Chengwu Xu

Prof. Chengwu Xu

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2024 in Information
Verified
Journal Article
Open access
PDF file
LZLing Zhao
Ling Zhao
HZhuili zhang
huili zhang
XSxianda sun
xianda sun
OZOuyang Zhao Zhuo
Ouyang Zhao Zhuo
CXChengwu Xu
Chengwu Xu
XQXudong Qin
Xudong Qin
The convolutional neural network (CNN) algorithm in deep learning has been widely applied in petroleum geology research both domestically and internationally. Automated and accurate segmentation of thin-section images of rocks is foundational for in-depth analysis. However, traditional segmentation methods for reservoir rock thin sections often suffer from low accuracy and high cost. To address these issues, this paper proposes a novel segmentation algorithm based on an improved UNet network, integrating residual networks and the CBAM attention mechanism. By incorporating residual modules, the network depth is expanded, and the CBAM attention mechanism enhances the feature weighting capability during learning. Experimental results demonstrate that this method outperforms traditional approaches in both segmentation accuracy and efficiency, representing significant advancements in reservoir rock thin-section image segmentation.

2 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
XSxianda sun
xianda sun
LSLimin Suo
Limin Suo
YHYuanjing Huang
Yuanjing Huang
HWHongyu Wang
Hongyu Wang
HYHan Yu
Han Yu
TLTao Liu
Tao Liu
After polymer flooding, the heterogeneity between different layers intensifies, forming intricate seepage channels and fluid diversions, which results in decreased circulation efficiency and lower recovery rates, leaving a significant amount of residual oil trapped within the reservoir. Understanding the characteristics of residual oil occurrence is crucial for enhancing oil recovery post-polymer flooding. This study focused on sandstone reservoirs with varying permeability in the Saertu block of the Daqing oilfield. Using cryosectioning and laser scanning confocal microscopy, the occurrence characteristics of the residual oil in these sandstone reservoirs post-polymer flooding were investigated. Additionally, micro-CT and scanning electron microscopy were employed to analyze the impact of the pore structure on the distribution characteristics of the residual oil. The results indicate that laser scanning confocal images reveal that post-polymer flooding, the residual oil in high- and low-permeability sandstone reservoirs predominantly exists in a bound state (average > 47%), mostly as particle-adsorbed oil. In contrast, the residual oil in medium-permeability reservoirs is primarily in a free state (average > 49%), mostly as intergranular-adsorbed oil. In high-permeability sandstone reservoirs, heavy oil components are mainly in a particle-adsorbed form; in medium-permeability sandstone reservoirs, residual oil predominantly consists of heavy components, with most light components occurring in a clustered form; in low-permeability sandstone reservoirs, clustered residual oil exists in a balanced coexistence of light and heavy components, while the heavy components primarily exist in a particle-adsorbed form. Post-polymer flooding, the large pore–throat structure in high-permeability sandstone reservoirs results in effective displacement and less free residual oil; medium-permeability sandstone reservoirs, with medium–large pores and throats, have preferential channels and fine particles blocking the throats, leading to some unswept pores and more free residual oil; low-permeability sandstone reservoirs, with small pores and throats, exhibit weak displacement forces and poor mobility, resulting in more bound residual oil. The distribution and content of clay particles and clay minerals, along with the complex microscopic pore structure, are the main factors causing the differences in the residual oil occurrence states in sandstones with varying permeability.

29 September 2024 in Polymers
Verified
Journal Article
Open access
PDF file
LZLing Zhao
Ling Zhao
XSxianda sun
xianda sun
HZhuili zhang
huili zhang
CXChengwu Xu
Chengwu Xu
XSXin Sui
Xin Sui
MZMaokun Zeng
Maokun Zeng
As a non-renewable resource, oil faces increasing demand, and the remaining oil recovery rates in existing oil fields still require improvement. The primary objective of this study is to investigate the impact of pore structure parameters on the distribution and recovery of residual oil after polymer flooding by constructing a digital pore network model. Using this model, the study visualizes the post-flooding state of the model with 3DMAX-9.0 software and employs a range of simulation methods, including a detailed analysis of the pore size, coordination number, pore–throat ratio, and wettability, to quantitatively assess how these parameters affect the residual oil distribution and recovery. The research shows that the change in the distribution of pore sizes leads to a decrease in cluster-shaped residual oil and an increase in columnar residual oil. An increase in the coordination number increases the core permeability and reduces the residual oil; for example, when the coordination number increases from 4.3 to 6, the polymer flooding recovery rate increases from 24.57% to 30.44%. An increase in the pore–throat ratio reduces the permeability and causes more residual oil to remain in the throat; for example, when the pore–throat ratio increases from 3.2 to 6.3, the total recovery rate decreases from 74.34% to 63.72%. When the wettability changes from oil-wet to water-wet, the type of residual oil gradually changes from the difficult-to-drive-out columnar and film-shaped to the more easily recoverable cluster-shaped; for example, when the proportion of water-wet throats increases from 0.1:0.9 to 0.6:0.4, the water flooding recovery rate increases from 35.63% to 51.35%. Both qualitative and quantitative results suggest that the digital pore network model developed in this study effectively predicts the residual oil distribution under different pore structures and provides a crucial basis for optimizing residual oil recovery strategies.

