Matteo Polo

Dr. Matteo Polo

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2022 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
FPFelix Pino
Felix Pino
JDJessica Delgado
Jessica Delgado
GMGiorgia Mantovani
Giorgia Mantovani
Lucio PancheriLucio Pancheri
Lucio Pancheri
MBMichele Bello
Michele Bello
SMSandra Moretto
Sandra Moretto
In this work, we propose a prototype of a compact detector assembly capable of discriminating between neutrons and gamma rays, by performing pulse shape analysis. The device takes advantage of recent improvements in silicon photomultiplier (SiPM) technology and the excellent neutron/gamma-ray discrimination capabilities of new plastics and standard liquid scintillators. Our work is focused on the read-out of small-, medium-, and large-sized organic scintillators with large-area SiPM arrays ( $4 \times 4$ NUV and RGB-SiPM arrays, 17 mm $\times$ 17 mm). In particular, we used EJ-276 (and its old version EJ-299) and EJ-276G plastic scintillators of several sizes (ranging from 20- to 50-mm diameter) and two large liquid scintillator cells (EJ-301 and EJ-309, 50 mm diameter $\times 50$ mm thickness). Moreover, we show the comparison of neutron/gamma-ray discrimination performance between SiPM and standard photomultiplier read-out configurations. The presented innovative device could be used in different fields, first in fundamental nuclear physics experiments, as an ancillary neutron detector for the active target at the selective production of exotic species (SPES) facility at the Legnaro National Laboratories in Italy. Additionally, it could be used in radiation monitoring applications, as a fast neutron/gamma-ray counter to be embedded in unmanned vehicles for radiation monitoring.

31 May 2023 in The European Physical Journal Special Topics
Verified
Journal Article
Closed access
PDF file
MPMatteo Polo
Matteo Polo
FPFelix Pino
Felix Pino
JDJessica Carolina Alvarez Delgado
Jessica Carolina Alvarez Delgado
DFDaniela Fabris
Daniela Fabris
SMSandra Moretto
Sandra Moretto

2 November 2023 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PDF file
JDJessica C Delgado
Jessica C Delgado
CPCHIARA PROVENZANO
CHIARA PROVENZANO
MMMarcella Marra
Marcella Marra
MMMaurizio Martino
Maurizio Martino
AMAnna Grazia Monteduro
Anna Grazia Monteduro
ACAnna Paola Caricato
Anna Paola Caricato
Metal halide perovskite materials have received significant attention in recent years due to their promising properties and potential applications, particularly their use as scintillator detectors, which is rapidly emerging due to their promising advantages as detectors, such as low costs, fast response, high quantum yield, strong absorption, scalability, flexibility, and emission wavelength tunability. Given the effectiveness of perovskites as α particle detectors and the potential of 10B as a neutron converter, in this paper a 10B converting layer was coupled with an all-inorganic lead halide perovskite (CsPbBr3) layer aiming to create a thermal neutron detector. Specifically, a 1 µm thin film of 10B and a 1 µm thin layer of CsPbBr3 were deposited on a suitable substrate using a laser ablation process. The fabricated detector was subjected to a comprehensive characterization, including structural, morphological, and detection properties. As output, the films exhibit macroscopically uniform behavior and good adhesion to the substrate. In terms of thermal neutron efficiency, an efficiency of (7.9 ± 0.3)% was determined with respect to a commercial detector (EJ-426), which corresponds to an intrinsic efficiency of (2.5 ± 0.1)%. Also, Monte Carlo simulations were conducted, and the optimum value of the 10B layer thickness was found to be 2.5 µm.

1 November 2025 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Verified
Journal Article
Open access
JDJessica C. Delgado
Jessica C. Delgado
FPFelix Pino
Felix Pino
SMSandra Moretto
Sandra Moretto
MPMatteo Polo
Matteo Polo
DCDaniele Corti
Daniele Corti
DFDaniela Fabris
Daniela Fabris

1 February 2025 in Journal of Instrumentation
Verified
Journal Article
Open access
JYJixing Ye
Jixing Ye
MPMatteo Polo
Matteo Polo
RMRoberto Mendicino
Roberto Mendicino
AQAlberto Quaranta
Alberto Quaranta
Gian-Franco Dalla BettaGian-Franco Dalla Betta
Gian-Franco Dalla Betta
Within the INFN HYDE project, we have developed pixelated hybrid detectors for thermal neutron imaging. Devices are based on microstructured silicon sensors coupled with converter materials. Compared to standard 3D sensors, the proposed device offers a more convenient trade-off between technological complexity and neutron detection performance. Nevertheless, experimental results have shown a lower detection efficiency with respect to the theoretically expected value, which was attributed to an insufficient density of negative fixed charge in the Al2O3 layer used to passivate the cavities. TCAD simulations have been performed aimed at gaining deeper insight into this problem. The results reported in this paper confirm the sensitivity of the sensor performance to the properties of the Si/Al2O3 interface in terms of fixed charge and surface generation/recombination velocity, providing useful hints for future optimization of the device.

1 March 2026 in Journal of Instrumentation
Verified
Journal Article
Open access
FCF. Cittadini
F. Cittadini
KKKedia Kanxheri
Kedia Kanxheri
MPM. Ponzecchi
M. Ponzecchi
CTCinzia Talamonti
Cinzia Talamonti
MMMauro Mauro Menichelli
Mauro Mauro Menichelli
LSLeonello Servoli
Leonello Servoli
The INFN HASPIDE project investigates hydrogenated amorphous silicon (a-Si:H) as an innovative detector technology for dosimetry in FLASH radiotherapy. Conventional dosimeters, such as ionization chambers, show non-linear behavior when exposed to ultra-high dose-per-pulse beams used in FLASH radiotherapy, where several Grays are delivered in microsecond pulses. Thanks to its radiation hardness, mechanical flexibility and compatibility with large-area deposition, a-Si:H is a promising material for in-vivo and surface dosimetry. This work presents the response of a thin a-Si:H detector exposed to a high-dose-per-pulse 10 MeV electron beam, together with an analytical model used to describe the single-pulse dynamics and extract quantitative parameters. Measurements were performed at the University of Torino using a modified clinical LINAC operated in Ultra High Dose Rate regime, where the single-pulses satisfy the FLASH criteria. The a-Si:H detector, read out with a TetrAMM picoammeter (100 kHz sampling frequency), resolves individual radiation pulses with high repeatability. Both pulse charge and peak current scale linearly with the applied electric field up to 6 V (2.4 V/μm), beyond which the readout electronics saturates. The analytical model is validated through direct comparison with raw data, showing excellent agreement in extracted pulse parameters.