh machined surface during machining process, action mechanism in the period of long-term service, stability of the composition and physical and chemical properties, and evaluation method of the effective use of cutting fluid.

In the process of high strength steel turning, tool wear will reduce the surface quality of the workpiece and increase cutting force and cutting temperature. To obtain the fine surface quality and avoid unnecessary loss, it is necessary to monitor the state of tool wear in the dry turning. In this article, the cutting force, vibration signal and surface texture of the machined surface were collected by tool condition monitoring system and signal processing techniques are being used for extracting the time-domain, frequency-domain and time-frequency features of cutting force and vibration. The gray level processing technique is used to extract the features of the gray co-occurrence matrix of the surface texture and found that these features changed simultaneously when the cutting tool broke. After this, an intelligent prediction model of tool wear was built using the support vector regression (SVR) whose kernel function parameters were optimized by the grid search algorithm (GS), the genetic algorithm (GA) and the particle swarm optimization algorithm respectively. The features extracted from the signals and surface texture are used to train the prediction model in MATLAB. It was found that after the surface texture features were fused using the intelligent prediction model on the basis of the features of cutting force and vibration, prediction accuracy of the proposed method is found as 97.32% and 96.72% respectively under the two prediction models of GA-SVR and GS-SVR. Moreover, the intelligent prediction model can not only predict the tool wear under different cutting conditions, but also the different wear stages in a single wear cycle and the absolute error between the predicted value and the actual value is less than 10 μm, the confidence coefficient of prediction curve is around 0.99.

Coronary artery disease (CAD) is the leading killer of humans worldwide. Bioresorbable polymeric stents have attracted a great deal of interest because they can treat CAD without producing long-term complications. Bioresorbable polymeric stents (BMSs) have undergone a sustainable revolution in terms of material processing, mechanical performance, biodegradability and manufacture techniques. Biodegradable polymers and copolymers have been widely studied as potential material candidates for bioresorbable stents. It is a great challenge to find a reasonable balance between the mechanical properties and degradation behavior of bioresorbable polymeric stents. Surface modification and drug-coating methods are generally used to improve biocompatibility and drug loading performance, which are decisive factors for the safety and efficacy of bioresorbable stents. Traditional stent manufacture techniques include etching, micro-electro discharge machining, electroforming, die-casting and laser cutting. The rapid development of 3D printing has brought continuous innovation and the wide application of biodegradable materials, which provides a novel technique for the additive manufacture of bioresorbable stents. This review aims to describe the problems regarding and the achievements of biodegradable stents from their birth to the present and discuss potential difficulties and challenges in the future.