Q345 steel is usually used on structures working under high temperature where creep deformation could endanger their structural integrity. In order to support the application of steel structures made of Q345 under high temperature, a fracture analysis on defective Q345 steel in the process of small-scale creep crack propagation has been performed. Three-dimensional finite element models with a semi-elliptical surface crack have been established, and the crack propagation process of Q345 steel has been simulated at 400 °C. The constraint effect near the crack tip in the process of creep crack propagation has been analyzed using the J-A2 two-parameter method in which the influence of the crack aspect ratio, loading level, and biaxial loading ratio was studied. The previously developed constraint-based R6 procedure was adopted to assess the structural integrity of the cracked structure under small-scale creep conditions. The results showed that small-scale creep crack propagation behavior exhibits great influence on both crack tip fields and a constraint effect near the crack tip. The increase in the biaxial loading ratio, loading level, and aspect ratio of the crack could lead to an increase in the J integral, an enhancement of the constraint effect, and a decrease in the safe area in the failure assessment diagram for the cracked structure in the process of small-scale creep crack propagation.
Ultra-high-performance concrete (UHPC) is a cement-based composite material characterised by exceptional strength, low porosity and high durability, making it highly promising for reinforcement engineering. Based on the theory of tangential modulus, a calculation method has been developed for the axial compression capacity of reinforced concrete (RC) medium and long columns strengthened with UHPC, using the constitutive relation of materials and internal and external force balance conditions. This study analysed the influence of UHPC reinforcement layer thickness, reinforced layer, reinforcement ratio, column slenderness ratio and initial load level of core columns on the bearing capacity of reinforced columns. The results indicated that the bearing capacity of the mid-long columns increases with the thickness of the UHPC reinforcement layer and its reinforcement ratio. In addition, the bearing capacity decreases with the increase in the column slenderness ratio and initial load level of the core column.
Reinforced concrete (RC) shear walls are frequently susceptible to construction-induced defects, such as localized basal holes, honeycombing, and reinforcement exposure. To ensure the structural integrity and seismic performance of these compromised components, this study proposed a targeted repair methodology utilizing Ultra-High-Performance Concrete (UHPC) and systematically evaluated its seismic performance. A comparative experiment was conducted, involving low-cycle reversed loading tests on both a UHPC-repaired specimen with localized defects and an intact specimen. Compared with the intact specimen, the repaired specimen exhibited significant enhancements in cumulative energy dissipation and ductility, increasing by 43.2% and 22.2%, respectively. At the same time, the hysteresis curve of the UHPC-repaired specimen became fuller, compared to the intact specimen. To further delineate the underlying seismic performance, a numerical parametric study was performed using the finite element method, investigating the sensitivities of repair area ratio, axial compression ratio and aspect ratios. The results demonstrated that the UHPC-repaired specimen exhibited seismic performance generally comparable to that of the intact specimen under the investigated conditions, providing a reliable solution for such construction defects.