Velocity profiles upstream and downstream of two aquatic plant species that are similar in morphology but differ in patch structures were measured in a natural river. Turbulence statistics were analyzed after thorough data filtering. In the wake of the M. alterniflorum, which was a slender, 0.3 m wide and 1.2 m long patch of aspect ratio 1:4, there were distinctive peaks in both, turbulence intensity and turbulent kinetic energy, which indicated increased lateral mixing. In contrast to the M. alterniflorum, turbulence statistics in the wake of the M. spicatum, which was the larger, 2 m wide and 2.4 m long patch of aspect ratio 1:1.5, indicated increased lateral shear of a greater magnitude. The turbulent kinetic energy was diminished in the closest layer to the bed downstream the both plants, although, in the case of M. alterniflorum, the observed values were similar to those upstream. The occurrence of the mixing layer below the height of M. spicatum was visible in the power spectral density plot. In both cases, ejections in the wake diminished in favor of other coherent structures. The shape and configuration of a patch are decisive factors governing the occurrence of flow instabilities downstream of the patch.
This paper presents a basic model that shows the relationship between the diameter of a stem and its flexural rigidity. The model was developed from experimental measurements of biomechanical traits (i.e., tensile and bending traits like maximum forces, stresses, moduli of elasticity, flexural rigidity, strain) of three freshwater macrophyte species (Elodea canadensis Michx., Potamogeton pectinatus L., and P. crispus L.), reflecting the seasonal changes in plant biomechanics throughout the vegetative season. These were obtained with the use of a bench-top testing machine in 2016 and 2017. The presented calculations are based on the ratio of drag-to-bending forces, in which the flexural rigidity plays a key role. The proposed model has the form EI = adb, and two approaches based on a regression analysis were applied to determine the parameters of the model—a and b. In the first method, the parameters were identified separately for each day of measurement, while in the second method, the coefficient b was calculated for all data from all days as a unified number for individual plants. The results suggest that coefficient b may provide information about the proportion of changes in drag forces depending on plant stiffness. The values of this coefficient were associated with the shape of the stem cross-section. The more circular the cross-section, the closer the value of the parameter was to 1. The parameter values were 1.60 for E. canadensis, 1.98 for P. pectinatus, and 2.46 for P. crispus. Moreover, this value also depended on the density of the cross-section structure. Most of the results showed that with an increase in stem diameter, the ratio between the drag and bending forces decreased, which led to fewer differences between these two forces. The model application may be introduced in many laboratory measurements of flow–biota interactions as well as in aquatic plant management applications. The implementation of these results in control methods for hydrophytes may help in mitigating floods caused by increases to a river channel’s resistance due to the occurrence of plants.
Long-duration measurements were performed in two sandy bed rivers, and three-dimensional (3D) flow velocity and bottom elevation changes were measured in a vegetated area and in a clear region of a river. Detailed flow velocity profiles downstream and upstream of a single specimen of Potamogeton pectinatus L. were obtained and the bed morphology was assessed. Potamogeton plants gathered from each river were subjected to tensile and bending tests. The results show that the existence of the plants was influenced by both bottom and flow conditions, as the plants were located where water velocity was lower by 12% to 16% in comparison to clear region. The characteristics of the flow and sand forms depended on the cross-sectional arrangement of the river, e.g., dunes were approximately four times higher in the middle of the river than in vegetated regions near the bank. Furthermore, the studied hydrophytes were too sparse to affect water flow and had no discernible impact on the sand forms’ movements. The turbulent kinetic energy downstream of a single plant was reduced by approximately 25%. Additionally, the plants’ biomechanical characteristics and morphology were found to have adjusted to match the river conditions.