Continental high water-cut reservoirs commonly exhibit strong heterogeneity, high viscosity, and insufficient reservoir drive, which has motivated the deployment of polymer-based composite chemical flooding, such as surfactant–polymer (SP) and alkali–surfactant–polymer (ASP) processes. However, conventional experimental techniques have limited ability to resolve intermolecular forces, and the coupled mechanism linking “formulation composition” to “microstructural evolution” remains insufficiently defined, constraining improvements in field performance. Here, scanning electron microscopy (SEM), backscattered electron (BSE) imaging, and molecular dynamics (MD) simulations are integrated to systematically investigate microstructural features of polymer composite systems and the governing mechanisms, including hydrogen bonding and electrostatic interactions. The results show that increasing the concentration of partially hydrolyzed polyacrylamide (HPAM) promotes hydrogen bond formation and the development of network structures; a moderate amount of surfactant strengthens interactions with polymer chains, whereas overdosing loosens the structure via electrostatic repulsion; the introduction of alkali reduces polymer connectivity, shifting the system toward an ion-dominated dispersed morphology. These insights provide a mechanistic basis for elucidating the behavior of polymer composite formulations, support enhanced chemical flooding performance, and ultimately advance the economic and efficient development of oil and gas resources.
Upper Es4 lacustrine calcareous shale in the Dongying Depression is characterized by strong pore–throat heterogeneity that limits shale-oil producibility. This study quantifies multiscale pore–throat complexity using high-pressure mercury intrusion-based fractal analysis (segmented fractal dimensions D1–D3 and a weighted comprehensive fractal dimension, Dc) and evaluates its control on oil occurrence and mobilization using low-field 2D NMR (T1–T2) and confocal microscopy before and after high-temperature, high-pressure spontaneous imbibition. Reservoirs show clear scale segmentation, with micropore fractality governing quality differentiation. Imbibition promotes desorption and redistribution from adsorbed to free oil, but effective mobilization is primarily controlled by pore–fracture connectivity: samples with well-connected networks can mobilize both adsorbed and free oil efficiently, whereas poorly connected systems exhibit desorption without effective production, implying that thermal stimulation alone is insufficient without fracture-assisted flow pathways. Movable-oil saturation decreases systematically with increasing Dc, indicating that higher roughness and tortuosity intensify capillary retention and Jamin trapping. Dc provides an actionable criterion for sweet-spot ranking and for designing stimulation–imbibition coupling and water-based EOR strategies in lacustrine calcareous shale-oil reservoirs.
Low-maturity shale is a prime target for in situ conversion (ICP), yet heating window selection remains largely empirical because pore evolution and hydrocarbon generation are rarely quantified in tandem. Nenjiang Formation shale from the Songliao Basin (TOC = 8.91%; Ro,max = 0.54%) was subjected to closed-system pyrolysis at 300–500 °C (20 °C h−1; 72 h per step). Released oil and gas and residual chloroform-extractable bitumen (“A”) were quantified, and pore evolution was characterized using 2D low-field NMR, SEM, micro-CT, and low-pressure N2 adsorption. Fractal dimensions (Ds and Dp) were derived from Frenkel–Halsey–Hill (FHH) fitting. Oil yield and bitumen “A” increased sharply above 350 °C and peaked at 375 °C, whereas gas generation accelerated above 400 °C and continued to increase to 500 °C. NMR indicates a temperature-dependent shift in retained hydrocarbons toward weaker confinement and higher mobility, with enhanced expulsion/mobility signals near 375 °C. At 375 °C, BJH pore volume and average pore diameter reached maxima (0.0675 cm3 g−1 and 15.36 nm), while Ds and Dp reached minima (2.343 and 2.444). The coincidence of peak oil expulsion with minimum fractal complexity suggests that FHH-based fractal indices provide a quantitative metric for comparing ICP heating windows in low-maturity shale.
In the process of oilfield development, the surfactant–polymer (SP) composite system has shown significant effects in enhancing oil recovery (EOR) due to its excellent interfacial activity and viscoelastic properties. However, with the continuous increase in the volume of composite flooding injection, a decline in injection–production capacity (I/P capacity) has been observed. Through the observation of frozen core slices, it was found that during the secondary composite flooding (SCF) process, a large amount of residual oil in the form of intergranular adsorption remained in the core pores. This phenomenon suggests that the displacement efficiency of the composite flooding may be affected. Research has shown that polymers undergo flocculation reactions with clay minerals (such as kaolinite, Kln) in the reservoir, leading to the formation of high-viscosity mixtures of migrating particles and crude oil (CO). These high-viscosity mixtures accumulate in local pores, making it difficult to further displace them, which causes oil trapping and negatively affects the overall displacement efficiency of secondary composite flooding (SCF). To explore this mechanism, this study used a microscopic visualization displacement model (MVDM) and microscopy techniques to observe the migration of particles during secondary composite flooding. By using kaolinite water suspension (Kln-WS) to simulate migrating particles in the reservoir, the displacement effects of the composite flooding system on the kaolinite water suspension, crude oil, and their mixtures were observed. Experimental results showed that the polymer, acting as a flocculant, promoted the flocculation of kaolinite during the displacement process, thereby increasing the viscosity of crude oil and affecting the displacement efficiency of secondary composite flooding.