Ignoring Urban Heat Island (UHI) effects may lead to an underestimation of the building cooling demand. This study investigates the impact of the UHI on the cooling demand in hot-humid cities, employing the Local Climate Zones (LCZs) classification framework combined with the Urban Weather Generator (UWG) model to simulate UHI effects and improve building performance simulations. The primary aim of this research is to quantify the influence of different LCZs within urban environments on variations in the cooling energy demand, particularly during heat waves, and to explore how these effects can be incorporated into building energy models. The findings reveal significant discrepancies in both the average and peak cooling demand when UHI effects are ignored, especially during nighttime. The most intense UHI effect was observed in LCZ 2.1, characterized by compact mid-rise and high-rise buildings, leading to a cooling demand increase of more than 20% compared to suburban data during the heat waves. Additionally, building envelope thermal performance was found to influence cooling demand variability, with improved thermal properties reducing energy consumption and stabilizing demand. This research contributes to the theoretical understanding of how urban microclimates affect building energy consumption by integrating LCZ classification with UHI simulation, offering a more accurate approach for building energy predictions. Practically, it highlights the importance of incorporating LCZs into building energy simulations and provides a framework that can be adapted to cities with different climatic conditions, urban forms, and development patterns. This methodology can be generalized to regions other than hot-humid areas, offering insights for improving energy efficiency, mitigating UHI effects, and guiding urban planning strategies to reduce the building energy demand in diverse environments.

Due to global temperature increases, terraced house (TH) residents face a threat to their health due to poor indoor thermal environments. As buildings are constructed by low-income residents without professional guidance, this study aims to investigate the indoor thermal comfort and energy resilience of THs under the future climate and determine the optimal passive design strategies for construction and retrofitting. By exploring the effects of building envelope structures, adjusting the window-to-wall ratio (WWR) and designing shading devices, EnergyPlus version 22.0 was used to optimize the thermal environment and cooling load of THs throughout their life cycle under future climate uncertainties. Unimproved THs will experience overheating for nearly 90% of the hours in a year and the cooling load will exceed 60,000 kWh by 2100 under the Representative Concentration Pathways (RCP) 8.5 scenario. In contrast, optimization and improvements resulted in a 17.3% reduction in indoor cooling load by increasing shading devices and the WWR, and using building envelope structures with moderate thermal insulation. This study can guide TH design and renovation, significantly reducing indoor cooling load and enabling residents to better use active cooling to combat future overheating environments.