Novel fundamental notions helping in the interpretation of the complex dynamics of nonlinear systems are essential to our understanding and ability to exploit them. In this work we predict and demonstrate experimentally a fundamental property of Kerr-nonlinear media, which we name mode rejection and takes place when two intense counter-propagating beams interact in a multimode waveguide. In stark contrast to mode attraction phenomena, mode rejection leads to the selective suppression of a spatial mode in the forward beam, which is controlled via the counter-propagating backward beam. Starting from this observation we generalise the ideas of attraction and rejection in nonlinear multimode systems of arbitrary dimension, which paves the way towards a more general idea of all-optical mode control. These ideas represent universal tools to explore novel dynamics and applications in a variety of optical and non-optical nonlinear systems. Coherent beam combination in polarisation-maintaining multicore fibres is demonstrated as example.
Compact power splitters are essential components in integrated optics. While 1 × 2 power splitters with uniform splitting are widely used, a 1 × N splitter with arbitrary number N of ports and arbitrary splitting ratio is yet to be demonstrated. In this work we address this problem. We fabricate and characterise 1 × N integrated power splitters that provide fully arbitrary splitting ratios. The core of our design is represented by an array of N non‐equally spaced waveguides fabricated on a silicon nitride‐on‐insulator wafer. Any arbitrary 1 × N splitting ratio can be achieved by properly setting the array length and the dimension of the ( N –1) nano‐gaps between the adjacent waveguides. Most importantly, at variance with state‐of‐the‐art solutions, our devices can be designed for arbitrary splitting of higher‐order modes. In this manuscript we provide the first experimental demonstration of 1 × N arbitrary splitting ratio for both the fundamental modes (TE00 and TM00) and the TE01 mode, here up to N = 5 ports. With a footprint of 20 μm 2 /port, a bandwidth up to 70 nm and an excess losses <0.2 dB, our devices set a new benchmark for optical power splitters in both standard single‐mode photonics as well as in the emerging integrated multimode photonics technology, and may therefore boost key photonic applications, from optimal power distribution and equalization up to signal processing operations.
We introduce a 1 × N integrated power splitter for the multimode photonics platform. The device converts an input laser beam into a higher-order mode beam, which afterwards is split. The core of this setup is represented by a non-uniform array of N waveguides that allows achieving arbitrary power splitting. The system exhibits high modal purity and is tested against wavelength variations and fabrication errors. The possibility to include a multi-input port configuration, leading to various power ratios via a single device, provides further flexibility. Our analysis is validated by finite-element-method simulations. At the best of our knowledge, this represents the first design of a device for arbitrary 1 × N power splitting of higher-order modes.
29 October 2020 in Journal of Lightwave Technology
We demonstrate an 80 nm bandwidth (extending from 1529 nm to 1609 nm), dual-stage, diode-pumped, lumped Raman amplifier using a relatively short total length (2 km) of highly nonlinear fiber. The impact of Rayleigh back scattering is mitigated and the build-up of thermally generated wavelength dependent noise is controlled by suitably adjusting the spectral gain profile in the two amplifier stages. In this way a high overall gain of 27 dB with 2.6 dB gain flatness and an average noise figure of 5.8 dB with <1 dB variation is achieved across the full amplifier bandwidth.
Reconfigurable photonic systems provide a versatile platform for dynamic, on-demand control and switching. Here we introduce an all-optical platform in multimode and multicore fibres. By using a low-power probe beam and a counter-propagating control beam, we achieve dynamic control over light propagation within the fibres. This setup ensures simultaneous phase-matching of all probe-control beam four-wave mixing interactions, enabling all-optical reconfiguration of the probe modal state by tuning the control beam power. Key operations such as fully tuneable power splitting and mode conversion, core-to-core switching and combination, along with remote probe characterization, are demonstrated at the sub-nanosecond time scale. Our experimental results are supported by a theoretical model that extends to fibres with an arbitrary number of modes and cores. The implementation of these operations in a single platform underlines its versatility, a critical feature of next-generation energy-efficient photonic systems. Scaling this approach to highly nonlinear materials could underpin photonic programmable hardware for optical computing and machine learning.
We report theoretical and experimental results on a wavelength converter based on intermodal phase matching in a graded index three-mode elliptical-core fiber. Here, two copolarized pump waves propagate in one spatial mode, whereas a signal and the corresponding generated idler propagate in another mode. We demonstrate that the idler power is independent of the signal polarization in both a 1 km and a 50 m long fiber. We attribute this polarization insensitivity to the fast random birefringence of the fiber under investigation in combination with the copolarized pump configuration.