Global trends of promoting a healthy lifestyle through a balanced diet and reducing the consumption of animal products and high-fat-content foods have contributed to the creation of new mayonnaise-like products. The aim of the study was to develop a technology for low-fat mayonnaise containing 30% sunflower oil. Canned white bean aquafaba was used as a plant-based emulsifier to create an egg-free sauce. To maintain the texture and rheological properties of the food emulsion, a water-soluble polymer such as carboxymethylcellulose was used as a thickener and a pectin–xanthan mixture was used as a gelling agent. The ratio of the main ingredients of the emulsion emulsifier/stabilizer/thickener was 3:0.7:0.3 (%). The prepared emulsion-like sauce was characterized by high sedimentation stability at the level of 98%, as well as acidity equal to 0.691 g of acetic acid equivalent per 100 g sample and pH = 3.66. The volume droplet size distribution had a mean particle size of 8.4 μm and a SPAN factor of 1.7 µm, indicating typical values for these parameters of a well-homogenized mayonnaise-like emulsion. Rheological studies made it possible to classify the samples as viscoelastic systems with a pseudoplastic flow pattern and a sufficiently high yield shear stress value equal to 132 Pa as a quantitative parameter confirming the stability of the microstructure over time. Sensory analysis confirmed high scores for consistency, taste and smell of the end-product.
Currently, there is an increasing trend towards the use of legumes aquafaba-based emulsions for food applications. In this study, emulsions containing 30 and 60% sunflower oil with lentil aquafaba (LA) were developed, and xanthan or pregelatinized corn starch were added as stabilizers. Preliminary studies of lentil technological properties enabled the optimization of aquafaba production, achieving a dry matter content of 5.5% and a protein concentration of 1.1%. Emulsions with 0.5 and 0.8% aquafaba lentil protein without and with the addition of xanthan gum (0.1 and 0.2%) or starch (1 and 2%) were studied. Increasing the xanthan and starch content resulted in an increase in the average droplet size for emulsions with 30% oil and a decrease in the values for emulsions with 60% oil. For emulsions with a lower oil content, there was a visual instability over time with the addition of starch, which led to emulsion degradation. Rheological studies made it possible to classify the samples as a non-Newtonian fluid with a pseudoplastic flow pattern. The stability of the emulsions was observed due to an increase in the viscosity of the continuous phase due to the inclusion of the stabilizer. The influence of the nature of the stabilizer on this process is confirmed by calculations using various rheological models. Food emulsions obtained using lentil aquafaba are a promising ingredient in the development of emulsion food formulations.
In this study, beans aquafaba was used as the emulsifying agent for oil-in-water (o/w) emulsions with sunflower oil concentrations of 30% and 60%. The primary approach to stabilizing such emulsions is by increasing their viscosity through the incorporation of selected polysaccharides. For this purpose, xanthan gum or pregelatinized corn starch were added as stabilizers. The effects of oil content and different stabilizers on the microstructure and rheological properties were evaluated using laser diffraction and rotational viscometry. A pre-optimized seed-to-water ratio of 1:1.5 yielded beans aquafaba with a protein concentration of 0.5%. Further evaporation was used to increase the protein content to 0.8%. The aquafaba-based emulsion samples exhibited a bimodal particle size distribution. An increase in both oil and xanthan gum content had minimal impact on the mean volume diameter of emulsion particles, whereas the addition of pregelatinized corn starch significantly increased this value. All emulsions exhibited pseudoplastic flow behavior. The flow curves were approximated using the power-law and Herschel–Bulkley models. The calculated dynamic yield shear stresses consistently increased with increasing content of both oil and stabilizer in the range from 0.3 to 5.0 Pa. It is worth noting that in emulsions with an oil content of 30%, the addition of xanthan gum had a significant impact on this indicator, while in emulsions with an oil content of 60%, the addition of pregelatinized corn starch had a greater impact. Consequently, higher concentrations of the selected polysaccharides led to the formation of more viscous systems exhibiting enhanced stability. The developed food emulsions based on beans aquafaba are a promising technology in the development of vegetarian products.