Felipe Alberto Villalobos

Prof. Felipe Alberto Villalobos


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2017 in Geotechnical Testing Journal
Verified
Journal Article
Closed access
JAJuan L. Ayala
Juan L. Ayala
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
GAGiovanny Alvarado
Giovanny Alvarado
The objective of the paper is to study the shear stiffness of Bío Bío sand. To this end, a system to measure the travel time of shear waves in Bío Bío sand samples using bender elements was designed and setup in an adapted oedometer device. Measurements were carried out for sand samples with different relative density, pressure/deformation, diameter/height, dry/saturated and varying the frequency, amplitude, and type of the triggered electric signals. The shear wave velocity and elastic shear modulus increased with relative density and effective vertical stress as previously found by other authors. In addition, Hardin type empirical formulas for estimating the elastic shear modulus are used to compare with the experimental results. Estimations proved to be good only in loading for effective vertical stresses around 100 kPa, since underestimation and overestimation of the shear modulus occurred for stresses below and above that value, respectively. Soil shear stiffness during unloading/reloading cycles was underestimated with the expressions used for loading.

1 June 2020 in Obras Y Proyectos
Verified
Journal Article
Open access
PDF file
LDLeonardo Dorador
Leonardo Dorador
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
The geotechnical characterization of coarse granular materials such as very coarse-grained soils, rockfills, mining waste rocks and related materials is one of the key themes in geotechnical engineering but least studied and developed. Although there are some geotechnical standards and accepted geotechnical practice, there is not a standard for size-scaling, which is a critical step in advanced stage engineering (i.e. detailed design) on large structures involving this kind of materials. Several size-scaling techniques are available for use, with advantages and disadvantages. Among these, the parallel gradation method PGM (also known as homothetic grain size distribution), is one of the current practices and used for more than 50 years, but surprisingly just a few studies have corroborated its capability, and under specific material types. This work assesses a detailed database covering the development of this method from its first uses up to now. The application of this method is analysed based mainly on the material maximum internal friction angle and the Marsal’s particle breakage index (B g ).

19 January 2022 in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
Verified
Journal Article
Closed access
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
PRPaula A. Rodríguez
Paula A. Rodríguez
MVMiguel Vera
Miguel Vera
Anisotropy is an important characteristic of rocks, especially distinguishable in metamorphic rocks. Transverse isotropy is a particular case of anisotropy where foliation planes are distributed in the rock mass. Anisotropy can also originate from mineral foliation where minerals are oriented in a preferential direction. This inherent anisotropy can affect the rock strength significantly. Here the effect of foliation on the anisotropic strength of a phyllite is experimentally investigated. Phyllite specimens with defined foliation orientations are prepared and a series of laboratory tests carried out. Results for tensile strength and unconfined compressive strength are analysed. Maximum values of tensile strength and unconfined compressive strength are found for β = 0 and 90° and a significant reduction of strength is found for β = 45°. Compressive triaxial tests are conducted under confining pressures up to 20 MPa. The Hoek–Brown failure criterion is found to capture the experimental results in a better form than the Mohr–Coulomb criterion. Anisotropy indexes are adopted to evaluate the anisotropy effect on strength. Confinement is found to reduce the effect of anisotropy on phyllite strength. Cohesion and angle of shearing resistance were also found to be affected by the stress level, and further influenced by β.

1 December 2020 in Obras Y Proyectos
Verified
Journal Article
Open access
PDF file
LDLeonardo Dorador
Leonardo Dorador
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
The study of materials with large particle size has been a great challenge in geotechnical engineering. Despite the current work around the world using coarse-grained materials CGM in rockfill dams and mining waste rock dumps, for instance the geotechnical characterization of these materials is still an important issue in geotechnical engineering practice which deserve more research. There are standards covering CGM in a few particular applications and scaling methods have been proposed to deal with large particle sizes. However, scaling methods are appropriate only under certain conditions. The scalping techniques consist in a simple approach for the geotechnical characterization of CGM. In this article, the scalping techniques analysed are divided in: the scalping method, the matrix method and the scalping/replacement, which are studied in detail in terms of its effectiveness, focusing on the geomechanical characterization of CGM. As a main conclusion, these three techniques are limited in its use under small scalping ratios (3 < r < 8) which is the ratio of maximum particle size of both original and scalped gradation. Finally, recommendations for the use of percentages and ratio of scalping are provided.

10 August 2023 in Quarterly Journal of Engineering Geology and Hydrogeology
Verified
Journal Article
Closed access
NFNicol E. Flandes
Nicol E. Flandes
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
RKRobert King
Robert King
The effect of rock weathering on geotechnical parameters can become substantial in geotechnical design. The weathering degree (WD) has usually been divided into five levels from fresh rock to completely weathered rock. In this study, the above five WDs are adopted to analyse the variation of several regularly used geotechnical properties. To that aim, a series of laboratory tests on a Chilean granitic rock in different stages of weathering was carried out. The results of the tests have been analysed by normalizing each geotechnical parameter with respect to the value obtained for slightly weathered samples instead of for fresh rock samples as is usually adopted. In this way, it was found that the unconfined compressive strength reduces steadily and considerably with each WD, as has been previously reported. Conversely, the modulus of deformation and P-wave velocity tend to stabilize the rate of reduction for highly and completely weathered rock samples, which does not agree with the trend and higher rate reductions found by other researchers. This stabilization reduction rate with WD was also found for compaction density, friction angle and Poisson's ratio.

5 May 2018 in Revista de la construcción
Verified
Journal Article
Open access
PDF file
FVFelipe Alberto Villalobos
Felipe Alberto Villalobos
ELEladio A. Leiva
Eladio A. Leiva
Oscar JerezOscar Jerez
Oscar Jerez
MPM Poblete
M Poblete
Experimental study of the fine particles effect on the shear strength of tuff zeolites