Capsule endoscopy is a common method for detecting digestive diseases. The location of a capsule endoscope should be constantly monitored through a visual inspection of the endoscopic images by medical staff to confirm the examination’s progress. In this study, we proposed a computer-aided analysis (CADx) method for the localization of a capsule endoscope. At first, a classifier based on a Swin Transformer was proposed to classify each frame of the capsule endoscopy videos into images of the stomach, small intestine, and large intestine, respectively. Then, a K-means algorithm was used to correct outliers in the classification results. Finally, a localization algorithm was proposed to determine the position of the capsule endoscope in the alimentary tract. The proposed method was developed and validated using videos of 204 consecutive cases. The proposed CADx, based on a Swin Transformer, showed a precision of 93.46%, 97.28%, and 98.68% for the classification of endoscopic images recorded in the stomach, small intestine, and large intestine, respectively. Compared with the landmarks identified by endoscopists, the proposed method demonstrated an average transition time error of 16.2 s to locate the intersection of the stomach and small intestine, as well as 13.5 s to locate that of the small intestine and the large intestine, based on the 20 validation videos with an average length of 3261.8 s. The proposed method accurately localizes the capsule endoscope in the alimentary tract and may replace the laborious real-time visual inspection in capsule endoscopic examinations.
In this paper, we proposed a visual position calibration method using colored rectangle signboards for a mobile robot which is designed to work in a room environment. The rectangle signboards are placed in several known positions. By calculate the vanishing points in the image of the signboard, it is possible to obtain the relative direction and distance between the signboard and the robot by a single image. Experiments of position calibration were conducted. The results showed this method is effective and the errors between the set up positions and the experimental results were about 1.7 degrees and 3 cm when the distance to the signboards was set to 100 cm
1 April 2006 in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
In this paper, we proposed a robot self position identification method by active sound localization. This method can be used for autonomous security robots working in room environments. A system using a AIBO robot equipped with two microphones and wireless network is constructed and is used for position identification experiments. Arrival time differences to the microphones of robot are used as localization cues. To overcome the ambiguity of front-back confusion, a three-head position measurement method was proposed. The robot position can be identified by the intersection of circles restricted by the azimuth differences to different speaker pairs. By localizing three or four speakers as sound beacons positioned on known locations, the robot can identify its self position with an average error of about 7 cm in a 2.5 times 3.0 m2 working space
This paper presents the research on stability for biped walking-chair robot with human-in-the-loop. The inherent properties of the biped system with human-in-the-loop for navigation path design and walking gait design are analyzed. Posture stability computation method based on ZMP (zero movement point) theory is discussed. Some suggestions about the future research are also presented.