Serious borehole instability problems are often related to the presence of weakness planes in rock formations. In this study, we investigated the stability of wellbores drilled along a principal direction and parallel to the weakness planes. We used three different strength criteria (weakness plane model, Hoek and Brown and Nova and Zaninetti) to calculate the mud pressures to avoid slip and tensile failure along the weakness planes. We identified the orientation of the weakness planes that generate the most critical slip condition as a function of the friction angle of the planes. We also identified the range of orientations of the weakness planes that corresponds with the lower mud pressure window. We confirmed the validity of the proposed relationships with comparative stability analyses by using analytical solutions and numerical simulations (Ubiquitous Joint Model, FLAC). We found that the mud pressures calculated with the Hoek and Brown criterion show a particular trend, which cannot be predicted by the weakness plane model. We provided two normalized stability charts to predict mud pressures to prevent slip along the weakness planes in the critical slip condition. Finally, we corroborated our findings by simulating the stability of wellbores drilled in the Pedernales Field (Venezuela) and in oil fields located in Bohai Bay (China).
The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by its objective and, therefore, by the type of technique applied to achieve it. To attain the best results in terms of rock breakage, and with respect to the final profile, it is important to evaluate the specific excavation energy and its optimization. This study, being a revision of different techniques to achieve good quality of the final walls, focuses on evaluating the effects of those techniques on the quality of the result, in both open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunneling blasts. This study aims to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in daily practice.
Rock failure during tunnel excavation is still a matter of concern. The influence of groundwater is generally taken into account along discontinuities or in “soil-like” formations. However, brittle saturated porous rocks can be subject to undrained conditions during tunnel excavation. Negative effective stresses develop close to the tunnel boundary. This study aims at identifying a limit pore pressure in the rock around the tunnel, which induces failure in the tension zone. A discussion related to the strength parameters in the tension zone, with the Hoek and Brown criterion, is presented. A comparative analysis with different far-field stresses and rock properties indicates that the limit pore pressure decreases with the depth of the tunnel. The limit pore pressure is directly proportional to the uniaxial compressive strength and inversely proportional to the constant m. When the uniaxial compressive strength is close to the state of stress around the tunnel, the role of m reduces. Numerical models set up with FLAC indicate that the tension zone around the tunnel has a thickness of about 1 m. Due to uncertainties in the far-field stresses, hydro-mechanical behavior, and properties of the rock, the tension zone requires a careful investigation, in order to avoid stability problems.
The paper investigates the mud pressure to maintain the stability of wellbores drilled in transversely isotropic shale through sensitivity analyses, carried out with analytical and numerical modeling (FLAC). To this end, we interpreted the anisotropic strength of the Tournemire shale with the Weakness Plane Model (WPM) and the modified Hoek–Brown criterion (HBm). The sensitivity analyses of synthetic case studies indicated a different trend in mud pressure for the two criteria. In some cases, the WPM predicts mud pressures higher than those predicted by the HBm and vice versa. The mud pressures predicted by the HBm resulted in being more sensitive to the increase in the anisotropy of the far field stresses for all the inclinations of the weakness planes. In this context, the WPM predicts some anomalous low mud pressures in a wide range of inclinations of the weak planes. The change in the frictional component of strength decreases with an increase in the pore fluid pressure for both criteria. The mud pressure predicted by the WPM resulted in being more sensitive to the change in frictional strength. The change in trend of the two criteria with change in input data suggests caution in the “a priori” selection of the strength criterion. A simple solution is proposed to predict a safe and reliable mud pressure with a small number of lab tests.