Helical gearboxes play a critical role in power transmission of industrial applications. They are vulnerable to various faults due to long-term and heavy-duty operating conditions. To improve the safety and reliability of helical gearboxes, it is necessary to monitor their health conditions and diagnose various types of faults. The conventional measurements for gearbox fault diagnosis mainly include lubricant analysis, vibration, airborne acoustics, thermal images, electrical signals, etc. However, a single domain measurement may lead to unreliable fault diagnosis and the contact installation of transducers is not always accessible, especially in harsh and dangerous environments. In this article, a Compressive Sensing (CS)-based Dual-Channel Convolutional Neural Network (CNN) method was proposed to accurately and intelligently diagnose common gearbox faults based on two complementary non-contact measurements (thermal images and acoustic signals) from a mobile phone. The raw acoustic signals were analysed by the Modulation Signal Bispectrum (MSB) to highlight the coupled modulation components relating to gear faults and suppress the irrelevant components and random noise, which generates a series of two-dimensional matrices as sparse MSB magnitude images. Then, CS was used to reduce the image redundancy but retain key information owing to the high sparsity of thermal images and acoustic MSB images, which significantly accelerates the CNN training speed. The experimental results convincingly demonstrate that the proposed CS-based Dual-Channel CNN method significantly improves the diagnostic accuracy (99.39% on average) of industrial helical gearbox faults compared to the single-channel ones.

To realize the accurate fault detection of rolling element bearings, a novel fault detection method based on non-stationary vibration signal analysis using weighted average ensemble empirical mode decomposition (WAEEMD) and modulation signal bispectrum (MSB) is proposed in this paper. Bispectrum is a third-order statistic, which can not only effectively suppress Gaussian noise, but also help identify phase coupling. However, it cannot effectively decompose the modulation components which are inherent in vibration signals. To alleviate this issue, MSB based on the modulation characteristics of the signals is developed for demodulation and noise reduction. Still, the direct application of MSB has some interfering frequency components when extracting fault features from non-stationary signals. Ensemble empirical mode decomposition (EEMD) is an advanced nonlinear and non-stationary signal processing approach that can decompose the signal into a list of stationary intrinsic mode functions (IMFs). The proposed method takes advantage of WAEEMD and MSB for bearing fault diagnosis based on vibration signature analysis. Firstly, the vibration signal is decomposed into IMFs with a different frequency band using EEMD. Then, the IMFs are reconstructed into a new signal by the weighted average method, called WAEEMD, based on Teager energy kurtosis (TEK). Finally, MSB is applied to decompose the modulated components in the reconstructed signal and extract the fault characteristic frequencies for fault detection. Furthermore, the efficiency and performance of the proposed WAEEMD-MSB approach is demonstrated on the fault diagnosis for a motor bearing outer race fault and a gearbox bearing inner race fault. The experimental results verify that the WAEEMD-MSB has superior performance over conventional MSB and EEMD-MSB in extracting fault features and has precise and effective advantages for rolling element bearing fault detection.

Thanks to the fast development of micro-electro-mechanical systems (MEMS) technologies, MEMS accelerometers show great potentialities for machine condition monitoring. To overcome the problems of a poor signal to noise ratio (SNR), complicated modulation, and high costs of vibration measurement and computation using conventional integrated electronics piezoelectric accelerometers, a triaxial MEMS accelerometer-based on-rotor sensing (ORS) technology was developed in this study. With wireless data transmission capability, the ORS unit can be mounted on a rotating rotor to obtain both rotational and transverse dynamics of the rotor with a high SNR. The orthogonal outputs lead to a construction method of analytic signals in the time domain, which is versatile in fault detection and diagnosis of rotating machines. Two case studies based on an induction motor were carried out, which demonstrated that incipient bearing defect and half-broken rotor bar can be effectively diagnosed by the proposed measurement and analysis methods. Comparatively, vibration signals from translational on-casing accelerometers are less capable of detecting such faults. This demonstrates the superiority of the ORS vibrations in fault detection of rotating machines.