18 December 2024 in IEEE Journal of Biomedical and Health Informatics
Verified
Journal Article
Closed access
TLTianyong Liu
Tianyong Liu
ZZZhiqing Zhang
Zhiqing Zhang
GFGuojia Fan
Guojia Fan
BLBin Li
Bin Li
SZShoujun Zhou
Shoujun Zhou
FYFuxia Yang
Fuxia Yang
Three-dimensional blood vessel segmentation is an important and challenging task that faces two main difficulties: (1) blood vessel structures are small, making them hard to capture by the network, and vessel edges are difficult to segment accurately; (2) false positives are prone to occur due to the presence of artifacts and noise. This paper proposes a novel blood vessel segmentation method called MambaVesselNet. This method is based on a state-space model and employs a selective state-space time series modeling strategy to achieve a larger receptive field. To better capture fine vascular structures and accurately segment edges, this paper introduces an edge enhancement module and a feature selection module. In terms of data preprocessing, nnUNet's preprocessing strategy is adopted to ensure spatial consistency of the input data. Evaluation on three standard vascular segmentation benchmarks shows that MambaVesselNet achieves state-of-the-art performance. Specifically, on cardiovascular and liver vessel datasets, the Dice coefficient is improved by 1.38% and 2.69%, respectively. The contributions of this paper include the proposal of a new module for enhancing blood vessel edge features, the development of a feature selection module with long sequence modeling capability, and the adoption of nnUNet's data preprocessing strategy, setting a new benchmark for blood vessel segmentation technology.

23 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
XSxianda sun
xianda sun
Mengqing ZhaoMengqing Zhao
Mengqing Zhao
XFXiaoqi Fan
Xiaoqi Fan
YZYongsheng Zhang
Yongsheng Zhang
CXChengwu Xu
Chengwu Xu
GSGuoqiang Sang
Guoqiang Sang
To study the microscopic production mechanism of corner residual oil after polymer flooding, microscopic visualization oil displacement technology and COMSOL finite element numerical simulation methods were used. The influence of the viscosity and interfacial tension of the oil displacement system after polymer flooding on the movement mechanism of the corner residual oil was studied. The results show that by increasing the viscosity of the polymer, a portion of the microscopic remaining oil in the corner of the oil-wet property can be moved whereas that in the corner of the water-wet property cannot be moved at all. To move the microscopic remaining oil in the corners with water-wet properties after polymer flooding, the viscosity of the displacement fluid or the displacement speed must be increased by 100–1000 times. Decreasing the interfacial tension of the oil displacement system changed the wettability of the corner residual oil, thus increasing the wetting angle. When the interfacial tension level reached 10−2 mN/m, the degree of movement of the remaining oil in the corner reached a maximum. If the interfacial tension is reduced, the degree of production of the residual oil in the corner does not change significantly. The microscopic production mechanism of the corner residual oil after polymer flooding expands the scope of the displacement streamlines in the corner.

21 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YMYingjie Meng
Yingjie Meng
CXChengwu Xu
Chengwu Xu
TLTing ting Li
Ting ting Li
TLTianyong Liu
Tianyong Liu
LTLu Tang
Lu Tang
JZJinyou Zhang
Jinyou Zhang
Total organic carbon (TOC) content is an important parameter for evaluating the abundance of organic matter in, and the hydrocarbon production capacity, of shale. Currently, no prediction method is applicable to all geological conditions, so exploring an efficient and accurate prediction method suitable for the study area is of great significance. In this study, for the shale of the Qingshankou Formation of the Gulong Sag in the Songliao Basin, TOC content prediction models using various machine learning algorithms are established and compared based on measured data, principal component analysis, and the particle swarm optimization algorithm. The results showed that GR, AC, DEN, CNL, LLS, and LLD are the most sensitive parameters using the Pearson correlation coefficient. The four principal components were also identified as input features through PCA processing. The XGBoost prediction model, established after selecting the parameters through PSO intelligence, had the highest accuracy with an R2 and RMSE of 0.90 and 0.1545, respectively, which are superior to the values of the other models. This model is suitable for the prediction of TOC content and provides effective technical support for shale oil exploration and development in the study area.