The stacking of two-dimensional atomic-level thickness materials onto hexagonal boron nitride (h-BN) and graphene (Gr) not only significantly enhances their properties, but also exhibits a multitude of exceptional characteristics, promising widespread applications across various fields. Clay minerals hold profound significance in scientific research not only because of their abundance but also because of their application in geology, environmental science, materials science, and biotechnology. We present a study that uses density functional theory (DFT) to analyze the effect on the mechanical properties of lizardite slab-reinforced Gr or h-BN monolayers. In addition to the reference lizardite slab (Liza-2D), six composites were studied: a monolayer of Gr (h-BN) over the octahedral face of a pristine lizardite slab (Liza-Gr1 (Liza-BN1)), a monolayer of Gr (h-BN) under the tetrahedral face of a pristine lizardite slab (Liza-Gr2(Liza-BN2)), and a pristine lizardite slab sandwiched between two Gr (h-BN) monolayers (Liza-Gr3(Liza-BN3)). We observed that reinforcement by Gr or h-BN significantly increased the bulk, Young’s and shear moduli of the composites. Taking into account that the Gr and h-BN sheets interact weakly by van der Waals interactions with the lizardite slab surface, we estimated the Young’s and shear moduli of the composites by the Rule of Mixtures and obtained a reasonable agreement with those from DFT calculations.
The SMA mixtures are characterized by a high void ratio, which favors binder draindown. In order to avoid this effect, fibers are added to the mixture, which in this case came from Curauá da Amazônia (Ananas erectifolius). The final composition studied resulted in 75% coarse aggregate, 15% fine aggregate, 10% filler, 0.3% of the Curauá fiber residue, and CAP contents equal to 6.50% and 6.88% for the formulations with SMA-Crushed Stone (reference) and SMA-construction and demolition waste (alternative), respectively. The results showed for the Tensile Strength that the composites with CDW reached higher results. The Resilient Modulus values presented small variations for the set of compositions in all loading levels at a temperature of 25°C. However, at a temperature of 40°C, the aforementioned parameter presented decreases in both researched formulations. In general, at all levels examined, higher results were observed for the alternative mixture (SMA-CDW). It is noteworthy the highest results of this parameter when comparing the compositions with the Curauá fiber residue and the formulations mentioned in the literature, with the presence of other types of fibers. Regarding the increase in temperature, there was a decrease in results for both mechanical parameters (TS, DM), but with lower losses for the SMA-RCD composition.
1 February 2020 in International Journal for Innovation Education and Research
Este trabalho avalia o comportamento mecânico do concreto asfáltico embebido em grafite natural (CA-GRAFP) de um aparelho de flexão de 4 pontos. Os modelos experimentais apresentaram frequências de 0,1 Hz, 0,2 Hz, 0,5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz e 20 Hz e temperaturas de 0 ° C a 40 ° C em incrementos de 5 ° C conforme EN 12697 -26. O objetivo foi avaliar o uso de grafite natural na substituição de uma carga tradicional, bem como avaliar as propriedades relacionadas à rigidez resultante de inúmeras combinações de carga. Os resultados mostraram que as amostras de concreto asfáltico embebido em grafite (CA-GRAFP) tiveram um aumento no seu módulo elástico quando comparado ao concreto asfáltico de referência (CA-REF) à medida que a frequência e a temperatura aumentaram.
This study investigated the environmental and performance benefits of using reclaimed asphalt pavement (RAP) in street construction, emphasizing its role in reducing greenhouse gas emissions and promoting sustainable practices. The performance of newly constructed asphalt layers by incorporating technological control, the functional parameters, and a life cycle assessment (LCA) of asphalt mixture production are evaluate. By combining natural aggregates, asphalt binder, and RAP, produced at lower temperatures than conventional mixes, the study demonstrated a 24.9% reduction in greenhouse gas emissions, along with decreased natural material consumption. Technological control focused on the degree of compaction (DC), whereas functional performance was assessed using the International Roughness Index (IRI) and macrotexture tests. Among the 26 streets analyzed, 69% met the National Department of Transportation Infrastructure (DNIT) standards, with IRI results ranging from regular to excellent. According to ASTM E1926-08, 65% of streets were suitable for speeds of 100–120 km h −1 , whereas only 4% supported speeds below 90 km h −1 . Macrotexture tests revealed that 62.5% of the pavements had a medium texture, ensuring safe traffic conditions. LCA highlighted the significant reduction in Global Warming Potential (GWP) achieved through RAP, as well as its economic advantages, such as lower energy demand and reduced reliance on virgin materials. These findings underscore RAP’s dual benefit: enhancing pavement sustainability while maintaining high-performance standards, making it a viable solution for eco-conscious infrastructure projects.