The objective of our paper is to compute images of reflecting‐scattering elements in the investigated geological medium for a given velocity model, i.e., for a model that describes the traveltime of waves with a sufficient degree of accuracy. At present, many approaches exist for computing wave images. Following [1], all of them can be divided into two main (kinematic and dynamic) families. In our work, we shall deal with the dynamic approach. We shall be interested in the procedures for computing the images in true amplitudes, i.e., in amplitudes whose realizations are used to compute images free of the influence of the overlying strata and the system of perturbation and recording (illumination
1 November 2019 in Journal of Physics: Conference Series
Numerical simulation of seismic waves’ propagation and imaging in a three-dimensional multiscale geological media is one of the main trends in the development of modern geophysics. We present the work flow for construction of the 3D digital twin of some real geological object. This object is cavernous fractured carbonate reservoir near the Riphean roof. One of the main features of this object is the presence of the family of faults filled with tectonic breccia. To simulate them, in particular, their interiors and surrounding damaged areas, we simulate paleotectonic processes with the use of 3D discrete elements technique. This simulation we do by GPU parallelization. Next, when the fine digital geological model is done, we perform 3D finite-difference simulation of the seismic waves’ propagation and get the full 3D synthetic data set. To do this simulation we use an original technique based on local grid refinement in time and space. To be able to deal with huge amount of input/output data we use High-Performance Computing (HPC) systems with parallel architecture and hybrid parallelization strategy by simultaneous use of MPI and OpenMP. The final step is validation of our original multiscale algorithm for seismic imaging, which suppresses specular reflection, but accumulates weak scattered/diffracted waves. This approach opens the way to the reconstruction of subseismic geological objects, like fractures, fracture corridors and clusters of caves. To construct these images we use HPC with parallel architecture and MPI+OpenMP programming.
The depth velocity model is a critical element for providing seismic data processing success, as it is responsible for the times of waves’ propagation and, therefore, prescribes the location of geological objects in the resulting seismic images. Constructing a deep velocity model is the most time-consuming part of the entire seismic data processing, which usually requires interactive human intervention. This article introduces the consistently numerical method for reconstructing a depth velocity model based on the modified version of the elastic Full Waveform Inversion (FWI). The specific feature of this approach to FWI is the decomposition of the space of admissible velocity models into subspaces of propagator (macro velocity) and reflector components. In turn, the latter transforms to the data space reflectivity on the base of migration transformation. Finally, we perform minimisation in two different spaces: (1) Macro velocity as a smooth spatial function; (2) Migration transforms data space reflectivity to the spatial reflectivity. We present numerical experiments confirming less sensitiveness of the modified version of FWI to the lack of the low time frequencies in the data acquired. In our computations, we use synthetic data with valuable time frequencies from 5 Hz.
The East Siberian Arctic shelf is the area where the largest natural gas reserves are concentrated. The formation of permafrost of the Arctic shelf during the Ice Age contributed to the emergence of a zone of stable existence of gas hydrates in the sedimentary layer, and subsequent flooding of the shelf led to its gradual degradation, the thawing of gas hydrates and the subsequent emissions of methane into the atmosphere. In the first part of the paper, we use mathematical modeling to study the processes of the formation of subsea permafrost on the Arctic shelf considering changes in the sea levels over the past 200 thousand years. Numerical simulations show the influence of climate warming up to 2200 on the degradation of subsea permafrost and the violation of the conditions for the stable existence of methane hydrates in bottom sediments using the example of the East Siberian shelf. The second part of the paper proposes a method for seismic monitoring of the state of gas hydrates based on a solution of multi-parameter inverse seismic problems. In particular, the degree of attenuation of seismic energy is one of the objective parameters for assessing the consolidation of gas hydrates: the closer they are to the beginning of decomposition, the higher the attenuation and, hence, the lower the quality factor. In this publication, we do not solve a multi-parameter inverse seismic problem for a real geological object. This would be impossible due to the lack of necessary data. Instead, we focus on substantiating the possibility of correct solutions for the problem of the reconstruction of the absorption and velocities for a viscoelastic medium in relation to the problem of monitoring the state of gas hydrate deposits. As noted in a range of publications, the thawing of gas hydrates leads to an increase in the fluid saturation of the geological medium followed by an increase in the absorption of seismic energy—that is, a decrease in the quality factor. Thus, the methods of seismic monitoring of the state of gas hydrates to predict the possibility of developing dangerous scenarios should be based on solving a multi-parameter inverse seismic problem. This publication is devoted to the presentation of this approach.