As global CO2 emissions continue to rise, addressing their environmental impact is critical in combating climate change. Photocatalytic CO2 reduction, which mimics natural photosynthesis by converting CO2 into valuable fuels and chemicals using solar energy, represents a promising approach for both reducing emissions and storing energy sustainably. However, the development of efficient photocatalysts, particularly those capable of absorbing visible light, remains a challenge. Graphitic carbon nitride (g-C3N4) has gained attention for its visible light absorption and chemical stability, though its performance is hindered by rapid electron–hole recombination. Similarly, bismuth tungstate (Bi2WO6) is a visible-light-active photocatalyst with promising properties, but also suffers from limited efficiency due to charge recombination. To overcome these limitations, this study focuses on the design and synthesis of a g-C3N4/Bi2WO6 composite photocatalyst, leveraging the complementary properties of both materials. The composite benefits from enhanced charge separation through the formation of a heterojunction, reducing recombination rates and improving overall photocatalytic performance. The optimized g-C3N4/Bi2WO6 composite exhibited significant improvements in the production rates of both CH4 and CO, achieving 18.90 and 17.78 μmol/g/h, respectively, which are 2.6 times and 1.6 times higher than those of pure Bi2WO6. The study explores how optimizing the g-C3N4/Bi2WO6 interface, increasing surface area, and adjusting material ratios can further enhance the efficiency of CO2 reduction. Our findings demonstrate the potential of this composite for solar-driven CO2 conversion, offering new insights into photocatalyst design and paving the way for future advancements in CO2 mitigation technologies.
This study reports the preparation of benzalkonium chloride-modified montmorillonite (MMT-1227) via a wet chemical method and systematically investigates its structural characteristics and antimicrobial/antifungal properties. The modified montmorillonite was comprehensively characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Brunauer–Emmett–Teller (BET) surface area analysis. The results confirmed the successful intercalation of benzalkonium chloride into montmorillonite layers, leading to altered surface morphology, increased interlayer spacing, and enhanced hydrophobicity. Antimicrobial assays demonstrated that MMT-1227 exhibits potent activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, with inhibition zone diameters of 15.6 ± 0.2 mm and 17.7 ± 0.2 mm, respectively, and minimum inhibitory concentrations (MIC) of 1 mg/mL and 0.5 mg/mL. When incorporated into latex paint at a mass fraction of 0.3%, MMT-1227 achieved a 99.9% antibacterial rate against both strains after 24 h. Additionally, fungal resistance testing in accordance with GB/T 1741-2020 revealed that the modified paint films completely inhibited the growth of eight common mold strains (e.g., Aspergillus niger, Trichoderma viride), achieving a resistance grade of 0. These findings validate that benzalkonium chloride modification endows montmorillonite with excellent antimicrobial and antifungal properties, highlighting its potential as a high-performance additive for functional coatings and related antimicrobial materials.
A modular strategy for the molecular design of silicone-based antifoaming agents was developed by precisely controlling the architecture of poly (methylhydrosiloxane) (PMHS). Sixteen PMHS variants were synthesized by systematically varying the siloxane chain length (L1–L4), backbone composition (D3T1 vs. D30T1), and terminal group chemistry (H- vs. M-type). These structural modifications resulted in a broad range of Si-H functionalities, which were quantitatively analyzed and correlated with defoaming performance. The PMHS matrices were integrated with high-viscosity PDMS, a nonionic surfactant, and covalently grafted fumed silica—which was chemically matched to each PMHS backbone—to construct formulation-specific defoaming systems with enhanced interfacial compatibility and colloidal stability. Comprehensive physicochemical characterization via FT-IR, 1H NMR, GPC, TGA, and surface tension analysis revealed a nonmonotonic relationship between Si-H content and defoaming efficiency. Formulations containing 0.1–0.3 wt% Si-H achieved peak performance, with suppression efficiencies up to 96.6% and surface tensions as low as 18.9 mN/m. Deviations from this optimal range impaired performance due to interfacial over-reactivity or reduced mobility. Furthermore, thermal stability and molecular weight distribution were found to be governed by repeat unit architecture and terminal group selection. Compared with conventional EO/PO-modified commercial defoamers, the PMHS-based systems exhibited markedly improved suppression durability and formulation stability in high-viscosity environments. These results establish a predictive structure–property framework for tailoring antifoaming agents and highlight PMHS-based formulations as advanced foam suppressors with improved functionality. This study provides actionable design criteria for high-performance silicone materials with strong potential for application in thermally and mechanically demanding environments such as coating, bioprocessing, and polymer manufacturing.
Poly(9,9-di-n-octylfluorene) (PFO) applications are limited by green emission defects and imbalanced charge transport. To overcome this, novel branched polystyrene-graft-polyfluorene (PSt-g-PFO) copolymers with varying grafting densities were synthesized. The highly branched architecture induces intense steric hindrance, acting as a physical shield to isolate PFO emissive cores. This successfully suppresses detrimental interchain π–π stacking, mitigating the ~530 nm green emission. Furthermore, the moderately grafted PSt-g-PFO2 promotes locally ordered crystalline packing, achieving a maximum electron mobility of 6.16 × 10−6 cm2/(V·s), an order of magnitude higher than linear PFO. This structural design effectively decouples deleterious aggregation from charge transport.