The aim of this study was to evaluate the effects of different inter-implant distances on stress distribution in the bone around the endosseous titanium implants under vertical, oblique and horizontal loads in the posterior mandibular edentulousim by finite element analysis (3D FEA). 3D FEA models representing mandible and ITI implant (Straumann, Waldenburg, Switzerland) were simulated. The distances in-between the units were set at 0.5, 1.0 and 2.0 cm. Vertical (V) 70 degrees N, 60 degrees oblique (BL) 35 degrees N in buccolingual direction and horizontal (MD) 14 degrees N in mesiodistal direction loads were applied to each of these designs. The principal stresses (tensile and compressive stress) on each model were calculated using MSC MARC finite element analyze solver software. The tensile stress (P(max)) values have been evaluated that they rose at the cervical region of buccal side when the inter-implant distances increased under V and BL loads and they diminished while the inter-implant distances decreased. In short inter-implant distances the compressive stress (P(min)) has been presented with increased values and found at the lingual surface of the cervical region. The results of this study indicated that the magnitude of the stress was influenced by complex factors such as the direction of loads and the distance between adjacent fixtures. The stress occurring around fixtures differs significantly with various types of inter-implant distance. The evaluation of tensile and compressive stresses for cortical and cancellous bone under V, MD and BL loading conditions in aspect of inter-implant distance shows; the 1.0 cm of inter-implant distance is the optimum distance for two fixture implantation.
Objectives: This study aimed to compare the effects of surgically assisted rapid palatal expansion (SARPE) techniques and their combinations on the stresses (von Mises, maximum principal, and minimum principal) and displacements that occur in the maxilla, facial bones, and maxillary teeth using three-dimensional finite element analysis (FEA). Methods: SARPE was simulated using seven different osteotomy techniques. The FEA models were simulated with a combination of various osteotomies, including midpalatal and lateral osteotomies, lateral osteotomy with a step, and separation of the pterygomaxillary junction. For each osteotomy variant, the instantaneous displacements and stresses resulting from forces applied by a 1 mm expansion of a tooth-borne appliance were evaluated. Results: Midpalatal osteotomy increased lateral displacement in the alveolar bone margins and intermaxillary suture while significantly reducing stresses around the intermaxillary suture. The addition of a pterygomaxillary osteotomy to the midpalatal and lateral osteotomies effectively reduced stresses in the posterior maxilla and cranial structures while enhancing lateral displacement. Although lateral osteotomy significantly reduced stresses in the midface, its effect on maxillary expansion was limited. Stepped lateral osteotomy had minimal effects on transverse displacement and stress reduction. Conclusions: Increasing the number of osteotomies reduced stress levels in the maxilla while enhancing lateral displacement. These results highlight the importance of selecting the most appropriate osteotomy technique to achieve optimal outcomes.
Amaç: Bu çalışmanın amacı, sistemik hastalıklar, ilaç kullanımı, yaşlılık gibi durumların yanında sabit ve hareketli diş protez uygulamalarının, ortodontik bozuklukların ağız kuruluğuna etkilerinin belirlenerek, ağız kuruluğunun getirdiği olası komplikasyonların önüne geçmek ve ağız kuruluğunun prevalansını literatüre kazandırmaktır. Gereç ve Yöntem: Yaşları 16 – 90 arası değişen, rastgele seçilmiş 210 hastaya, ağız kuruluğunu subjektif olarak değerlendirmek için hazırlanmış olan sorulardan oluşturulmuş anket formları doldurtulmuştur. Anket formları doldurtulduktan sonra hastalardan steril tükürük toplayıcı kaplara 6 dk boyunca yutkunmadan tükürmeleri istenmiştir. Bulgular: Ağız kuruluğuna sebep olabilecek ilaç kullanımıyla, sistemik hastalıkların kserostomia ile direkt ilişkili olduğu saptanmıştır. Protez kullanımının ve artan yaşın, ağız kuruluğu ile doğru orantılı bir ilişkisi bulunmuştur. Tükürük akış hızı ortalaması 0,25 ml/dk olarak tespit edilmiş ve 44 hastada hiposalivasyon saptanmıştır (%21). Sonuç: Cinsiyetin ağız kuruluğuna çok fazla bir etkisi olmadığı ve ağız kuruluğu prevalansının farklı oranlarda görülebildiği tespit edilmiştir. Sigara kullanımının tükürük akış hızını azalttığı; ancak hiposalivasyona neden olan primer etken olmadığı görülmüştür. Ağız kuruluğunda öncelikle ilaç kullanımı, sistemik hastalıklar, yaş ve protez kullanımının etkili olduğu tespit edilmiştir.