Contaminants of emerging concern (CECs) in water, including pharmaceuticals and personal care products, represent a significant threat to environmental and human health. In this context, the electro-Fenton (EF) process has emerged as a highly effective technique for the removal of such pollutants. This study investigates the innovative use of tea waste material (TWM) in combination with copper-iron nanoparticles (FeCuNPs) to degrade a mixture of CECs. A central aspect of this research is the sustainable reuse of organic waste material, such as TWM, to support catalytic nanoparticles. This approach not only utilizes a resource that would otherwise be discarded but also promotes sustainability in the treatment of contaminated water, aligning with the principles of the circular economy. The as-prepared FeCuNPs@TWM catalyst was fully characterized, and critical parameters influencing the pollutant removal were assessed, including adsorption capacity, catalyst load, and applied current. Under optimized conditions, the EF process, enhanced by FeCuNPs@TWM, achieved complete degradation of the contaminants within 15 min of the electrochemical process, and the activity remained after five catalytic cycles. Results demonstrate that using tea waste functionalized with FeCu nanoparticles as a catalyst not only improves the efficiency of the EF process but also offers an eco-friendly and cost-effective alternative.
We present an alternative measurement technique for the longitudinal spin Seebeck effect (SSE), based on harmonic analysis of the signal measured in the bilayer. In our experimental setup, we use a harmonic magnetic field and a static thermal gradient in the longitudinal configuration to induce a square-wave SSE signal. By using a phase-sensitive detection technique (lock-in), we can reduce the impact of electrical noise, which improves sensitivity and, through harmonic analysis of the measured signal, decouples in real time the SSE signal from other thermoelectric effects.
We have developed a novel, compact and cost-effective magneto-optical method for quantifying the spin-orbit torque (SOT) effective field vector (hSO) in magnetic thin films subjected to spin current injection. The damping-like (hSODL) component of the vector is obtained by the polar Kerr response arising from the out-of-plane magnetization tilting, whereas the field-like component (hSODL) is obtained by current-induced hysteresis-loop shifting study, using conventional longitudinal Kerr magnetometry. We tested our method in FM/NM bilayers comprising NiFe, CoFeB (ferromagnetic layers) and Pt, Pd, Ta (non-magnetic layers). Our findings revealed a damping-like SOT efficiency xiDL of 0.089 pm 0.006,0.019 pm 0.002, and -0.132 pm 0.009 for Pt, Pd, and Ta, respectively. The hSOFL/hSODL ratio was 0.35 pm 0.02 for NiFe/Pt and 0.14 pm 0.002 for Ta/CoFeB bilayers when the ferromagnetic layer thickness is 4nm. A key advancement over the state-of-art magneto-optical methods is the use of an oblique light incidence angle, which allows switching between measuring modes for hSODL and hSOFL, without altering the experimental setup. Moreover, our approach relies exclusively on first-order Kerr effects, thereby ensuring its broad applicability to any type of ferromagnetic material.