This paper presents a parametric investigation of an oscillating-cylinder turbine concept based on vortex-induced vibrations. The parametric space includes four parameters: the Reynolds number, the mass ratio, the dimensionless stiffness, and the dimensionless damping. The damping–stiffness space is explored for four different mass ratios at a fixed Reynolds number of 200. Also, the influence of the parameters on the amplitude of cylinder displacement and on the efficiency of power harnessing is discussed. Vortex-shedding patterns observed within the parametric space are investigated. The 2S, 2P, and C(2S) wake modes are observed and are related to turbine performance. Preliminary results show a maximum efficiency of 10.6%, which is obtained with low mass ratios.
Background: The authors report the relevance of using a point of care test (Helge®) for free hemoglobin determination and concordance of the values the with Cobas® 8000 and spectrophotometer method...
A fully passive oscillating foil turbine on a swinging arm in a tandem configuration consisting of two NACA 0015 foils at both ends of its arm and operating in an incompressible flow at a Reynolds number of is investigated with numerical simulations. The turbine is free to oscillate passively in response to hydrodynamic forces and structural reactions from springs and dampers. The passive motion of the tandem turbine arises from a transfer of energy from the flow, and this motion is solved using a fluid-structure algorithm coupling the Newtonian dynamics of the system with two-dimensional, unsteady, and Reynolds-averaged Navier–Stokes equations. The performance metrics, i.e., the efficiency and power coefficient, of the proposed turbine concept are explored with a momentum gradient ascent algorithm, which uses the near-optimal configuration of an equivalent single-foil concept from a previous study as a starting point. These starting configurations consist of tandem foils operating either under coupled flutter or stall flutter instabilities. The use of gears to adjust the equilibrium position of the pitching motion is also considered, resulting in a total of four baseline configurations. The best configuration found with the gradient ascent algorithm presents an efficiency value near and a power coefficient of , showing the great potential of fully passive oscillating foil turbines operating in a tandem configuration and providing valuable insight for further development of this technology through three-dimensional simulations and prototype testing.
This paper presents a modular multiphysics framework developed for OpenFOAM. The framework is built around an iterative implicit coupling scheme based on a multi-region partitioned approach. This scheme allows the implementation of formal implicit time-marching schemes, which improves the stability of strongly interacting coupled problems. This methodology allows physical interactions to be handled through specifically designed interface boundary conditions. It also allows region-specific solvers to be implemented as modular class solvers. The coupling methodology is handled with a main program that manages solver-specific actions. The aim of this framework is to facilitate the implementation and testing of new multiphysics coupling problems in an integrated code structure. To show the capabilities of the framework to integrate new physics, solvers and boundary conditions requirements are discussed. Also, three validated examples involving fluid-structure interactions, conjugate heat transfer, and fluid-structure-thermal interactions are presented. Although all these problems are boundary-coupled multiphysics problems, the framework is conceptually not limited to this kind of problems. The benefit of this work to the OpenFOAM community is a general and modular framework that facilitates the setup and solution of diversified multiphysics problems, and that illustrates the implementation of modular interface boundary conditions between physics regions.
A NACA 0015 airfoil is connected to a swinging arm by springs and dampers and is let loose in an incompressible and viscous flow at a Reynolds number of . The foil operates in a power-extracting regime and is free to pitch about a pivot that is itself swinging on a circular path; this contraption is called a fully passive oscillating-foil turbine on a swinging arm. This study explores the potential of four different foil configurations: with the swinging arm being either upstream or downstream of its pivot, and with or without the use of gears to control the equilibrium position of the foil with respect to the flow. The results show that the swinging arm concept offers similar performances, i.e., efficiency and power coefficient, as the railed turbine. Indeed, with arm lengths from 3 to 10 chords, efficiency values near and power coefficients reaching are obtained. Both the railed and the swinging arm turbines can operate under either a stall-flutter or a coupled-flutter instability. However, it is found that the geared models are the only ones suited when the driving mechanism is the coupled-flutter instability while both geared and gearless configurations are effective under the stall-flutter instability.