Through studying the effects of the Al–5Ti-x(Mg–30%Ce) refiner on the microstructure of the Al–7Si alloy, we investigated the hardness, tensile, and impact properties of the Al–Si alloy before and after refinement. The refinement results show that Mg–30%Ce can improve the refinement effect of Al–5Ti on Al–7Si, and also refine α-Al and eutectic Si in Al–7Si. When 2%Mg–30%Ce is added, the refining effect of the aluminum–silicon alloy is most obvious. After refinement, the hardness and tensile properties of the Al–7Si alloy improve. When 2%Mg–30%Ce is added to the refiner, the tensile properties of the Al–Si alloy are the best. Dynamic mechanical tests were conducted on refined Al–7Si alloy. The impact toughness of Al–7Si–(Al–5Ti-2(Mg–30%Ce) improved and the impact toughness reached 34.91 J/cm², which is 78.7% higher than that of Al–7Si–(Al–5Ti) specimens. The separate Hopkinson pressure bar test results show that, under a high strain rate, the strain rate sensitivity of the prepared Al–Si alloy is significant. The specimens of Al–7Si–(Al–5Ti-2(Mg–30%Ce) demonstrated the best anti-impact performance at the same velocity.

In this paper, experiments and finite element analysis methods were adopted to study the flexural performance of shape memory alloy hybrid composites (SMAHC). The effect of embedding content and position of shape memory alloy (SMA) wire on the flexural properties of composite laminates was analyzed, and the optimal content and position of SMA wire were obtained. The optimal number of SMA wires for SMAHC laminates (B-2) is four. Compared with GFRP laminates, the flexural modulus of B-2-4 laminates increases by 5.19%, while the strength decreases by 5.76% on average. The finite element model of the SMAHC laminate was established by using ABAQUS finite element analysis software, and the validity of the model was verified by the comparison between the simulation results and the experimental results. The microscopic morphology results show that the weak interface between the matrix and SMA has a certain influence on the flexural performance of SMAHC specimens.

The hypersonic flow field around a blunt cone was simulated using a high-order finite difference method. Fast acoustic waves, slow acoustic waves, entropy waves, and vortical waves were introduced into the free-stream to determine the influence of a free-stream with disturbances on the hypersonic flow field and boundary layer. The effect of disturbance type on the evolution of perturbations in the hypersonic boundary layer was analyzed. Fast Fourier Transform was adopted to analyze the effect of the disturbance type on the evolution of different modes in the boundary layer. A roughness element was introduced into the flow field to reveal the impact of the roughness element on hypersonic boundary layer receptivity. The results showed that a free-stream with disturbances affected the hypersonic flow field and boundary layer; acoustic waves had the greatest influence. The impact of slow acoustic waves on the flow field was mainly concentrated in the region between the shock and the boundary layer, whereas the influence of fast acoustic waves was mainly concentrated in the boundary layer. Multi-mode perturbations formed in the boundary layer were caused by the free-stream with disturbances, wherein the fundamental mode was the dominant mode of the perturbations in the boundary layer caused by fast acoustic waves, entropy waves, and vortical waves. The dominant modes of the perturbations in the boundary layer caused by slow acoustic waves were both the fundamental mode and the second harmonic mode. The roughness element changed the propagation process of different modes of perturbations in the boundary layer. In the downstream region of the roughness element, perturbations in the boundary layer caused by the slow acoustic waves had the greatest influence. The second harmonic mode in the boundary layer was significantly suppressed, and the fundamental mode became the dominant mode. The effects of fast acoustic waves and entropy waves on the boundary layer receptivity were similar, except the amplitude of the perturbations in the boundary layer caused by the fast acoustic waves was larger.

A high-order finite difference method was used to simulate the hypersonic flow field over a blunt cone with different height roughness elements. The unsteady flow field induced by pulse disturbances was analyzed and compared with that under continuous disturbances. The temporal and spatial evolution characteristics of disturbances in the boundary layer were investigated and the propagation of different disturbance modes in the boundary layer was researched through the fast Fourier transform (FFT) method. The effect of the roughness element on the receptivity characteristic of the hypersonic boundary layer under pulse entropy disturbances was explored. The results showed that the different mode disturbances near roughness in the boundary layer were enlarged in the upstream half of the roughness element and suppressed in the downstream half. However, the effect of roughness weakened gradually as the disturbance frequency increased in the boundary layer. A phenomenon of mode competition in the downstream region of the roughness element exited. As the disturbances propagated downstream, the fundamental mode gradually became the dominant mode. A certain promotion effect on the mode competition was induced by the roughness element and the effect was enhanced with the increase in the roughness element height.