senthil kumar D

Dr. senthil kumar D

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2020 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
SDsenthil kumar D
senthil kumar D
STS. Thirumalini
S. Thirumalini
Efforts to improve air quality have led to use of alternate fuels and design modification that includes optimisation of fuel injection parameters. The effects of Injection Timings (IT) and split injection on performance and emission characteristics of a diesel engine with cashew nut shell biodiesel blends are experimentally investigated. The various blends, retarded timings and split injections used are vis-a-vis: B5 and B10, 2° crank angle (CA) and 4° CA from existing timing and 5%, 10%, and 15% of mass of main injection at 2200 rpm. NOx reduced by 17.8%,11.8%, 27.5% for diesel, B5, B10 respectively at 4° retarded CA with 10% split compared to base IT with single injection. Smoke reduced by 19.5%, 73.8% for diesel and B5 respectively at 4° retarded CA and 15% split. It is found that lower emissions are attained without affecting the performance for all fuel blends with retarded injection timing and split injections.

31 December 2022 in Emission Control Science and Technology
Verified
Journal Article
Closed access
PDF file
SDsenthil kumar D
senthil kumar D
SMSivanesan Murugesan
Sivanesan Murugesan

28 July 2020 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
SDsenthil kumar D
senthil kumar D
STS. Thirumalini
S. Thirumalini
Stringent emission norms and requirement of energy security facilitate researchers to explore use of alternate fuels and work on methods to the optimize fuel injection parameters. The effects of Injection Timings (IT), split injection and Exhaust Gas Recirculation (EGR) on performance, emission characteristics of diesel engine fuelled with cashew nut shell biodiesel blends are investigated. Initially experiments are conducted with diesel,B5,B10 with original injection timing of 14.2° bTDC with direct injection and are considered as base reading. The fuel injection is optimized (at 10.2° bTDC,15% split injection) and the effect of EGR rate at this optimized condition is analysed. Experiments are conducted with diesel,B5,B10 with EGR rates of 5%,10%,15%,20% at optimized injection condition for various loads. NOx reduced by 67%,68%,56% for diesel,B5,B10 at full load as compared to base readings. Smoke emissions reduced by 3-3.5% and CO emissions reduced by around 50% for diesel and biodiesel blends at full load.

1 September 2016 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
MAM Abilash
M Abilash
SDsenthil kumar D
senthil kumar D
GPG Padmanabham
G Padmanabham
PAPaniprabhakar
Paniprabhakar
PRPADMANABAN Ramasamy
PADMANABAN Ramasamy
TSThirumalini Subramaniam
Thirumalini Subramaniam
In this paper, hybrid laser-arc welding process has been studied based on the relative position of the laser and the arc (i.e. laser-leading and arc-leading arrangement) and, the effects of welding parameters, such as the laser power, arc current, arc voltage and the welding speed on the weld bead were investigated. The study indicates that the welding direction has a significant effect on the weld bead and weld pool behaviour. The result shows that laserleading configuration shows better bead characteristics when compared to arc-leading configuration. This is because in the laser-leading case molten metal flow is inward, while in the arc-leading case the metal flow is outward leading to variation in solidification front resulting in lack of synergic effects of both processes.

1 February 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
RHR Harsh
R Harsh
HSHitish Srivastav
Hitish Srivastav
PBPrabhat Balakrishnan
Prabhat Balakrishnan
VSVivek Saini
Vivek Saini
SDsenthil kumar D
senthil kumar D
TSThirumalini Subramaniam
Thirumalini Subramaniam

19 May 2016 in Indian Journal of Science and Technology
Verified
Journal Article
Open access
PDF file
RVR. Vishnu Varthan
R. Vishnu Varthan
SDsenthil kumar D
senthil kumar D
Fossil fuel reserves are depleting at an alarming rate and may become extinct in few decades. To counteract this crisis much emphasis is laid out on usage of alternate fuels. Also techniques like turbocharging are used to increase the efficiency of the IC engines thereby reducing the fuel consumption. While opting for such alternate solutions like biodiesel and turbocharging, the exhaust emissions should be checked to ensure that these solutions don’t pose a threat to the environment. So in this project the change in amount of component gases in the exhaust emissions were found out in four cases which are naturally aspirated with diesel, turbocharged with diesel, naturally aspirated with biodiesel and turbocharged with biodiesel. A single cylinder motorcycle diesel engine is used in this project. Emission characteristic tests were done in the naturally aspirated engine using diesel and biodiesel as fuels. Then a turbocharger designed for this engine is fitted to it and the same tests as above were conducted. Comparison in exhaust emissions which are NOx, HC, CO and CO2 was made for the above mentioned four cases. It was found that NOx emissions has increased by the usage of biodiesel as fuel, while turbocharger has decreased the NOx levels. This is a concern to be addressed while using biodiesel as alternate fuel. Biodiesel and turbocharger both had a positive effect on HC emissions, i.e. reduced the HC emissions. The impact of biodiesel and turbocharger on CO emissions was not so significant with the former increasing the emissions and the latter decreasing it by providing more oxygen. Though CO2 is not categorised as toxic emissions like other emissions; it is important to compare the amount emitted in the different cases. Biodiesel increases the amount of less-toxic CO2 whereas turbocharger has reduced the CO2 emissions. This is because the excess oxygen provided by turbocharging is used for the formation of water vapour rather than CO2. Thus the important four emissions were compared to appreciate the effect of biodiesel and turbocharger. In future work the problem of increase in NOx by biodiesel fuel should be addressed and solution has to be formulated.