Sulfamethoxazole [SMX] and metronidazole [MNZ] are emergent pollutants commonly found in surface water and wastewater, which can cause public health and environmental issues even at trace levels. An efficient alternative for their removal is the application of adsorption technology. The present work evaluated single and binary adsorption processes using granular activated carbon (CAG F400) for SMX and MNZ in an aqueous solution. The binary adsorption process was studied using a Box–Behnken experimental design (RSD), and the results were statistically tested using an analysis of variance. Density functional theory (DFT) modeling was employed to characterize the interactions between the antibiotics and the CAG F400 surface. For the individual adsorption process, adsorption capacities (qe) of 1.61 mmol g−1 for SMX and 1.10 mmol g−1 for MNZ were obtained. The adsorption isotherm model that best fit experimental data was the Radke–Prausnitz isotherm model. The adsorption mechanism occurs through electrostatic and π-π dispersive interactions. For the binary adsorption process, the total binary adsorption capacity achieved was 1.13 mmol g−1, evidencing competitive adsorption. The significant factors that determine the removal of SMX and MNZ from a binary solution were the solution pH and the initial concentration of antibiotics. From DFT studies, it was found that SMX adsorption on CAG F400 was favored with adsorption energy (Eads) of −10.36 kcal mol−1. Finally, the binary adsorption results corroborated that the adsorption process was favorable for both molecules.
This study presents a comparative analysis of the adsorption behavior of three industrial ionic dyes—Indigo Carmine (IC), Congo Red (CR), and Evans Blue (EB)—using two adsorbent materials with distinct physicochemical and textural properties: bone char (BC) and activated carbon cloth (ACC). The main objective was to evaluate and compare the adsorption equilibrium and kinetics of these dyes on both materials. Equilibrium behavior was analyzed using the Prausnitz–Radke isotherm model, while adsorption kinetics were evaluated using PVSDM. The results showed that adsorption onto BC was primarily driven by electrostatic interactions, enhanced by the presence of hydroxyapatite. The maximum adsorbed amounts were determined to be 0.296, 0.107, and 0.0614 mmol g−1 for CR, IC, and EB, respectively. In contrast, adsorption on ACC was influenced by both electrostatic and hydrophobic forces due to its carbonaceous composition. IC exhibited significantly higher adsorption on ACC (1.087 mmol g−1), whereas CR and EB only 0.269 mmol g−1 and 0.028 mmol g−1, respectively. Kinetic studies revealed that intraparticle transport was the rate-limiting step across all systems. Specifically, pore volume diffusion controlled the adsorption rate on ACC, with mean diffusion coefficients of 9.72 × 10−8, 1.83 × 10−9, and 1.48 × 10−10 cm2 s−1 for IC, CR and EB, respectively. Conversely, for BC, adsorption surface diffusion played a dominant role in the adsorption of IC and CR, with mean diffusion coefficients of 1.62 × 10−9 and 7.28 × 10−10 for IC and CR, respectively. These findings underscore the importance of considering both equilibrium and kinetic parameters in the design of efficient wastewater treatment systems.
The experimental and numerical analysis of pyridine adsorption onto activated carbon cloth in a stirred batch adsorber under transition and turbulent regime is presented in this work. Three-dimensional numerical modeling of the adsorption process was implemented for the identification of local velocity, local concentration, and concentration gradients inside the adsorber. This represents a costly computational effort in comparison with conventional batch adsorption models, as for instance the Langmuir kinetic model. Both types of modeling yield comparable results, but the advantage of the 3D modeling is a more detailed resolution of variables, thus avoiding the perfectly mixed assumption. Varying the agitation rate (30–200 rpm) and pyridine initial concentration (99 to 487 mg/L), several kinetic and transport parameters were reported. Hydrodynamic and mass boundary layers are identified around the activated carbon adsorbent following the trajectory of agitation. Furthermore, the major pyridine mass flux takes place around the adsorbent, mainly in the posterior zone regarding the agitation direction. This information is crucial in searching for and designing more efficient and intensive adsorbent systems.