In view of the frequent and costly failures of power converters in wind turbines, a large consortium of research institutes and companies has joined forces to investigate the underlying causes and key driving factors of the failures. This paper presents an exploratory statistical analysis of the comprehensive field data provided by the project partners. The evaluated dataset covers converter failures recorded from 2003-2017 during almost 7400 operating years of variable-speed wind turbines of different manufacturers and types, operating at onshore and offshore sites in 23 countries. The results include the distribution of failures within the converter system and the comparison of converter failure rates among turbines with different generator-converter concepts, from different manufacturers as well as from different turbine generations. By means of combined analyses of converter-failure data with operating and climate data, conditions promoting failure are identified. In line with the results of a previous, much smaller study of the authors, the present analysis provides further indications against the wide-spread assumption that thermal-cycling induced fatigue is the lifetime-limiting mechanism in the power converters of wind turbines. Instead, the results suggest that humidity and condensation play an important role in the emergence of converter failures in this application.

Oil condition monitoring is a common practice in the wind industry. However, the published research about oil degradation in wind turbine gearboxes is limited. This paper aims at providing new information on the oil degradation process by analyzing wind turbine gearbox oils aged in the laboratory and in the field. Oil samples were analyzed in the laboratory and two sensors were used to determine the oil condition by means of dielectric constant and conductivity measurements. Additionally, micropitting tests were carried out for three oils with different base stocks. The results of this study show that viscosity changes of the oils from the field were not significant.Extreme pressure additives depletion and the increase of the iron content are among the most relevant degradation indicators. The oil sensors used in this study provided limited information on the oil degradation process. The accuracy of the sensors was affected by the oil type and its measurement range. The results of the micropitting tests showed that even aged oils exhibited a high micropitting resistance.