To enhance the accuracy of phase measurement and to prevent tracking errors, it is crucial to effectively read the multi-frequency signal in space gravitational wave detection. In this paper, a novel signal acquisition method called the multi-frequency acquisition algorithm is proposed and implemented. Different from the traditional single-frequency acquisition, the signal characteristics of amplitude and frequency are both considered to better distinguish different frequency components. A phasemeter integrated with the acquisition method and narrow-bandwidth digital phase-locked loop is constructed for the method test and verification. The results show that the multi-frequency acquisition unit can capture all the frequencies of an input signal in several milliseconds. The precision is better than ±200 Hz under a low SNR (signal-to-noise ratio) of 0 dB. The phase noise can reach 2 µrad/Hz1/2 in the frequency range of 0.1–1 Hz and satisfy the requirement of the space gravitational wave detection in all frequency ranges.

Since Einstein’s prediction regarding the existence of gravitational waves was directly verified by the ground-based detector Advanced LIGO, research on gravitational wave detection has garnered increasing attention. To overcome limitations imposed by ground vibrations and interference at arm’s length, a space-based gravitational wave detection initiative was proposed, which focuses on analyzing a large number of waves within the frequency range below 1 Hz. Due to the weak signal intensity, the TMs must move along their geodesic orbit with a residual acceleration less than 10⁻¹⁵ m/s²/Hz^1/2. Consequently, the core payload-inertial sensor was designed to shield against stray force noise while maintaining the high-precision motion of the test mass through a drag-free control system, providing an ultra-stable inertial reference for laser interferometry. To meet these requirements, the inertial sensor integrates a series of unit settings and innovative designs, involving numerous subsystems and technologies. This article provides a comprehensive overview of these critical technologies used in the development of inertial sensors for space gravitational wave detection and discusses future trends and potential applications for these sensors.

The precise movement of the test mass along a geodesic is crucial for gravitational wave detection in space. To maintain this motion, the core payload-inertial sensor incorporates multiple functional units designed to mitigate various sources of stray force noise affecting the test mass. Understanding the limits of these noise sources is essential for enhancing the inertial sensor system design. Additionally, thorough ground-based verification of these functional units is necessary to ensure their reliability for space missions. To address these challenges, we developed a low-frequency torsion pendulum apparatus that utilizes a commercial autocollimator as the optical readout element for testing this type of space inertial sensor. This paper provides a comprehensive overview of the apparatus’s operating principle, structural characteristics, and the results of laboratory tests of its background noise. Experimental data demonstrate that the torsion pendulum achieves a sensitivity of 1 × 10⁻¹¹ Nm/Hz^1/2 within the measurement band from 1 mHz to 0.1 Hz, confirming its suitability for various inertial sensor tests. Furthermore, the insights gained from constructing the torsion pendulum will inform future system upgrades.

A tunable and narrow-bandwidth Q-switched ytterbium-doped fiber (YDF) laser is investigated in this paper. The non-pumped YDF acts as a saturable absorber and, together with a Sagnac loop mirror, provides a dynamic spectral-filtering grating to achieve a narrow-linewidth Q-switched output. By adjusting an etalon-based tunable fiber filter, a tunable wavelength from 1027 nm to 1033 nm is obtained. When the pump power is 1.75 W, the Q-switched laser pulses with a pulse energy of 10.45 nJ, and a repetition frequency of 11.98 kHz and spectral linewidth of 112 MHz are obtained. This work paves the way for the generation narrow-linewidth Q-switched lasers with tunable wavelengths in conventional ytterbium, erbium, and thulium fiber bands to address critical applications such as coherent detection, biomedicine, and nonlinear frequency conversion.

The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》，当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊，刊载内容突破了文摘的限制，正式成为学术刊物。

The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》，当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊，刊载内容突破了文摘的限制，正式成为学术刊物。