Shale gas extraction is hindered by the complex geological conditions of shale reservoirs, such as deep burial, low permeability, and multi-zone characteristics. Therefore, horizontal well hydraulic fracturing is essential for improving reservoir permeability. However, fracture interference and fracturing fluid retention can lead to gas–water co-production. Existing models for predicting the productivity of fractured horizontal wells typically focus on single-phase flow or do not fully account for fracture interactions and dynamic water saturation changes. In contrast, this study introduces a novel fast prediction model for the steady-state productivity of fractured horizontal wells under a gas–water two-phase flow. The model extends single-phase fluid seepage theory by incorporating a gas–water two-phase pseudo-pressure function, while also accounting for fracture interference using potential theory and the superposition principle. Furthermore, it dynamically integrates formation pressure and water saturation variations, offering a more accurate prediction of productivity. The result demonstrates that fracture interference significantly affects the distribution of productivity, with end fractures producing up to 5.6 × 104 m3 while intermediate fractures maintain a relatively uniform production of around 0.9 × 104 m3. The sensitivity analysis reveals that productivity increases with an increase in formation pressure, fracture number, fracture half-length, and fracture angle, while an increcase in water saturation and skin factor reduce it. These results highlight the importance of optimizing fracture design and production strategies. This work provides a more comprehensive and efficient method for predicting and optimizing the gas–water two-phase productivity of fractured horizontal wells.
Hydraulic fracturing is a critical technology for developing shale gas reservoirs, which are typical natural nanoporous media. However, the complex two−phase flow induced by fracturing fluid retention and the strong interference among hydraulic fractures introduce significant uncertainties to productivity forecasting. To address these challenges, this study proposes a transient productivity forecasting method to characterize fluid transport in fractured nanoporous media. This method introduces a gas−water two−phase pseudo−pressure function to reconstruct the flow equations, utilizing micro−segment discretization and the principle of superposition to accurately characterize pressure drop interference among fractures, enabling rapid dynamic productivity forecasting under realistic well trajectory conditions. The investigation reveals that while increasing fracture count, half−length, and permeability enhances productivity, these improvements exhibit significant diminishing marginal returns, indicating the existence of optimal economic thresholds for these engineering parameters. Conversely, elevated water saturation, skin factor, and stress sensitivity lead to a decline in productivity. Analysis of flow interference demonstrates that fractures at the wellbore extremities contribute significantly higher production than those in the central section due to reduced interference, while deviations in the wellbore trajectory further exacerbate production heterogeneity. Field application confirms that the proposed method achieves reliable production history matching under realistic well trajectories and accurately captures the typical three−stage production characteristics of shale gas wells, providing a robust basis for Estimated Ultimate Recovery (EUR) assessment and fracturing design optimization.
The development of shale gas reservoirs relies on complex fracture networks created via multistage hydraulic fracturing, yet most existing models still use oversimplified fracture geometries and therefore cannot fully capture the coupled effects of multiscale fracture topology on flow and production. To address this gap, in this study, we combine fractal geometry with the Embedded Discrete Fracture Model (EDFM) to analyze the production dynamics of hydraulically fractured horizontal wells in shale gas reservoirs. A tree-like fractal fracture network is first generated using a stochastic fractal growth algorithm, where the iteration number, branching number, scale factor, and deviation angle control the self-similar hierarchical structure and spatial distribution of fractures. The resulting fracture network is then embedded into an EDFM-based, fully implicit finite-volume simulator with Non-Neighboring Connections (NNCs) to represent multiscale fracture–matrix flow. A synthetic shale gas reservoir model, constructed using representative geological and engineering parameters and calibrated against field production data, is used for all numerical experiments. The results show that increasing the initial water saturation from 0.20 to 0.35 leads to a 26.4% reduction in cumulative gas production due to enhanced water trapping. Optimizing hydraulic fracture spacing to 200 m increases cumulative production by 3.71% compared with a 100 m spacing, while longer fracture half-lengths significantly improve both early-time and stabilized gas rates. Increasing the fractal iteration number from 1 to 3 yields a 36.4% increase in cumulative production and markedly enlarges the pressure disturbance region. The proposed fractal–EDFM framework provides a synthetic yet field-calibrated tool for quantifying the impact of fracture complexity and design parameters on shale gas well productivity and for guiding fracture network optimization.