It has previously been proposed by safeguards experts that curium will track plutonium through a spent fuel pyroprocessing facility, enabling nondestructive assaying of plutonium via counting neutron emissions from 244Cm. This is a critical assumption for the neutron balance approach to safeguards. If Cm and Pu were to behave chemically the same, counting neutrons could be used to estimate Pu concentrations. In this study, plutonium tracking with curium has been investigated using Enhanced REFIN with Anodic Dissolution (ERAD), a one-dimensional transient electrorefiner model based on fundamental electrochemical equations. The model was used to simulate simultaneous deposition of uranium, plutonium, and curium onto a solid metal cathode. Chemical/physical properties used by the model were either obtained from the literature or assumed. The standard exchange current density of curium was estimated by analyzing published cyclic voltammetry data for LiCl-KCl-CmCl3. The focus of the ERAD calculations w...
24 January 2014 in Journal of the Electrochemical Society
Commercial light water reactor (LWR) operators and fuel vendors in the United States are pursuing changes to nuclear fuel that include extended enrichment (EE) and accident-tolerant fuel (ATF) designs to further improve reactor safety and plant economics. Extended fuel enrichments above 5% 235U pin enrichment and up to 10% 235U are a subset of high assay low-enriched uranium (HALEU) that may be deployed in commercial US LWRs in the near term. ATF features, such as cladding coatings or alternative cladding materials, are designed to improve fuel system performance under accident conditions. One goal of EE is to improve fuel cycle economy by enabling fuel to be depleted to higher burnup than the typical current limits (62 gigawatt-days per metric ton of uranium [GWd/MTU]). Adoption of EE, ATF, and high burnup (HBU) fuels in the US commercial fleet requires a clear understanding of the effects on core physics parameters and used fuel isotopic content, as well as confidence in the accuracy of computer code predictions over an expanded range of materials, enrichment, and burnup. A thorough understanding of the applicability and adequacy of benchmark data (e.g., criticality, decay heat, isotopic content) for computer code validation is necessary to ensure that appropriate safety margins are maintained. As part of the US Nuclear Regulatory Commission (NRC) agreement number 31310019N0008, “SCALE Code Development, Assessment and Maintenance,” the effects of EE, ATF, and HBU are being assessed for selected representative LWR fuel designs. The project is divided into phases, and this report summarizes the findings of the Phase 1 work, which focuses on lattice physics parameter and used fuel isotopic changes for a conventional GE14 10 x 10 boiling water reactor (BWR) design with GNF-2 part length rod patterns to model a modern BWR assembly design.