Cubic mesoporous silica SBA-1 functionalized with carboxylic acid (-COOH), namely S1B-C10, is used as a support to fabricate and confine Ru nanoparticles (NPs). The uniformly dispersed organic functional groups in SBA-1 are beneficial in attracting Ru cations, and as a result, homogenously distributed small sized Ru NPs are formed within the mesopores. The prepared Ru@S1B-C10 is utilized as a catalyst for H2 generation from the hydrolysis of ammonia borane (AB). The Ru@S1B-C10 catalyst demonstrates high catalytic activity for H2 generation (202 mol H2 molRu min−1) and lower activation energy (24.13 kJ mol−1) due to the small sized Ru NPs with high dispersion and the support’s interconnected mesoporous structure. The nanosized Ru particles provide abundant active sites for the catalytic reaction to take place, while the interconnected porous support facilitates homogenous transference and easy dispersal of AB molecules to the active sites. The catalyst demonstrates good recycle ability since the accumulation and leaking of NPs throughout catalysis can be effectively prevented by the support.
Carboxylic acid (–COOH) functionalized large pore mesoporous silica SBA-16 is prepared and utilized as the support to synthesize Cu nanoparticles (NPs). The interaction between the –COOH groups in the support and the metal precursors effectively controls the dispersion and size of the Cu NPs. The Cu NP encapsulated large pore SBA-16 is used as a catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The catalyst shows an excellent reaction rate of 1.55 × 10−2 s−1 and an outstanding activity of 950 s−1 g−1. The prominent catalytic activity can be attributed to the nanoscale dimension of the Cu NPs (ca. 5 nm) and their homogeneous distribution, and the 3D pore architecture of the support that allows easy transportation of the reactants. The cage-type mesopores of the support SBA-16 also effectively prevent aggregation and leaching of Cu NPs, and thus exhibit similar catalytic activity for several cycles, indicative of its superb durability.
A new nanocomposite system based on Fe3O4 nanoparticles confined in three-dimensional (3D) dual-mode cubic porous carbon is developed using the nanocasting and wet-impregnation methods to assess its performance as an anode for lithium-ion batteries. Several Fe3O4 precursor concentrations are chosen to optimize and determine the best-performing nanocomposite composition. The cubic mesoporous carbon CMK-9 offers a better ability for the Fe3O4 nanoparticles to be accommodated inside the mesopores, efficiently buffering the variation in volume and equally enhancing electrode/electrolyte contact for rapid charge and mass transfer. Among the prepared nanocomposites, the Fe3O4(13)@C9 anode delivers an excellent reversible discharge capacity of 1222 mA h g−1 after 150 cycles at a current rate of 100 mA g−1, with a capacity retention of 96.8% compared to the fourth cycle (1262 mA h g−1). At a higher current rate of 1000 mA g−1, the nanocomposite anode offers a superior discharge capacity of 636 mA h g−1 beyond 300 cycles. The present study reveals the use of a 3D mesoporous carbon material as a scaffold for anchoring Fe3O4 nanoparticles with impressive potential as an anode for new-generation lithium-ion batteries.